PERIODICAL SERVICES AND REPAIR TO FLOORING JOINERY SANITARY FITTINGS AND INTERNAL WATER SUPPLY INCL MISC REPAIR WORKS IN OTHER MD ACCN AT 2003 STN AND REPAIR TO PETTY REPAIR ROUGH PLASTER TILLING FLOORING AND CERTAIN REPAIRS TO TOILET KITCHEN BATHRO

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified.

Dismantling floor, hearth or wall tiling any type including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.Note the area includs in this up to 4th stories building

S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified.

S & F powder coated frame sections for doors and windows approved and fixed all as specified and directed. (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S & F in repairs 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified.

S & F in repairs 105x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified.

S&F factory made soild PVC moulded door shutter 28 to 30 mm thick(stiles), with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain color pvc sheet on back face supplying and fixing in frame complete all as specified and directed

S&F PVC Door Frame for moulded door shutter of size 50mmx47mm made out of 5mm colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing.

S&F 125 mm Butt hinges, meduim weight, cold relled stainless steel and fixed complete all as specified and directed

S & F for aluminium anodised, barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F 35 mm thich 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed.

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L Glazed coloured ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed .

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L Non skid coloured endura tiles 8-10 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed Note: WPC will be measured and paid separtely

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

Taking up or down steel tubing 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S&F 15 mm bore CPVC tubes with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps central hole Basin mixer with regular spout without popup waste system with 450 mm long braided hosedd 20 mm carttridge size fancy type, cast copper alloy, chromium plated, complete all as specified and directed.

S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and directed.

S & F in repair towel ring round with round flange fancy type cromium plated fixed with PVC plug and steel screw complete all as specified and directed.

S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

M & L in repair for CP hand shower (health faucet) with 18mm dia 1.20 m long(min) flexible tube and wall hook complete all as specified and directed.

S & F in repair for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed

S & F in repair shower rose of 30x30 cm chromium plated fixing with 15mm pipe complete all as specified and directed.

S & F in repair shower rose of 20x20 cm chromium plated fixing with 15mm pipe complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back (min size 550x400 mm or as required) including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed.

S&F in repair vitreous China Squatting pan 'Orrisa'/pedestal pattren size(min size 580x440mm) white with integral foot rest, 'P' or 'S" trap cement concrete bedding complete all as specified and directed.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for Rough cast plaster on brick walls consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified & directed by Engr-in-charge. ( Ht may vary upto 2nd floor and inside the shaft area.)

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement.Note the area includs in this up to 4th stories building

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building

S&F 10-12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and directed

S&F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and directed.

S & F 600mm x 450mm mirror of thickness 5.0 mm with chromium plated brass spacers 25 to 30 mm in size in each corner including rounding the edges of the mirror and fixed-in-repairs complete all as specified

M & L for prepring old plaster surface by applying 1-2 mm thick wall care putty applying one coat Oil Bound distember on wall surface with roller brush complete all as specified and directed.

M & L for new plaster surface applying two coat Oil Bound distember on wall surface with roller brush complete all as specified and directed.

M & L for prepring old plaster surface applying one coat of oil bound distemper on ceiling surface with roller brush complete all as specified and directed.

M & L for new plaster surface applying two coats of oil bound distemper ceiling surface with roller brush complete all as specified and directed.

M&L preparing newly plastered surfaces of walls by appling wall putty 1to 1.5 mm thick, cutting/rubbing to obtained a smooth surface and

M&L preparing old Decorated/Treated/rough Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying one Coat of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L applying subsequent Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer.

M&L Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.

Taking down existing damaged APP membrane and clean the surface , frost, surface laitance and contamination and free from loose aggregate, iclean with water complete all as directed by Engr-in-Charge.

M&L for PCC 1: 2 :4 Type B-1 (using 12.5 mm graded stone aggregate) as in padding over roof slab laid to slope finished even and smooth, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. (Note : Rates are included upto G+2 Storey)

M&L for 10 mm thick cement plaster with CM 1:4 smooth finish for application of waterproof coating primer the surface clean with water complete with making the corner plain and smooth all as directed by Engr-in-Charge. (Note : Rates are included upto G+2 Storey)

Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Applying two coat of aluminium paint @ 100ml/Sqm

M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, including dismantling old steel complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified (Note : Completion shall be issued once all the debries is removed from the MOD land.)

M&L for preparation of old concrete surface of kerb stone and applying one coat of synthetic enamel paint etc complete all as specified and as directed

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site all as spcified and directed

S&F Solid PVC Wall Lining fillet consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site all as spcified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M & L for false ceiling work of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the ntermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre. ( Note : Ht may vary upto 12.0 m) complete all as specified and directed

M & L for hanging of GI. false ceiling grid with 3 mm dia GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to GI grid frame work in ceiling with clips all as specified and directed.

M&L for refixing Factory Made Machine Pressed Pre-cast Concrete Coloured 60/80 mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment complete all as specified and directed.( Except tiles)

M & L for 75 mm PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in subbase complete all as specified and dircted

M&L Factory Made Machine Pressed Pre-cast Concrete Coloured 60mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment.

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. Note:- Compacted / punned sand shall be considered for the purpose of payment.

M&L for exterior grade coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of modular kitchen shutters/cabinets including stainless steel baskets and framing complete all as specified and directed

S & F Modular shutters of PVC silica boards one side laminated of 18/19mm thick etc complete all as specified.

S&F self closing frog hinges fixed to PVC boards complete all as specified and directed

S&F Stainless steel handles 150 mm size complete all as specified and directed

M&L for Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat to cover damaged surface all as specified and directed

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed

M&Lfor Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

NEHRA ENTERPRISES (BID ID -3483646)