WELCOME MAINTENANCE AND PERIODICAL SERVICES TO OFFRS OTM/MD ACCNS INCLUDING REPAIR/RENEWAL OF SEWAGE LINES, MAN HOLES, SEPTIC TANKS, FILTER BED AND REPAIR TO DRAIN, BOUNDARY WALL, FENCING, PLINTH PROTECTION,HARD STANDING, PATHWAYS, ETC OF OTM/MD ACCN

Amount

M & L for preparation of old surfaces plastered or unplastered walls including cornices and applying one coat of white wash complete all as specified and directed

M & L for preparation of old srfaces plastered or unplastered surfaces of walls including cornices and applying one coat of acrylic emulsion distemper including filling cracks/ undulated surfaces with wall care putty wherever required complete all as specified and directed

M & L for preparation of old plastered or unplastered surfaces on walls/ceiling including cornices and applying one coat of cement based paint complete all as specified and directed

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old plastered or unplastered surfaces on walls including cornices and applying one coat of exterior emulsion paint (weather coat paint) complete all as specified and directed

M&L for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets/soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in roof padding etc and removing of debris from outside MD land complete all as specified and as directed.

M&L for 10 mm thick Plaster on RCC roof slab and sunken portion with CM ( 1:3 ) including water proofing compound @ 3% by weight of cement or as per manufacturer's instruction shall be carried out complete all as specified and directed (Note : WPC shall be measured and paid separately under relevant item)

M&L for PCC (1:2:4) type B-0,(using 12.5 mm graded crushed stone aggregate) as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement or as per manufacturer's instruction complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for preparation of plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown and one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and directed

M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.

Supply only water proofing compound.complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated and Transulent sheet etc) sheets in roof covering incl ridges complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Grade Fe 410 -W (Gde E- 250) quality A. complete all as specified and directed

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying Two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. complete all as specified and directed

S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 1991 including cutting, drilling jointing ect complrtr including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good. complete all as specified and directed

Excavation in trenches by mechanical means (Hydraulic excavator) n.exc. 1.5m wide and n.exc. 1.5m in depth for taking up/laying sewer lines and getting out in any kind of soil all as specified and directed.

All as per item No.22 above but exc. 1.5m and n.exc. 3.0m deep. complete all as specified and directed

Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed

Removing of excavated soil to a distance n.exc 50m and depositing where directed at alevel n.exc 1.5m above starting point. complete all as specified and directed

Demolition and breaking up drain pipes 100mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and directed

All as per item No.26 above but 150mm dia. complete all as specified and directed

All as per item No. 26 above but 200mm dia. complete all as specified and directed

M&L for Salt Glazed Stoneware pipes grade 'A',100mm bore,laid in trenches and jointed complete all as specified and directed

All as per item No. 29 herein before but 150mm bore. complete all as specified and directed

All as per item No. 29 herein before but 200mm bore. complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) for bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

All as per item No. 32 herein before but bed to150mm bore. complete all as specified and directed

All as per item No. 32 here-in before but bed to 200mm bore. complete all as specified and directed

Demolition of RCC cover slab for manholes etc. complete all as specified and directed

M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone crushed aggregate as in cover slab for manholes etc.and set in cm 1:6. complete all as specified and directed

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed

Demolition of Bricks or stone masonry built in cement mortar complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (20mm graded stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and directed

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debrie. complete all as specified and directed

M & L for rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain by using water proofing compound etc complete all as specified and directed

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) . complete all as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone crushed aggregate) as in foundation filling and mass concrete complete all as specified & directed

M&L for Plain cement concrete type C1(1:3:6)( using 20mm graded crushed stone aggregate) as in surface chanels and drains complete all as specified and directed

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded crushed stone aggregate ) as in benching coping etc incl necessary form work.complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 75mm thick plain cement concrete in (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

S&F for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed of cement mortor (1:6) in floors. complete all as specified and directed

M&L for Cutting into existing manholes for 100mm dia connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. complete all as specified and directed

M&L for Cutting into existing manholes for 150mm dia connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching complete all as specified and directed

M&L for Cutting into existing manholes for 200mm dia connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and directed

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed

All as per item No 57 here-in-above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed

All as per item No 60 here-in-above, but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and directed

M&L for 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and directed (Note : Colour of granite shall be as approved by G.E)

M&L 40 mm thick polished cudappah stone slab in vertical and horizontal support for cooking platform, shelves and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

M & L for rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, mixed with WPC @3% of weight of cement used or as per manufacturer's instruction finished even and smooth w/o using extra cement complete, all as directed and specified including taking down of old plaster. complete all as specified and directed NOTE: WPC will be measured and paid separately under relevant item

Cleaning the surfaces thoroughly from dust, dirt & projections and applying a coat of hot blown bitumen bitumen 85/25 @ 1.2Kg/SQM over a coat bituminous primer @ 0.3 lit per sqm in sunken floor complete, all as directed and as specified.

M & L for PCC (1:5:10) type E2 (using 40 mm graded crushed stone aggregate) as Sunken in filling and mass concrete complete, all as directed and as specified.

Taking down shutters n.exc 1 sqm each complete all as specified and directed

Taking down shutters exc 1 sqm but n.exc 2 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and directed

Taking down shutters exc 1 sqm but n.exc 2 sqm each and re-fixing in same opening after reapirs and resize complete all as specified and directed

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

S & F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded Complete all as specified and as directed.

M & L for cement concrete (1:3:6) type C-1 using 20mm graded aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork. complete all as specified and directed

S&F II nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints. complete all as specified and directed

S&F 40mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated. complete all as specified and directed

S&F of factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats. complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and directed

S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F powder coated Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition Sliding and openable type frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

S&F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames, window grills, guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165. complete all as specified and directed

M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and directed

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish colour and pattern as approved and fixed over plywood with approved adhesive complete all as specified and directed

S&F in Continuous (piano) mild steel width of flap 30mm bright finish or electro galvanised. complete all as specified and directed

S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets and fancy type knob, stops, rollers etc complete all as specified and as directed .

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane. complete all as specified and directed

S & F for 4.0 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L for precast cement concrete solid building blocks or slabs Type C1 1:3:6 (using 20 mm graded stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4), complete all as specified and directed

M & L in repair for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall and floors etc complete fixed all as specified and as directed.

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified and directed

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and directed

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts. complete all as specified and directed

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia. complete all as specified and directed

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup. complete all as specified and directed (Make : Prayag Cart Part No PIS-12 H)

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup. complete all as specified and directed (Make :Prayag or equivalent)

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type). complete all as specified and directed

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and directed

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with inlet ball valve float flush pipe and handle including brackets complete all as specified and directed

S&Fin repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed

S&F in repair of Chromium plated tubular towel rail 20mm dia 600mm long fixed with suitable steel screw etc complete all as specified and directed

S&F in repair chromium plated gratings 100mm dia with provison of with or without hole , fixed with suitable solvent cement etc completed. complete all as specified and directed

S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile, complete all as specified and directed

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). complete all as specified and directed

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and directed

S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F for 75 mm dia PVC (SWR) grade bends of any radius. complete all as specified and directed

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius. complete all as specified and directed

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia. complete all as specified and directed

S&F PVC (SWR) vent cowl, 75mm dia. complete all as specified and directed

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and directed

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store. complete all as specified and directed

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store. complete all as specified and directed

S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed

S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed

S&F in repairs for providing 20mm dia CPVC gate valves screwed both ends for iron pipes. complete all as specified and directed

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

S&F rotational moulded Polyethylene [HDPE] water tanks, Triple layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed

S&F rotational moulded Polyethylene [HDPE] water tanks, Triple layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed

Cleaning of RCC/PVC water tanks with bleaching powder removing all scale and dirt etc from tank and from tanks and from mouths of circulating pipes, etc including writing with paint out side tanks "tanks cleaned on with month and year capacity of tanks exc 250 & n. exc 500 ltrs and recconecting air lock complete all as specified and as directed.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed

M&L for 50mm thick PCC (1:3:6) type C-1 (20 mm graded aggregate) as in plinth protection finished even and smooth with using extra cement including forming 6mm wide joints at n,exc 2.0 sqm area and filling with mastic comprising one part of heated bitumen 85/25 grade and three parts of sand complete all as specified and directed

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) even and smooth without using extra cement complete all as specified and directed

M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of cement base paint complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash complete all as specified and as directed .

NARAYANA CONSTRUCTIONS (BID ID -3504695)

GUTHIKONDA BROTHERS (BID ID -3504124)