Construction of Principal residence at Govt Medical College at Baramulla

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and dressed.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering, lead up to 50 m and lift upto 1.5 m.

Supplying ,providing & filling with RBM/Khak bajri in trenches, plinth ,sides of foundations etc.in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming & watering .

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering. All work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, under floors, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting propping etc, and removal of form for:

Foundations, footings, bases of columns etc.for mass concrete

Suspended floors, roofs, landings, balconies, and access platforms

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars (Fe500d)

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete.

All works upto plinth level

All works above plinth level upto floor V level

Extra for providing richer mixes at all floor levels. Note: Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade R.C.C. instead of M-20 grade R.C.C.(cement content considered in M30 is@ 340 kg/cum)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick incl,opening of required size & shape for basin / kitchen sink in kitchen platform etc complete job.

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Providing of double edge moulding (18mm each) fixed with epoxy adhesive on edges of granite edge including rubbing and polishing to edges to give high gloss finish complete. Including 5mm thick strip in between.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all areas complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (avg) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge: Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). As per architectural drawings and directions of the engineer-incharge. Deodar wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Deodar wood 35 mm thick shutters

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Deodar Wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0mm thick instead of 4 mm thick

Providing and fixing of 32mm thick high density high moisture resistant (HDHMR) door shutter with, ornamental raised panels (four panels ) carved on both sides, fixed with 05mm wooden lipping on all edges as per the approved design and 04 No’s of 5 inch long steel butt hinges (12 to 14 gauge for each shutter ) with counter sunk (CSK) Gyp board screws of size 4 x 50 mm to be fixed with pre drilling of pilot bore of 2.5mm and 50mm depth hinges all complete job. (Solid Core).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Providing and fixing SS/MS spring loaded door closer for door weight upto 80 kg and door upto 1000 mm), with necessary accessories and screws etc. complete :

Providing and fixing bright finished Stainless steel tower bolts (barrel type) with necessary screws etc. complete:

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws complete:300x20x6 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and fixing aluminium/stainless steel handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc

Providing and fixing of 300 × 40 mm thick deodar wood eaves boarding to sides of M.S Truss with decorative profile as per approved design with necessary fixing arrangement all complete as per direction of engineer-in-charge.

Providing and fixing of 20mm thick 1st class deodar wood planks (toungued & Grooved) to the soffits of MS Truss with necessary framework of budloo wood 2" × 11/2" section with spacing of 450 mm × 450mm framework with necessary fittings/arrangements all complete job as per the directions of the engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate crushed

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved mak in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in walls, skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles (Double Charged) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600mm

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Supply & fixing of colour coated roofing profile sheet of nominal 1015 mm effective cover width and nominal 28 mm deep ribs with subtle square fluting in the 5 pans at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material shall be of 0.5mm Total Coated Thickness/ 0.53mm Total Painted Thickness Colorbond XRW steel-High tensile with min 550 MPa yield strength, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS1397/ IS15961 Zincalume AZ150 (min. 150 g/m2 total on both sides), roll formed from Bradbury/ Hayes make roll forming machine with Super Durable Polyester Colorbond steel XRW quality paint system of approved color, suitable for exterior application conforming to AS/NZS 2728 type-4/ IS15965 class 3 (Tata BlueScope Steel or approved equivalent make). The sheet shall have a total coating thickness of 35 microns, super durable polyester Colorbond XRW quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system would have Thermatech Solar Reflectance technology along with stable resin & inorganic pigments for paint durability and is lead free for water harvesting.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 550 mpa steel grade, metallic hot dipped coated etc using self drilling/ self tapping screws complete job for ridges, valleys etc.

15 mm cement interior plaster of mix: 1:6 (1 cement: 4 fine sand) incl all taxes etc complete job.

15 mm exterior Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incl scaffolding etc. complete job.

Providing & applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and manufacturing 100 mm POP Cornice on the edges of wall and ceiling Complete as per directions of the engineer-incharge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade & colour. Two coats

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade & colour. Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content, With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre

French spirit polishing : Two or more coats on new works including a coat of wood filler

Finishing walls with textured exterior paint of required shade as per architectural design on New work incl. scaffolding charges (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm. (All Floors) as per the directions of the engineer incharge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron/P.V.C P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, incl. 32 mm C.P. brass waste of standard pattern,15mm nominal bore of standard back type CP brass close hole basin mixer approved quality weighing not less than 1.970 Kg including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous table top wash basin size 550x400 mm. Hindware make - Cat No 91212, 91207 etc.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting, making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm min water seal, weighing not less than 260 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length and 15 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing, fixing, testing and commissioning of CP brass swan neck sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.

Providing & fixing grab bar in toilets for physically handicapped with non-slip gripping surface complete in all respects, including cutting and making good the wall wherever required.

Providing & fixing 600 mm grab rail in toilets for physically handicapped with non-slip gripping surface complete in all respects, including cutting and making good the wall wherever required.

Supply, fixing, testing and commissioning of storage type automatic electric hot water heater made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge steel tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, non return valve and pressure release valve complete in all respect including testing etc. (Horizontal/Vertical)

a)50 litres storage capacity

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Providing and fixing 8 mm dia C.P. / S.S. Health faucet with flexible tube upto 1 metre long with holder to European type W.C. of quality and make as approved by Engineer - in - charge.

Supply, fixing, testing and commissioning of unplasticized polyvinyl chloride pipes conforming to IS 13592-2013 Type B UV stabilized with rubber ring/click ring or pasted type for soil, waste discharge system inside buildings (fixed with clamps/stays etc) including jointing with rubber seal ring wirh rubber lubricant conforming to IS:5382 in case of grooved socket joints and using solvent cementing, conforming to IS 14182 for sliding socket joints and/or in tandem including all necessary minor fittings as per directions of the engineer-incharge.

a) 110 mm OD Pipes

b) 40 mm OD Pipes

c) 50 mm OD Pipes

Providing and fixing un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC Soil, waste pipes conforming to IS : 14735-1999 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

i) Coupler 110mm/50mm/40mm

ii) Collar 110mm/50mm/40mm

iii) Single Tee with door 110mm/50mm/40mm

iv) Single Tee without door 110mm/50mm/40mm

v) Bend 87.5° 110mm/50mm/40mm

vi) Reducing Cross Tee 110mm/50mm/40mm

vii) Floor Trap 110mm/50mm/40mm

viii) W. C. Connector 110mm/50mm/40mm

ix) Double Y 110mm/50mm/40mm

x) Eccentric Reducer 110mm/50mm/40mm

xi) Floor Drain 110mm/50mm/40mm

xii) Vent Cowl 110mm/50mm/40mm

xiii) Varaible bend 110mm/50mm/40mm

xiv) Door bend 110mm/50mm/40mm

xv) Cross Tee 110mm/50mm/40mm

xvi) P-Trap 110mm/50mm/40mm

xvii) SS Gratings 110mm/50mm/40mm

xviii) Clean out pipe 100mm dia

Providing and fixing 125 mm dia, 1 mm thick stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.Of JAQUAR , CERA or equivalent make.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. (including necessary insulation)

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

PN-16 pipe , 40mm OD(SDR-7.4)

PN-10 pipe , 50mm OD(SDR-11)

Providing and fixing PPR Unions

PPR Union 20mm

PPR Union 25mm

PPR Union 32mm

PPR Union 40mm

PPR Union 50mm

Providing and fixing of brass/bronze lever operated valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 10 kg/cm². UNIK/Zoloto or equivalent.

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessray holes inlet, out let and over flow pipes but without fittings and the base support for tank (circular tank)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

100 mm diameter

150 mm diameter

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround stoneware/RCC pipes including in bed for pipes to be laid in trenches as per standard details.

a)100 mm diameter

b)150 mm diameter

Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. ( excluding cost of cement) Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty ) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg): 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cutting holes up to 15x15 cm in R.C.C. floors/roofs/Beams/Walls for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and laying water proofing treatment in sunken portion of Gutters, WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying: (Tapecrete of CICO or approved equivalent) (incl. cleaning the surface and removing mulba from the surface ) (a) 1st layer of slurry of cement @ 0.488kg/ Sqm. mixed with water proofing cement compound @ 0.253kg/ Sqm. This layer will be allowed to air cure for 4hours. (b) 2nd layer of slurry of cement @ 0.242kg/ Sqm. mixed with water proofing cement compound @ 0.126 kg/ Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry but excludes cost of cement.

Providing and laying stone Dust blended with cement (10%) under sunkun portions of Bathrooms incl. compacting , watering , densifying ,all complete

Shifting of extisting water supply pipe line ( upto 100 mm dia ) to required position incl, dismentalling/ excavating/ reinstalling existing pipe and providing / fixing any addional length of pipe as required.

(All BOQ Items are incl,cost & carriage of materail complete job)

M/S SHEIKH QAMAR RAYEES

al-imran infratech