NITNo7ItemNo6

Arrangement of safety equipments for the protection of staff to make the working area free from all toxic gases and free from accident during working at site as per NHRC guidelines

Plugging of total sewage water entering into the chamber by closing of incoming and outgoing gate by necessary arrangement with gunny bags as per site requirement.

Removal of slit, washing and cleaning of complete grit chamber and taking out of floating material from the grit chamber by suction machine/pump and labour.

Dismantling of gear box, motor, chain sprocket and other related parts of turn table after cutting of all rusted nuts bolts and taking out at the ground with the help of manual labour.

Dismantling of turn table after cutting of all rusted nut bolts of base and disconnection from lower side from the coupler shaft by cutting of rusted nut bolts by gas cutter and taking out by manual labour and handling equipment as per site requirement.

Repairing/Strengthening of arms of both the side by providing and fixing of MS angle/MS flat /MS channel as per existing including cutting/ Fixing / welding/ Grinding of edges etc. as per site requirement.

Providing and fixing of new MS tie bolts for adjustment of arm. The bolts of size 20X200 mm full threaded with nut & washer. Including the job cutting/dismantling of old rusted tie bolts from the arm by gas cutter

Providing and fixing of new MS scrappers made out of MS angel and MS sheet of 6 mm with rubber squeezer of 100 % synthetic rubber. Fixing with nuts & bolts drilling, hole as per sample. The job includes dismantling of old damaged MS Scrapper from the arm by cutter and removing from grit chamber by manual labour.

Repariing of overhauling turn table by reparing of its damaged parts. Machining of turn table with heavy duty machine. Making of ball seat for fixing of ball.

Replacement of S.S balls of turn table as per sample.

Casting/Machining of GM bushes for turn table.

Replacement of chain sprocket of turn table.

Replacement of chain of turn table.

Providing of nut bolts with washers.

Repairing / Renovation of gear box of turn table repairing of worm shaft, worm gear by rematling & making the proper size bush & bearing etc replacement of gasket.

Repairing/ Renovation of motors of turn table by repairing of rooter shaft rematling & making the proper size as per bush & bearing. Making zero balance of rooter shaft by balancing, machine and replacement of bearing as per sample & varnishing etc.

Paintings of the complete unit with one coat of red oxide and second coat of black paint.

Testing & commissioning of unit in all respects for proper functioning.

M/s S.G. Enterprises

defence engineers (india)

paramount systems

AQUA GASEOUS CONTROLS (INDIA)