Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.1 LAccepted-AOC SHIV NIWAS DHANDA P O TOTU DISTT SHIMLA HP 171011 | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171011 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹8.6 L+₹29,856.50 (3.60%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | 3₹9.7 L+₹1.5 L (17.6%)Rejected-Finance VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | 3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | 4₹9.8 L+₹1.5 L (17.8%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | 5₹9.9 L+₹1.6 L (19.7%)Rejected-Finance CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | 5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
25 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AJAY KUMAR SINGH
LAKE VIEW CAMP MILITARY STATION TALBEHAT, PIN-284125
REPAIR/MAINT TO JOINERY WORK IN ZONE 14 AND 12 AT MIL STN TALBEHAT
2023_MES_628758_1
AGE(I)/TBT/TOK-66/2023-24
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT MIL STN
7 documents required · 7 mandatory
₹500
Yes
AGE I TALBEHAT
₹19,980
15 Feb 2024
18 Nov 2023
27 Dec 2023
25 Nov 2023
25 Dec 2023
2 Dec 2023
Amount
Taking down chowkats or frames exc. 1.5 but n.exc 4sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and as directed
-Ditto- but n.exc 1.5m2 each -ditto-.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.
Taking down shutters of any description n.exc 1 sqm and -ditto-
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing completeall as specified and directed.
S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.
S&F IInd class hard wood (solid) plain.solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and as directed
S & F pressed steel frame size 105x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S & F pressed steel frame size 165x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. complete all as specified and as directed
M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block ,Filling of holes, coping & filling to PS Frame etc complete all as specified and as directed
S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed
S&F II nd class HW, 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately). (Note : Design of shutter approved by Engr-in-charge)
S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-charge
S&F Powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified.
S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified
S&F Powder Coated anodized aluminium window shutters openable type ,without sash bars, aluminium sections weight not less than 0.55 Kg/RM necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle (2 no.) complete all as specified and directed by Engineer-in-Charge. Note:- Glass and Wiremesh paid Seprately.
M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat,glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed by Engr-in-charge.(Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Seprately.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge
M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,ladders; framed baluster,railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand frame confirming to Fe-290 or Fe-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen exc 0.5 sqm in each pane all as specified and as directed.
M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed.
M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed.
Taking out old unserviceable steel wire cloth & S & F Stailess steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S & F sheet plain glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden beadand pin tacked complete all as specified and directed.
S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door.
S&F in mild steel helical door spring 150mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge.
S&F aluminum alloy anodised butt hinges, ISI marked of size 100 mm, complete all as specified and directed.
S&F Stainless steel butt hinges, ISI marked of size 100 mm, complete all as specified and directed.
S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed
S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed
S & F in repairs aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S & F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.
S & F 250mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Repair to Aluminum window / door including necessary welding, reivting, locking, beading,easing drilling taking down replacement of unserviceable hanging devices making them in serviceable condition and refixing in same opening complete all as specified and directed.
Repair to wooden window,Door including necessary reivting, easing drilling and replacement of unserviceable hanging device, and makiing them in serviceable condition complete all as specified and directed.
Repair to steel window including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device, and makiing them in serviceable condition complete all as specified and directed.
M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enamelled paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed.
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed
M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.
M&L for preparing of surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil bound distemper in any colour complete all as specified and directed.
Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed
S&F in repair Stainless steel 20mm dia curtain rod including fixing brackets complete all as specified and directed.
S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete al as spd & directed.
S&F 0.9m to 1.5m bottom door seal brown aluminium frame 38 to 45mm width all as specified and directed.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
M/S SANTOSH KUMAR JAIN
M/S A.R BUILDERS
M/s Indu Enterprises
HARNAM SINGH ANIL SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .