Replacement of shattered partition glass and other civil works in MCSRDC Division at ARDC Premises HAL DC Bangalore

Wood and PVC work

Providing and fixing M.S.security grills/doors including hings of required pattern fixed to openings etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete with rawl plugs screws etc.

Steel work

Extra for providing grilled rolling shutters manufactured out of 8 mm dia in place of M.S. bar in place of laths in the existing rolling shutter as per design approved by Engineer-in- charge, (area of grill to be measured).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.Hot finished welded type tubes) trusses etc., including cutting, hoisting,fiXing in position in any height in sunshade protection and similar area and applying a priming coat of approved steel primer, including scaffolding, welding and bolted with special shaped washers etc. complete.

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing,balcony railing, staircase railing and similar works in anyheight including applying priming coat of approved steel primer.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels,plates etc.,including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, at ground floor level in sides of static water tank round in shape or the side of waist slab or with suitable arrangement as per approval of Engineer-in-charge, rate including removal of old M S stair case if any (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.).

Page 2 of 4

Roofing

Providing and fixing precoated galvanised iron profile sheets in sun shade protection and similar area {size,shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and required length as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontaV vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Finishing

42 mm thick/depth and 18 mm wide cement mortar band in three coats under layer 12 mm thick each layer with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand) in rain water drip mould at first floor level and similar works including scaffolding etc complete.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Page 3 of 4

Repair to building

Realigning 12 mm thick frameless toughened old glass panes in door shutters and similer locations in repair work in any size in any description and in any position including removing, resetting and refixing in same location to match with existing work etc. all complete as per direction of Engineer-in-charge

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Water supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes external work

Making connection of G.I/UPVC. distribution branch with G.I./CPVC main and similar locationsof following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Providing and fixing 25mm dia gun metal/UPVC gate valve of approved quality

Aluminium work

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float/frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge.With stainless steel cover plate minimum 1.25 mm thickness.

Page 4 of 4

Providing and fixing 12 mm thick frameless toughened glass in partition work in patches /door shutter and similer locations of required size, approved brand and manufacture, including removing of shattred glass in patches and fix the new glass to match with existing etc. for fixing new glass, all complete as per direction of Engineer-in-charge (weather sealent will be paid separately).

Filling the gap in between partition glass by providing weather sealent/silicon gel of approved quality as per manufacturer all comlpete as per direction of Engineer-in-charge.

Sub-total, Rs.

GST @ 18%, Rs.

(A) ------------------------------------------------------------------------------------Amount put to Tender, including GST, Rs

(B) ------------ Contractor's Overhead & Profit in Percentage of (A): [below (-) / above (+)]

C = (A+B) ---------------------------------------------------------------------------------------------------------- Total Amount, Rs.

(D) ---------------------------------------------------------------------------------------------- Further Discount / Rebate, if any

Gross Amount including GST, Rs.

In Words:

Note to the Bidder: 1). In the colored cell (B), above: The Bidder may enter their %age of Profit with + or - sign (Example, -1 or 2 or -3 etc.) 2). In the colored cell (D), above: The Bidder may enter their amount in numericals. (Example, 20000 or 25000 etc.)

Name of the Company:

Name of the Proprietor / Authorized Person with Contact No.:

TECHNICAL BID PREQUALIFICATION CRITERIA: Comply as per the Tender Notice

Name of the Work

II. DESIRABLE CRITERIA: Upload the documents, if any

a. Constitution & Legal Status Certificate details. b. Details of License for executing this kind/nature or specialized type of works from the concerned authorities/organizations etc. c. Memorandum of undertaking for all the firms except proprietary firms.

Name of the Bank

Nature of Account (Current/savings):

Bank Address:

Bank code:

IFSC Code:

MICR No:

Name of the Company:

ISSUING OFFICER