Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical GANGA NIWAS BELLOW UTTAN GAS AGENCY BCS NEW SHIMLA 171011 | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171011 | Accepted-Technical accepted |
| 2 | Accepted-Technical JAI COTTAGE VIKAS NAGAR KASUMPTI SHIMLA 171009 | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171009 | Accepted-Technical accepted |
| 3 | Accepted-Technical VILL DHAR P O PATNOUN TEH TAUNI DEVI DISTT HAMIRPUR H P | TAUNI DEVI | HAMIRPUR | HIMACHAL PRADESH | Accepted-Technical accepted |
| 4 | Accepted-Technical | Accepted-Technical accepted |
Tender Value
₹4.4 L
EMD Value
₹8,700
Closing Date
17 Sept 2026, 10:00 amClosed
Executive Engineer(Maint.)
Executive Engineer(Maint.), HPU Shimla-5
Renovation of Toilets (Ladies, Gents) outside seminar hall by providing PVC ceiling, tile work at wall and floor i/c toilet accessories alongwith pine wood paneling and PVC flooring in corridor in department of Bio-sceinces in HPU Shimla-5
2026_HPU_142303_1
Renovation of Toilet (Ladies, Gents) outside seminar hall by providing PVC ceiling, tile work at wal
Open Tender
Civil Works
Item Rate
60 days
summer hill
Please refer Tender documents.
6 documents required · 6 mandatory
₹413
Executive Engineer(Maint.)
₹8,700
6 Oct 2026
29 Aug 2026
17 Sept 2026
29 Aug 2026
17 Sept 2026
29 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres
a) Of area 3 sq. metres and below | 2 | Nos. | 156.25 | ₹312.5 |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).
a) Sal wood | - | cum | 95,763.05 | - |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Note:- Butt hinges and necessary screws shall be paid separately)
a) Second class teak wood
d) 35 mm thick shutters | 5.55 | sqm | 3,122.6 | ₹17,330.43 |
| 4 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC10 asperIS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
a) 250 X 16 mm | 3 | Nos. | 214.2 | ₹642.6 |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:
a) 150 X 10 mm | 14 | Nos. | 72.2 | ₹1,010.8 |
| 6 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
a) 100 mm | 9 | Nos. | 50.75 | ₹456.75 |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth
a) Cement mortar 1:4 (1 cement :4 coarse sand) | 3.13 | sqm | 747.65 | ₹2,340.14 |
| 8 | 15 mm cement plaster on the rough side of single or half brick wall of mix:
a) 1:4 (1 cement : 4 fine sand) | 6.25 | sqm | 211.5 | ₹1,321.88 |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : a) For fixed portion.
i)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 26.18 | Kg | 420.45 | ₹11,007.38 |
| 9.01 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
ii) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 18.5 | Kg | 482.4 | ₹8,924.4 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.51 MB
tenderdocument.pdf
Tender Documents • 18.68 MB
BOQ_211401.xls
BOQ • 0.43 MB
biodateextension.pdf
PDF • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .