Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba in Chikodi taluka of Belagavi Dist under 4059-PW-Works-2024-25

Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (GROUND FLOOR)

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing two bulb underreemed pile foundaation upto maximum 3.5m depth including hire charges of machinearies digging the pile holes, labour charges and laying 20mm and down size RCC M 25 keeping the...

2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8%

---- including cost of all materials, labor ,HOM,l

2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- including cost of all materials, labor ,HOM,l

Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%

---- including cost of all materials, labor ,HOM,l

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- including cost of all materials, labor ,HOM,l

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- including cost of all materials, labor ,HOM,l

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

---- including cost of all materials, labor ,HOM,l

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- including cost of all materials, labor ,HOM,l

5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size)...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and s...

12.57 Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alroun...

12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

Providing & fixing of 2track 2panel sliding windows made out of multi

chambered UPVC Matching to RAL9016 sections and with minimum

TiO2(Titanium Dioxide) at 6PHR with TPEThermo Plastic Elastomer and...

11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed t...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement...

9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, ...

9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufa...

8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including on...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved ste...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

---- including cost of all materials, labor ,HOM,l

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- including cost of all materials, labor ,HOM,l

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- including cost of all materials, labor ,HO...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- including cost of all materials, labor ,HOM,l

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

---- including cost of all materials, labor ,HOM,l

12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

---- including cost of...

4.0 ANTI-TERMITE TREATMENT

4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

Providing and fixing Green board for class room (Quotation rate)

---- including cost of all materials, labor ,HOM,l

Providing flooring with 25mm thick polished Cuddapah slabs usingcement mortar 1:6, 25mm thick over existing cement concrete bed ortop of roof laid to line and level and jointed with cement slurry mixe...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

A-19 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (Volume 2 Material component S.No.245, P.No. A-19)

---- including cost of all materials, labor ,HOM,l

Providing two bulb underreemed pile foundation upto maximum 5m depth including hire charges of machineries digging the pile holes, labour charges and laying 20mm and down size jelly RCC M 20 keeping t...

---- including cost of all materials, labor ,HOM,l

8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing t...

Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (FIRST FLOOR)

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- including cost of all materials, labor ,HOM,l

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- including cost of all materials, labor ,HOM,l

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and s...

12.57 Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alroun...

12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including on...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

---- including cost of all materials, labor ,HOM,l

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- including cost of all materials, labor ,HOM,l

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- including cost of all materials, labor ,HO...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- including cost of all materials, labor ,HOM,l

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

---- including cost of all materials, labor ,HOM,l

Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (ELECTRICAL WORK)

SupplyingPVCflexibleconduitpipe.mmdiafixingonsurfaceoverinvertedtaperedwoodenplugsorphillplugsorrawlplugsandclampedusingheavygaugesaddlesatanintervalof300mmusingNFscrews and on either end of the pipe ...

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. ---- including ...

Supplying and wiring adopting loop systeminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVCinsulatedcopperwire(confirmingtoIS694:andlatestamendments...

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

---- including cost of all materials, labor ,HOM,l

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall"

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall"

Supplying and flush mounting powder coated / galvanized

metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall"

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

Using Group "A" materials

---- including cost of all mater...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

Stepped Fan Regulator.

---- including cost of all materials, labor ,HOM,l

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

16Amps one way switch

---- including cost of all materials, labor ,HOM,l

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

32Amps DP switch

---- including cost of all materials, labor ,HOM,l

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

6/16Amps universal socket

---- including cost of all materials, labor ,HOM...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

6Amps 3way socket.

---- including cost of all materials, labor ,HOM,l

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0.9 a...

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden/panel using necessary nuts, bolts and

washers.32Amps ---- including cost of all materials, labor ,HOM,l

Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross3withShortcircuitbreakingcapacityof10Kandcompletewiringas...

Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross3withShortcircuitbreakingcapacityof10Kandcompletewiringas...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsalta...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Supply and fixing polished wood board made of not less

than 15mm thick plank on both sides of not more than 2

pieces and fixing the same to the wall using tapered inverted wooden plugs screws.8"x6"1.5...

Supply and fixing polished wood board made of not less

than 15mm thick plank on both sides of not more than 2

pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12"x12"2...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling /wall mounting fan of all capacities and all

types, with necessary clA and 'S' hook made out of 15mm dia

MS rod, with 5 A. ceiling rose of approved quality with

necessary length of 23...

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying heav gauge PVC conduit pipe mm dia.mm thick confirming to IS 2509 with suitable size bends,metal/PVC Junction boxes, adhesive paste etc. and running before concreting the slab.The conduit sh...

Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School Examba (Furnitures)

Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak e...

Teak wood Chair (Heavy model): Seat with taek wood planks or cushion. Made out of teak wood chair 3''x1.25'' back legs 2.25''x2.25'' front legs chair side side bars 3''x1.25'' back with 8 reapers. Cha...