Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹17,188
Closing Date
22 Dec 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-1
Providing Additional 02 Nos of 11kV, MEI Make, 350MVA, 20KA, Out Door type 800A feeder panel and Annunciator panel (2F,1AP for feeder) Scada compatible PCVCB required at 66/11kv Bukkapatna S/S coming under Sira Nodal, Madhugiri Operation Division. Including Supply Of Equipments/Materials, Erection (Including Civil Works), Under Partial Turnkey Basis
KPTCL/2025-26/EL/WORK_INDENT2923/CALL-2
KPTCL/2025-26/EL/WORK_INDENT2923/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Tumkur
4 documents required · 3 mandatory · 1 optional
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
Certificate for having executed similar nature of works successfully/satisfactorily issued by an officer not below the rank of an Executive Engineer(Ele)., of an Electrical Utility be uploaded
Valid Certificate of the Registered Company/Firm issued by labour department (Form-C)
No deviation certificate.
The Tenderer should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submission and shall upload the same along with other bidding documents failing which the offer will be rejected
GST Registration Certificate
PAN Registration Certificate
Self-Declaration for not black listed by any Govt. organization/Board/Company/any other sector
ESI Registration Certificate
EPF Registration Certificate
An undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender & Procurement - application for Vendor registration etc
Self-declaration for Risk & Cost
Self-declaration for Litigation or arbitration with respect to KPTCL contractors over the last two years.
Technical Schedule-I,II & III
Proforma of under taking
Average Annual Turnover (AAT) of the bidder for best two years out of preceding five financial years (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25) ending on March or December as the case may be, shall not be less than Rs.17.19 Lakhs
Bidder shall be financially sound and shall submit Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder.
Audited financial Turnover statement for preceding Five years
₹500
₹17,188
3 Dec 2025
3 Dec 2025
23 Dec 2025
16 Dec 2025
Providing Additional 02 Nos of 11kV, MEI Make, 350MVA, 20KA, Out Door type 800A feeder panel and Annunciator panel (2F,1AP for feeder) Scada compatible PCVCB required at 66/11kv Bukkapatna S/S coming under Sira Nodal, Madhugiri Operation Division. Including Supply Of Equipments/Materials, Erection (Including Civil Works), Under Partial Turnkey Basis
Erection, alignment and fixing to the foundation, outdoor switchgear unit including movement from the point of unloading to the point of erection. ---- AS PER TERMS
Errection of 11kV Annunciator Panel with 110V DC Control for single feeder including movement from the point of unloading to the point of erection ---- AS PER TERMS
Wiring: Identification of wires, Ferruling Crimping and Termination of wires for annunciation, etc.Testing of Relays, CTs PTs and Breaker for operation ---- AS PER TERMS
For each additional 11kV paneloutdoor type kiosk ---- AS PER TERMS
19CX 2.5Sqmm ---- AS PER TERMS
Laying 19CX 2.5Sq mm. ---- AS PER TERMS
4CX 6.0Sqmm ---- AS PER TERMS
Laying 4CX6.0 Sqmm ---- AS PER TERMS
4CX4 Sqmm. ---- AS PER TERMS
Laying 4CX4Sqmm ---- AS PER TERMS
RCC Pole 9 Mtr Long 145 Kg WL Sq Section (Dwg No.BESCOM/GM/QSandS/51 Dtd 24.11.2018 as per IS-785) for ODS ---- AS PER TERMS
DP Set(2Pole Strucrure Kit) as per IS-197 For RCC Pole 9 Mtr Long, 145KG WL PSCC Pole 9 Mtr Long, 300Kg WL ---- AS PER TERMS
1B2 4.0 Mtrs long 0.036MT for 1 No page no 246 item A (12/0.432 MT) ---- AS PER TERMS
11 kV, 400 Amps Double Break GOS(Dwg No. BESCOM/GM/QSandS/22 Dtd 24.11.2018) ESCOMs. ---- AS PER TERMS
11 kV, 400 Amps Special Roaster GOS ESCOMs. ---- AS PER TERMS
H Frame Set for fixing 11 kV, 200 Amps Single Break GOS (For DP structure for providing New GOS for sectionalisation) GI ---- AS PER TERMS
Braided earth bond 450mm long. ---- AS PER TERMS
Loading of RCC poles, structural materials, GOS, nut and bolts, beams, conductors, insulators, clamps, cables etc. ---- AS PER TERMS
Main bus/Cross bar formation using single Drake ACSR Conductors (Bay) ---- AS PER TERMS
Main bus/Cross bar formation using single Coyote ACSR Conductors (Bay) ---- AS PER TERMS
Coyote ACSR with acessories ---- AS PER TERMS
Rabbit ACSR ---- AS PER TERMS
90kN Disc insulator along with hardware materials ---- AS PER TERMS
Single Tension Clamps for Coyote ACSR bolt and nut type ---- AS PER TERMS
C-type Wedge connectors for Coyote to Coyote ACSR conductor ---- AS PER TERMS
Pad clamp for Coyote ACSR ---- AS PER TERMS
Pad clamp for Rabbit ACSR ---- AS PER TERMS
RCC pole clamps-GI ESCOMs ---- AS PER TERMS
GI fish plate ESCOMs ---- AS PER TERMS
G.I Bolt of various dia and length to complete the work with flat washers, spring washers and nuts as per the directions of site engineer ---- AS PER TERMS
Eye Hook (Flat Type) for fixing Clamp. ---- AS PER TERMS
Danger plates/Caution plates ESCOMs ---- AS PER TERMS
Erection of RCC Pole 9 Mtr Long 145 Kg WL Sq Section (Dwg No.BESCOM/GM/QSandS/51 Dtd 24.11.2018 as per IS-785) for ODS ---- AS PER TERMS
Erection of DP Set(2Pole Strucrure Kit) as per IS-197 For RCC Pole 9 Mtr Long, 145KG WL PSCC Pole 9 Mtr Long, 300Kg WL ---- AS PER TERMS
Erection of 1B2 4.0 Mtrs long 0.036MT for 1 No page no 246 item A (12/0.432 MT) ---- AS PER TERMS
Erection of 11 kV, 400 Amps Double Break GOS(Dwg No. BESCOM/GM/QSandS/22 Dtd 24.11.2018) ESCOMs. ---- AS PER TERMS
Erection of H Frame Set for fixing 11 kV, 200 Amps Single Break GOS (For DP structure for providing New GOS for sectionalisation) GI ---- AS PER TERMS
Unoading of RCC poles, structural materials, GOS, nut and bolts, beams, conductors, insulators, clamps, cables etc. ---- AS PER TERMS
10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ---- AS PER TERMS
10 kV, 5kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ---- AS PER TERMS
Multi Function Transducer (MFT) ---- AS PER TERMS
Optocoupler 8 channel 220/110V ---- AS PER TERMS
Current Cables-copper core with 4.0sqmm cross section multistrand 7 core for CT termination ---- AS PER TERMS
Laying of Current Cables-copper core with 4.0 sqmm cross section multistrand 7 core for CT termination ---- AS PER TERMS
Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination ---- AS PER TERMS
Laying of Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination ---- AS PER TERMS
Signal/communication cables Armoured copper core with 0.5 sqmm cross section multistrand 10 core ---- AS PER TERMS
Laying Signal/communication cables Armoured copper core with 0.5 sqmm cross section multistrand 10 core ---- AS PER TERMS
Control cables-copper core with 1.5 sqmm cross section multistrand 10 core ---- AS PER TERMS
Laying Control cables-copper core with 1.5 sqmm cross section multistrand10core ---- AS PER TERMS
Grounding of equipments by providing cast iron pipes of 100 mm ID ,13mm thickness,2.75 mts long with 2 part clamps out of GI flate 50X6 mm continuously welded around the pipe using cast iron welding e...
Grounding of equipment with 50X6 mm G.I flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecti...
supplying and providing 450 mm dia, 450 mm height,1.5 to 2 thick hume pipe coller (non pressure type) for each earth pits including all lead and lifts etc ---- AS PER TERMS
Earth work exacavation to run the GI flat to connect between equipments to earth ground pit in normal soil ---- AS PER TERMS
Refilling available earth around trenchesafter connectingthe equipment to earthmat/ground pit ---- AS PER TERMS
Providing new name plates with metal stick including printing of letters, painting and welding of stick and board to DPs and earthing pits (2feet X 1feet) as per the directions of field engineer (Mark...
Supply and fixing of earthing name plates (Market Rate) ---- AS PER TERMS
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering and leveling the ground for all works other than foundation & depth in all kinds of soil not exc...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. In depth, compacting each deposited layer by ramming after watering with lead upt...
Providing jelly (Vol-1, P.No.A-38/II.2) BR= 1333.00/Cum ---- AS PER TERMS
Labour Engaed for Removing and Re spreading of jelly (Vol-1, P.No.A-49/III) BR= 499.43.00/man Day's ---- AS PER TERMS
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
4.letter of under taking of firm.doc
Others - Letter of under taking of firm.doc • 0.03 MB
5.No deviation certificate.doc
Others - No deviation certificate.doc • 0.03 MB
2.Tender Doc - ITB, GCC, IFC Etc Bukkapatna.doc
Tender Document • 0.17 MB
1.NIT-Bukkapatna.doc
Instructions to Tenderers • 0.12 MB
3.Techno commercial bid schedule (i-iii)-Doddaguni.xlsx
Techno-Commercial Worksheet • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .