External Putty, Painting and Providing/Fixing Window and Door etc. in the New GIS Building at Teesta-V Power Station.

Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:

Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.

Providing and fixing glazing in aluminium doors, window, ventilator, shutter and partitions etc with EPDM rubber / neoperene gasket etc complete as per the architectural drawing and direction of engineer-in-charge. With floot glass panes of 8.0 mm thickness (weight not less than 20kg/sqm).

Providing and fixing glazing in aluminium doors, window, ventilator, shutter and partitions etc with EPDM rubber / neoperene gasket etc complete as per the architectural drawing and direction of engineer-in-charge. With floot glass panes of 4.0 mm thickness (weight not less than 10kg/sqm).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal dia pipe.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt), sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.