INTEGRATED COMPREHENSIVE MAINTENANCE WORK OF BR EM IN MARRIED ACCOMMODATION QUARTERS OF AF PERSONNEL AT VAYUSENA NAGAR NAGPUR

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any discription not exc 1 Sqm each complete all as specified and directed.

Supply & fix IInd class HW plain solid straight chowkhat and frame framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet re-inforced with mild steel square tube with single side prelam PVCsheet used instead of plain colour PVC sheet and edge will be painted to match with prelam sheet and fixed in position as per manufacturer's instructions of best quality complete all as specified and directed.

Supply & fix Factory made solid PVC moulded door shutter 30 mm thick (Stiles) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification & drawing of best quality complete all as specified and directed.

Supply & fix factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, of best quality complete all as specified and directed. Note: stainless steel butt hinges and necessary SS screws shall be paid separately

Supply & fix Factory made solid panel PVC door wired gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panneling of stainless steel wire cloth i.e. panel will be of wire gauze in lieu of PVC sheet panel . The wire gauze shall be wrapped on an additional square 8 mm M.S. Solid tube and this tube shall be wellded to MS tubes The wire gauze shall be stretched to tighten firmly of best quality complete all as specified and directed.

Supply & fix steel windows with side hung shutters including projecting type hinges with steel handle steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

Supply & fix steel ventilators with centre hung shutters including two pairs of brass cup pivots catch spring and pulling wheel complete all as specified and directed.

Supply & fix Powder coated aluminium (minimum thickness of powder coating 50 micron) section for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all of best quality complete as per architectural drawings and as directed.

Supply & fix 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepare to received glass, gauze etc divided into square with plain, chamfered or rounded mitred and rebated sash bars any numbers edge of framing plain, chamfered of best quality complete all as specified and directed.

Supply & fix 30 mm thick second class hard wood plain framed panelled shutters (any number of panel), with panels of veneered particle board or ply wood or bison board of best quality complete all as specified and directed.

Supply & fix 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides make as approved by GE of best quality complete all as specified and directed.

Supply & fixed in repair 12 mm thick plywood grade BWR type BB fixed with screws to timber frame work in partitions of best quality complete all as specified and directed.

Supply & fix Block board 18/19 mm thick, grade 1 quality, exterior grade, comercial type with one side decorative face of best quality complete all as specified and directed.

Supply & fix mild steel flat iron as in hold fast including bolts conforming to Fe-290 Gde-E-165 of best quality complete all as specified and directed.

Material & labour for plain cement concrete 1:3:6 type C1 using 20 mm graded aggregate for fixing hold fast and making good to disturubed surface complete all as specified and directed.

Hacking out old brocken glass of any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead complete all as specified and directed.

Hacking out old brocken glass of any thickness, size, quality or description from metal frame including punching out or drilling out glazing pins / spring clips complete all as specified and directed.

Supply & fix sheet glass 3 mm thick, ordinary quality with oil putty not exc 0.5 sqm in each pane complete all as specified and directed.

Supply & fix sheet glass 3 mm thick, pin head type with oil putty not exc 0.5 sqm in each pane complete all as specified and directed.

Supply & fix sheet glass 4.8 mm thick, ordinary quality with oil putty exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire or staples complete all as specified and directed.

Supply & fixed in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire or staples complete all as specified and directed.

Supply & fix butt hinge 100 mm long, medium weight cold rolled mild steel complete all as specified and directed.

Supply & fix butt hinge 75 mm long, medium weight cold rolled mild steel complete all as specified and directed.

Supply & fixed in repairs continuos (Piano) hinge MS bright finished or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.

Supply & fix aluminium anodised sliding door bolt with hasp staples (Bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 300 mm long and fixed of best quality complete all as specified and directed.

Supply & fix Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm of best quality complete all as specified and directed.

Supply & fix aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed of best quality complete all as specified and directed.

Supply & fix aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed of best quality complete all as specified and directed.

Supply & fix extruded aluminium alloy handle fabricated type anodised 150 mm long of best quality complete all as specified and directed.

Supply & fix extruded aluminium alloy handle fabricated type anodised 100 mm long of best quality complete all as specified and directed.

Supply & fix Hasp and staple 125mm long, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws of best quality complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Material & Labour for preparing new surface of wood of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for preparing new surface of steel of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparing old surface of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for preparing old surface of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply & fixed in repairs 300 mm long mild steel ordinary rat rail spring including roller and roller plate complete complete all as specified and directed.

Supply & fixed in repairs Harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Supply & fix mild steel handle to existing steel windows left or right (as per existing pattern) complete all as specified and directed.

Supply & fix mild steel peg stay for windows/ventilators complete all as specified and directed.

Material & labour for welding in repairs n.exc 2.5 cm in length and n exc 6 mm thick complete all as specified and directed.

Material & labour for welding in repairs to broken hinges of door and windows to metal frame complete all as specified and directed.

Supply & fixed in repairs aluminium anodized tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

Supply & fix Powder coated aluminium (minimum thickness of powder coating 50 micron) section for shutters of doors, windows, ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings where ever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete as per architectural drawings of best quality and as directed.

Supply & fix 5mm PVC rubber sheet for doors exc 0.05 and n exc 0.1 metre width of best quality complete all as specified and directed.

Supply & fixed in repair stainless steel wall mounted rack of size 630 x700 x220 mm and thickness of sheet not less than 0.05mm with provision for keeping plates and other crockery fixed with screw and rawal plug etc on wall of best quality complete all as specified and directed.

Material & labour for granite (or any type) tiles 20mm thick maching cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of best quality complete all as specified and directed.

Dismantling asbestos cement, galvalume, fiber (Plain, corrugated , semi-corrugated, etc.) sheet in roof covering all as specified and directed.

Supply & fix Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Supply & fix Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (other than ground floor) including floor finishes and disposal of debirs all as specied and directed.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces on wall/ceilling etc including racking out joint, hacking for key,scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc., complete all as specified and directed.

Material & labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material & labour for PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate), 50 mm thick minimum as in sunken flooring finished even & fair mixed with WPC as per manufacturer's instraction or @ 3% by weight of cement with proper slope towards spout complete all as specified and directed. Note : WPC will be measured and paid separately

Material & labour for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth without using extraa cement with using water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

Material & labour for applying two coats of Cement base paint over a coat of primer on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

Material & labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces of best quality complete all as specified and directed.

Material & labour for PCC 1:5:10 type E2 using 40 mm graded stone aggregate as in filling of sunken portion complete all as specified and directed.

Material & labour for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and directed.

Material & labour for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth complete all as specified and directed.

Material & labour for applying two coats of OBD over a coat of primer on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

Material & labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Supply only integral water proofing compound.

Material & labour for coloured Non Skid ceramic tiles joint free 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile of best quality complete all as specified and directed.

Material & labour for glazed coloured ceramic tiles joint free 350x 250x 7mm/ 450X 350X 7mm thick laid on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile of best quality complete all as specified and directed.

Material & labour for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of best quality all as specified and directed.

Material & labour for rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing coat for laying of wall tiles all as specified and directed.

Material & labour for Screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

Supply & fixed in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm, errecting on existing CI brackets of best quality complete all as specified and directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor without extra cost.

Supply & fixed in repairs vitreous china squatting pan of orrisa pattern, size 580X 440 mm white, with integral foot rest 'P' or 'S' trap, of best quality complete all as specified and directed.

Supply & fixed in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of best quality complete all as specified and directed

Supply & fixed in repairs Vitreous china wash down water closet (EWC) (Pedestal type), white including seat cover with brass screws and excluding flush pipe and flushing cystern of best quality complete all as specified and directed.

Supply & fixed in repairs PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & fixed in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply & fixed in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm dia and fixed complete all as specified and directed.

Supply & fixed in repairs Soap dish, vitreous China white of size 160 x 160 x 90 mm. complete all as specified and directed.

Supply & fixed in repairs brass chromium plated hand shower (Health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) complete all as specified and directed.

Supply & fixed in repairs 32mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete in wall ,floor etc all as specified and directed.

Supply & fixed in repairs 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, ;fixed to wall complete all as specified and directed.

Supply & fixed in repairs 100 mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches,complete all as specified and directed.

Supply & fixed in repairs 100 mm bore CI bend, diminishing pieces or tapers complete all as specified and directed.

Supply & fixed in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing complete all as specified and directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Supply & fix GI tubes,15mm dia 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply & fix GI tubes, 20mm dia 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting existing tanks,exc 500 but n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position complete all as specified and directed.

Dismantling existing PVC water tanks of capacity exc 500 litres but n.exc 1000 litres capacity complete all as specified and directed.

Supply & fix 500 litres capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and directed.

Supply & fixed in repairs Ball brass valve 20 mm size high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair pillar taps, 15mm cast copper alloy, with Snow neck, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of best quality complete all as specified and as directed.

Supply & fixed in repairs stop valves,15mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of best quality complete all as specified and directed.

Supply & fixed in repairs bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, of best quality all as specified and directed

Supply & fixed in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, of best quality complete all as specified and directed.

Supply & fixed in repairs bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), of best quality complete all as specified and directed.

Supply & fixed in repairs pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms), of best quality complete all as specified and directed.

Supply & fixed in repairs Stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), of best quality complete all as specified and directed.

Supply & fixed in repairs Nipple 20mm dia suitable for HDPE water tank (Minimum weight 20mm- 45gms), of best quality complete all as specified and directed.

Supply & fixed in repairs waste coupling of PTMT 40mm (half or full threaded) suitable for kitchen sink (Minimum weight 40mm-60 gms), of best quality complete all as specified and directed.

Supply & fixed in repairs grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms), of best quality complete all as specified and directed.

Supply & fixed in repairs swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms), complete all as specified and directed.

Supply & fixed in repairs shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms), complete all as specified and directed.

Supply & fixed in repairs PVC connections 15mm size with PTMT nuts of length 450mm, of best quality complete all as specified and directed.

Supply & fixed in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & fixed in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply & fixed in repairs 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed.

Supply & fixed in repairs 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & fixed in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply & fixed in repairs PVC (SWR) floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.

Supply & fixed in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply & fixed in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantiling of existing kitchen platform (Including cooking platform, pedestals & boarding with frame complete all as specified and directed.

Material & labour for machine cut cudappah stone slab 20-25mm thick laid over and including cement screed base 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material & labour for rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Material & labour for granite (of any type) 20mm thick work ( table rubbed and polish to mirror finsh) in a steps, jambs, pillers, window sills, cooking platform and like in cement motor (1:4) including pointiong in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

Supply and fix syphon kit for low level flushing cistern complete all as specified and directed.

Grubbing up tree trunk including cutting of trunk protruding over brick wall, chajja, roof digging out roots filling hole with concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) girth of tree n exc 30cm and removing of unserviceable material to a distance n exc 50m complete all as specified and directed.

Material & labour for repairs to ends of chajja (450mm to 500mm width) by removing the old loose concrete material, cleaning the reinforcement and finishing the surface apply epoxy base resin manufactured by pidicrete and choksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site etc complete all as specified and directed.

Material & labour for complete removal of existing surface finish with wire brush and washing complete as per manufacturer instructions and applying Two coats of acrylic Smooth exterior paint of approved shade (1.67 ltr/10 sqm) over a coat of exterior primer (2.20 kg/10 sqm) all as specified and directed.

Material & labour for applying 1mm thick wall care putty on wall surface all as specified and directed

Supply and fixed in repairs 9 feet pully operated cloth drying system make as approved by GE, aluminium anodised 20mm dia pipes,channels assembly, locking system to hide rope knot, rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed.

Material & labour for preparation of wall surfaces and applying two coats of 100% Premium exterior acrylic emulsion paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer @ 0.90 litre/ 10 sqm complete all as specified and directed. Notes : (i) Contractor to be carried out through authorised applicator of Berger/Asian paint etc with manufacturer warranty (ii) primer and emulsion to be carred out through Mechanical means air less spray machine.

Material & labour for repair to cracks including cutting V groove along cracks removing all dust and loose particles using a blower wetting the crack using water and filling the crack using crack seal compound paste as per manufacturer's instructions and finishing using putty blade incuding necessary scaffolding complete all as specified and directed. Make : Fosroc renderoc CS/ Sika cracksil/ Pidilite Dr fixit 217 Crack x Shrinkfree.

Material & labour for preparing old distempered and painted surfaces of walls by washing, rubbing down and stopping etc and applying a coat of distemper oil emulsion complete all as specified and directed.

Material & labour for preparing old painted surfaces of walls by washing, rubbing down and stopping etc and applying a coat of cement base paint complete all as specified and directed.

Material & labour for preparation of surfaces of floor and applying one coat of floor guard of approved shade to paver tile, blocks, kerb stone etc complete all as specified and directed.

Material & labour for scraping and prepration of old decorated wall surface including all necessary scaffolding as required and applying two coat of exterior emulsion paint colour by the authorises applicator Berger/Asian paint etc omplete all as specified and directed in Bldg No 77, 78,79, 80, 101,110,111,112, 113, 114,115,116 & as per requirement complete all as specified and directed.

Material & labour for dampness rectification on external wall surface as the following:- surface preparation : removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level. Coating: Applying two coats of Dr fixit pidifin 2k/ berger or techno-commercial equivalent make approved by GE (Two component i.e., anti-fungal and acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hrs Finishing the surface: Applying plaster over the treated surface with water proofing compound and applying one coat of putty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating (Berger HS W/C roof guard or techno-commercial equivalent make approved by GE) with synthetic fibre @ 20% dilution over base coat and two coats of premium polyurethene based acrylic emulsion (Berger platina weather coat long life or techno-commercial equivalent make approved by GE) as finishing coat approved shade after proper curing as per manufacturer's instructions and as directed. Note: Quoted unit rate is inclusive of scaffolding in any height.

Material & labour for filling of silicon gel with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jambs and similar joints in other places complete all as specified and directed.

Material & labour for preparing old painted surface of stone work of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material & labour for preparing old decorated surface including filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls all as specified and as directed.

Material & labour for preparing old decorated surface including filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on ceilings all as specified and as directed.

Taking down carefully sub-main wiring of any description and making good to the disturbed surfaces to match the existing all as specified and as directed.

Material & labour for sub main wiring complete with two single core 6 Sqmm ZHLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit Medium grade and conduit accessories including 6 Sqmm ZHLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 runs of 6 sqmm & one run of PVC conduit and conduit accessories shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material & labour for point wiring (concealed) in walls and surface on ceiling complete with ZHLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, inner and outer modular cover plate of make same as switches/sockets and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following:-

One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One exhaust fan point controlled by one, one way switch.

One bell point controlled by one push switch.

One switch socket outlet modular type 3 pin 6 amp on same board.

One light point controlled by two, two way switches,

All as per item No 148 above but 1.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on independent board.

All as per item No 148 above but 2.5 sq mm cable size with 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Material & labour for point wiring on surface complete with ZHLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including PVC casing/caping of size 20 x 12mm to 25 x 16mm, ISI marked, including all accessories, and making good the disturbed surface, with and including suitable modular boxes surface type, switch plates and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following:-

One light point controlled by one, one way switch.

One ceiling/exhaust fan point controlled by one, one way switch.

One 3 pin socket outlet 6 amps on same board.

One 3 pin socket outlet 6 amps on independent board.

All as per item No 151 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Material & labour for cutting & taking out the existing surface/sunken box/switch plate with switches/sockets and replacing with the following and making good the disturbed surface to match the existing complete all as specified and as directed .

Modular metal flush box with modular cover plate with frame 1 or 2 Module

Modular metal flush box with modular cover plate with frame 3 Module

Modular metal flush box with modular cover plate with frame 4 Module

Modular metal flush box with modular cover plate with frame 6 Module

Supply & Fix in repair LED security light fitting 25 W, IP 66 rating, made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver, fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V including security ligh bracket made out of 25 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts complete all as specified and as directed. Make : CG Cat Part No. LSTS-25-CDL-M or equivalent model in Bajaj/Wipro/Philips

Supply & Fix in repair master led tube 4ft 20 W LED Tube Polycarbonate type having nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W including driver complete all as specified and as directed. Make : CG Cat Part No. LT8-20-865-(2) or equivalent model in Bajaj/Wipro/Philips.

Supply & Fix in repair decorative box type fitting with coloured end caps pre wired for LED tube energy of 20 Watt all as specified and as directed. Make : CG Cat Part No. DMLN1LT8-16 or equivalent model in Bajaj/Wipro/Philips.

Supply & Fix in repair Surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG Cat Part No. CCS-102-10-65-SL-DP-NWH or equivalent model in Bajaj/Wipro/Philips.

Supply & Fix in repair Decorative LED light 18 watt round/square surface mounting flat panel type complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make : CG Cat Part No. LCDSPLN-R-18W-CDL or equivalent model in Bajaj/Wipro/Philips.

Supply & Fix 10 Watt LED bulkhead light IP 65 rated complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make :CG Cat Part No. LBHE-10-CDL or equivalent model in Bajaj/Wipro/Philips.

Supply & Fix 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and directed. Make : Legrand Cat No. 675530 or equivalent model in Seimens/ Anchor Roma

Supply & Fix calling bell ding-dong type, AC, single pole one way 230 volts all as specified and directed. Make : Legrand/ Anchor/ Havells

Supply & Fix bell push switch, modular type, 6 Amps, 1 module, 250 volts all as specified and directed. Make : legrand Cat No. 675504 or equivalent model in Seimens/ Anchor Roma

Supply & Fix switch modular type, single pole, two way, 6 amps, 250 volts, all as specified and directed. Make : Legrand Cat No 675502 or equivalent model in Seimens/ Anchor Roma

Supply & Fix Switch without indicator, modular type, single pole one way 6 Amps, 250 volts, all as specified and directed. Make : Legrand Cat No. 675501 or equivalent model in Seimens/ Anchor Roma

Supply & Fix socket modular type single pole one way 6 Amps 3 pin, 250 volts all as specified and directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ Anchor Roma

Supply & Fix for ceiling rose, surface bakelite, 65 x 50 mm, three terminals ISI marked all as specified and directed.

Supply & Fix socket modular type 16 Amps, 3 pin combine, 2 module, 240 volts all as specified and directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ Anchor Roma

Supply & Fix switch modular type 16 Amps, one way with indicator, 1 module, 240 volts all as specified and directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ Anchor Roma

Supply & Fix stepped type electronic fan regulator flush type for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix bell push switch, flush type, 5 Amps, 250 volts all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix switch, flush type, single pole, two way, 6 amps, 250 volts, all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix Switch piano, flush type, single pole one way 6 Amps, 250 volts AC, all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix socket, flush type, 6 Amps, 3 pin, 250 volts all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix socket flush type 6/16 Amps, 3 pin combine, 240 volts all as specified and directed. Make : Anchor Penta/ Havells/ Cona.

Supply & Fix switch piano, flush type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Anchor Penta/ Havells/ Cona.

Taking down DB/main switch of any size including MCBs and making good disturbed surface to match the existing complete all as specified and as directed.

Supply & Fix sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 all as specified and directed. Make : Legrand /L&T/Seimens.

Supply & Fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and directed. Make : Legrand /L&T/Seimens.

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and directed. Make : Legrand /L&T/Seimens.

Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and directed. Make : Legrand /L&T/Seimens.

Supply & Fix MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and directed. Make : Legrand /L&T/Seimens.

Material & labour for Earthing complete with galavanized steel earth electrode, 600 x 600 x 6.00 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI wire of 4 mm dia through GI pipe 15 mm dia light grade by means of bolts, nuts, check nuts and washers of galvanised iron or steel with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion including necessary earth work and excavation in any type of soil, PCC pit 1:3:6, type C1 using 20mm graded stone aggregate, 40 mm thick precast RCC cover 1:2:4, type B-1 using 20mm graded stone aggregate reinforced with 8 mm dia TMT bar @ 75 c/c both ways with 02 Nos lifting handles of 12 mm dia MS plain bar, with funnels & wire mesh complete all as specified and directed. Note: GI earth lead & protection pipe upto 7.5metres long shall be deemed included in the rate quoted.

Disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, wall fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins and flexible copper wire complete all as specified and directed. Note: Rewinding work and replacement of spares shall be measured and paid separately under appropriate items.

Material & labour for Rewinding of ceiling fan motor assembly complete with super enameled copper winding wire of suitable gauge for any make and any size of fan including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete all as specified and directed.

Supply & replace ball bearing 6201/ 6202/ 6203 for 48 " (1200 mm ) sweep ceiling fan complete all as specified and directed.

Material & labour for Rewinding of exhaust fan motor assembly complete with super enamelled copper winding wire of suitable gauge including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete for size upto 12" (305 mm) sweep complete all as specified and directed.

Supply & replace Fan Blade PVC suitable for 300 mm sweep of existing Exhaust fan complete all as specified and directed.

Supply & replace exhaust fan motor metal body suitable for 300 mm sweep of existing Exhaust fan PVC body complete all as specified and directed.

Supply & replace Fan Blade Metal including frame and legs suitable for 300 mm sweep of existing Exhaust fan metal body complete all as specified and directed.

Supply & replace exhaust fan motor metal body suitable for 12" (305 mm sweep Exhaust fan metal body, of best quality complete all as specified and directed.

Taking down unserviceable water heater (Geyser) of size 25/35/50 Ltrs for checking of defects and repairs including disconnecting water connection by unscrewing/ cutting the existing GI pipe, threading as necessary for new connection (including GI tubing in short lengths/fittings) replacing unserviceable spares and refixing after carrying out repairs and replacement of spares including connecting to water supply, electric connection using suitable size multistranded copper cables and testing complete all as specified and directed. Note : Spares shall be measured and paid separately under relevent items.

Supply only heating elements for geysers upto 2.5 KW capacity of any type and any make all as specified and as directed.

Supply only round/rectangular type of indicating lamp (Red/ Green) for Geysers all as specified and as directed.

Supply only thermostat suitable for geyser of any capacity, any make(as per sample) all as specified and as directed.

Note : The amount against Schedule of Credit on Page No. 47 (R) shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

Rehal Construction

M/s Shrangi Rishi Construction