Erection of 3.3KV Overhead Line by XLPE Aerial Bunch Power Cable from VIP Guest House to Regional Hospital, Nowrozabad Johilla Area

Amount

Erection/Renovation/rearrangement of 3.3KV Overhead Line by XLPE Aerial Bunch Power Cable from VIP Guest House to Regional Hospital, Nowrozabad Johilla Area for smooth operation of Solar Panel System installed at RHN.

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-7098 Part?ll, Alu. alloy messenger of approved make in air with necessary material as per specification of required size as mentioned below –11KV grade arial bunch cable, size 3 x95 + 1 x 80 sq.mm.

Supplying of pre stressed cement concrete (PCC) pole conforming to IS: 785 at work site including required transportation PCC pole 8 meter Long 140 kg

Supplying & fixing of Aerial bunch cable accessories suspension clamps i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.

Supplying & fixing of Aerial bunch cable accessories Tension clamps(Dead end) i/c required attachment for single core cable of approved make in Air with clamp, necessary material as per specification for required size.

Supplying and erection earth pit of minimum bore dia. 150mm size,approved make safe Earthing Electrode consisting Pipe-in-Pipe technology as per IS 3043-1987 made corrosion free G.I. Pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing as mentioned - With 3 mtr. Pipe of 80 mm outer dia. 40 mm inner dia and 14mm terminal dia. In soft rock/marshy soil with 50kgs. (Two Bag) Back filling Component

Providing & Making cable end termination with HEAT SHRINKABLE jointing kit complete with all accessories including lugs suitable for 33 kV/11 kV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete, Heat shrinkable joint,kit 33 kV XLPE, 3 Core, Heat shr.jointg. kit 33 kV XLPE cable O.D. termination, b. 3 x 70-120 sq. mm.

Supplying & fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure / poles

CMPS+CMPF (19.72% on 25% of sub Total from Sr.1.01 to Sr. 1.07)

Supplying and erection of stay set complete (galvanised) with19/20 mm dia X 1.8 metres long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulatoretc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

16 mm X 125 mm bolts and nuts with washers

16 mm X 150 mm bolts and nuts with washers

Supply of clamp

Erection of RCC/ PCC pole of following length in brick ballastand ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavationand refilling etc as required. Above 8.0 metre and upto 11.0 meter

Total impact of GST for the purpose of CTC

M/s. SWETA ELECTRICALS

ELECTRO ENGINEERING