Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC COURT ROAD SURATGARH 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹22.5 L+₹2.2 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹23.1 L+₹2.8 L (13.7%)Rejected-Finance 36 THE MALL FEROZEPUR CANTT 152001 | FEROZEPUR CANTT | FEROZEPUR | PUNJAB | 152001 | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹23.2 L+₹3.0 L (14.6%)Rejected-Finance | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹23.9 L+₹3.6 L (17.7%)Rejected-Finance M S CHANANA ENGINEERS CONTRACTORS AZAD CHOWK FEROZEPUR CANTT FEROZEPUR PUNJAB 152001 | FIROZEPUR | PUNJAB | 152001 | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹24.3 L
EMD Value
₹48,500
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East ) Ferozepur Cantt
GE (East ) Ferozepur Cantt
SPL REPAIR TO BLDG NO P-08 OTM ACCN OF GARH RIF UNDER GE (EAST ) FEROZEPUR CANTT
2022_MES_554009_1
8033/GE/E/FZR/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
GE (East ) Ferozepur Cantt
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (East ) Ferozepur Cantt
₹48,500
Yes
10 Nov 2022
23 Sept 2022
15 Oct 2022
23 Sept 2022
13 Oct 2022
8 Oct 2022
Amount
B/R Work Demolition of un-reinforced cement concrete below or above ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
S&F white non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified & directed.
M & L Glazed Ceramic coloured tiles 300mm x 200mm x 7 mm thick primium quality on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified & directed.
M&L machine cut kota stone flooring 20-25mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified.
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.
M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished fair and even complete all as specified & directed.
M & L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified & directed.
M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished fair and even as in ceiling complete all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint complete all as specified & directed.
M & L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper complete all as specified & directed.
M & L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified & directed.
M & L for complete removal of existing treatment on wall and applying two coats of oil Bound distemper over coat of chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed.
M & L for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified & directed.
Complete removal of existing treatment over old surface, preparation of surface and applying two coatS of Cement base paint on walls complete all as specified & directed.
Complete removal of existing treatment over old surface, preparation of surface and applying two coats of white wash on walls complete all as specified & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified & directed.
All as per item No 18 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each.
Taking down shutter of any description exe 1 sqm and not exc 2 Sqm complete all as specified & directed.
Re-securing or easing and adjusting of shutters of any description of exceeding 1 sqm but not exc 2 Sqm each complete all as specified & directed.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified & directed.
M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etccomplete all as specified & directed.
M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified.
S&F 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified & directed.
S & F 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I in Section-8 complete all as specified & directed.
S & F Pressed handle of mild steel, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified & directed.
S & F Barrel tower bolts of mild steel, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified & directed.
S & F Sliding door bolts of mild steel, 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.
M & L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.
M & L solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). complete all as specified & directed.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and shown on drg No CEJZ/TD-1019/E8 & CEJZ/TD-1020/ E8.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and shown on drg No CEJZ/TD-1019/E8 & CEJZ/TD-1020/ E8.
S & F Mild steel, fixed type ventilaters including projecting type hinges with steel handle and steel peg stay, complete with sash bars, dovetailed or welded complete all as specified & directed.
S & F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified & directed.
S & F Figured glass, 3mm thick, pin headed type and glazing with oil putty in squares not exceeding 0.50 square metre each pane complete all as specified & directed.
S & F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.
S & F 300 mm Mild steel helical door spring including roller and roller plate complete all as sepcified and directed
M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified & directed.
M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified.
M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint on primed surfce including preparation of surfaces complete all as specified.
M& L for Preparation of old decorated surface of steel and iron of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M& L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified & directed.
S & F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.
S & F PTMT handle 125mm long fixed with steel screws complete all as specified & directed.
S&F Water storage tanks 1000 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as specified & directed.
S & F Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,complete all as specified & directed.
S & F Gun metal Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified & directed.
S & F Gun metal Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified & directed.
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified & directed.
All as per item No 51 herein before but 20 mm bore tubing.
S & F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
All as per item above 53 herein before but 20 mm bore tubing.
S & F in repair Stop valve of cast copper alloy chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified & directed.
All as item No 55 herein before but fancy type, chromium plated with long shank and cup (concelled type)
S & F in repair Bib tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.
S&F in Repair to Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed
Supply & Fix in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as specified & directed.
S & F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.
S & F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified & directed.
S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified & directed.
S & F PVC connection 15 mm size PTMT nuts of length 450 mm fixed complete all as specified & directed.
S & F in repair PVC waste pipe of 32 mm dia for Wash Hand basin/Urinals etc complete all as specified & directed.
S&F in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40 gms) complete all as specified & directed.
S & F Shelf of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 300 gms) complete all as specified & directed.
S & F Towel rail 450 mm long of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms) complete all as specified & directed.
Dismantling CI pipe/any type alongwith fittings of 75/100mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified & directed.
S & F PVC (SWR) pipes, Single socketed, of 110mm dia, in any length with rubber ring jointed in cement mortar and laid in trenches or in floors complete all as specified & directed.
All as per item above 71 hereinbefore but 75 mm dia pipe.
S & F PVC (SWR) pipes, Single socketed, of 110mm dia,, in any length with rubber ring jointed in cement mortar and fixed to walls complete all as specified & directed.
All as per item above 73 hereinbefore but 75 mm dia pipe.
S & F PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortarcomplete all as specified & directed.
All as per item 75 above here-in-before but 75mm bore.
S & F PVC (SWR), floor trap, 75mm bore, Plain with grating including jointing with solvent cement complete all as specified & directed.
S & F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm complete all as specified & directed.
S & F PVC (SWR) junction single, (single T) equal or unequal 110 mm complete all as specified & directed.
S & F PVC (SWR) vent cowl 110 mm complete all as specified & directed.
S&F PVC rain water pipes 100mm bore fixed to walls with and including MS clamps complete all as specified & directed.
Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified & directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified & directed.
M & L 10mm plaster in CM(1:4) finished even and smooth with using extra cement on bottom layer of batten roof using water proofing compound as per manufacturers instruction or 3% by weight of cement whichever is more (in case of re placement of bottom layer tile) complete all as specified & directed.( Note: WPC shall be measured and separately)
Supply only integral water proofing compound complete all as specified.
M & L a tack coat of industrial bitumen 85/25 @ 1.50 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified & directed.
M & L 150 micron polythene film including preparation of roof surfaces complete all as specified & directed.
M & L for Mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified & directed.
M & L Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush complete all as specified & directed.
All as per item No 89 above but except brick tiles complete all as specified & directed.
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified & directed.
M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified & directed.
M&L All as per item 92 above here-in-before but using old bricks retrieved from demolition under item above here-in-before including cleaning and removal of mortar from old bricks.
M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified & directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.
M&L Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified & directed.
M&L for laying APP based polymeric membrane 3mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces of Sunken portion ,complete all as specified and as directed.
M & L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surface of sunken portion wall and floor using water proofing compound as per manufacturers instruction or 3% by weight of cement whichever is more (in case of re placement of bottom layer tile) complete all as specified & directed. (Note:- WPC shall be measured separately and paid separately )
S&F GI tubing bore 40 mm bore including fixing to walls as in spouts of sunken protion complete all as specified & directed.
M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling or in sunken portion of floor and mass concrete complete all as specified & directed.
M & L for 50 mm thick PCC (1:3:6) type C2 (using 40mm incl stone aggregate) as in plinth protection finished even and fair with 10 mm wide and 30 cm deep joints at the rate of 3 mtr centre to centre and every turning complete all as specified & directed.
M & L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm garded stone aggregate as in floor and finish the surface even and smooth without using extra cement complete all as specified & directed.
Demolition of reinforced cement concrete in any position not otherwise specially provided including reinforcement cut as required to facilitate demolition prepare the surface to capting/jointing new including removing rubbish from building and thrown away low laying area complete all as specified & directed.
M & L for formwork to chullah, hooks, chajjas, troughs and similar work including edges for rough finished surface of concrete complete all as specified & directed.
M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in chajja, supported on walls, beams, roofs, landing, bolconies, canopies and in shelves and like complete all as specified & directed.
M & L TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia and including necessary welding to existing reinforcement where required all as specified and directed.
M & L TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia and including necessary welding to existing reinforcement where required all as specified and directed.
M &L for 40 mm thick precast cement conrete (1:2:4) type B0 using 12.5 mm graded stone aggregate as in louvers and jalies (measured solid) including all moulding but excluding frame and set in cement mortar (1:4) including necessary formwork complete all as specified and directed.
M &L Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified & directed.
Dismantling of boarding, any description, fixe din any positon with nails complete all as specified & directed.
M &L Pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves , rebated or flat edges including 6 mm thick teak wood leaping all-round and fixed as in repairs complete all as specified & directed.
E/M Work Taking down carefully existing copper/ alumimium point wiring for light/ fan/ socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified & directed.
Taking down unserviceable main switches, distribution boards single phase/ three phase, complete all as specified & directed.
Taking down carefully old unserviceable sub main wiring and making good disturbed sufaces and matching with existing complete all as directed and specified.
S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following:- (a) One light/ fan/ exhaust point controlled by one single pole one way switch. ( Note :- wiring shall be done in colour coding)
All as item No 115 herein before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.
All as item No 115 herein before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board.
S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.
S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed.
S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.
S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.
S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.
S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified.
S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified & directed.
S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.
S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed.
S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, partly immersed in wall, including of MCCB 4 pole adjustable thermal & fixed magnetic type 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified.
S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.
S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.
S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.
S&F Sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x10 Sqmm single core 650V/ 1100V, drawn through & including rigid PVC rigid conduit 25 mm dia including continuous earth wire of size 1x10 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour), complete all as specified. Note :- Two runs of cable, 1 run of earth wire & one run of PVC conduit shall be measured as one length.
S&F Sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650V/ 1100V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour), complete all as specified. Note:- Two runs of cable, 1 run of earth wire & one run of PVC conduit shall be measured as one length.
S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.
M & L for Cutting hole, grouting nuts & bolts for fixing of exhaust fans, making good the disturbed surface to match with existing surface complete all as specified & directed.
Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified. Note : Ceiling fans obtained/ taking down from item Sr No.112 above shall be reused.
M&L Earthing complete, all as shown on electrical plate No 3 of MES schedule part-I , as in repairs and as specified including the following :- (i) Galvanised steel earth plate of size 60cmsx60cmsx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre complete all as specified & directed.
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified & directed.
S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 35 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified & directed. (Note:- Excavation & earth work, brick protection, sand cushion shall be measured and paid separately.
Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, complete all as specified & directed.
M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. Note- Punned down thickness shall be measured.
S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified.
Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.
Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.
S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc including taking down, complete all as specified & directed.
M/s Mukand Lal Khanna
Harmesh Kumar Sharma and Sons
KAILASH CONSTRUCTION COMPANY
Chanana Engineers & Contractors
S S BUILDERS
M/s Sanjiv Kumar
R.S.ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .