Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹26.8 L+₹229.50 (<0.01%)Rejected-Finance S NO 7 3 FLAT NO 4 HILL VIEW RESIDENCY LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹29.5 L+₹2.7 L (10.0%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L3 | Rejected-Finance High Rate | |
| 4 | L4₹30.7 L+₹3.9 L (14.5%)Rejected-Finance 759 126A FLAT NO 08 SUNDERBAN APT NEAR DR KELKAR HOSPITAL PRABHAT ROAD PUNE 411004 INDEX NO C 402 HQ CEPZ PUNE | PUNE | MAHARASHTRA | 411004 | L4 | Rejected-Finance High Rate |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8319 ADDN ALTN TO SHED NO 89 INCLUDING SECURITY WALL AROUND PERIPHERY OF AGE B R II UNDER GE (CENTRAL) PUNE
2022_MES_532306_1
8319 ADDN ALTN TO SHED NO 89 INCLUDING SECURITY
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹67,000
Yes
15 Sept 2022
20 Jun 2022
29 Jul 2022
20 Jun 2022
27 Jul 2022
4 Jul 2022
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed
M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 compete all as specified and directed.
M&L rendering 15 mm thick on brick work or stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:4 complete.
M&L rendering 15 mm thick on stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:6 finished with sponge finish all as specified and directed.
M&L for preparation of newly plaster surface of wall and apply two coat of cement base paint over a one coat primer all as specified and directed.
M&L for newly plaster surfce of wall and apply two coat of oil bound destemper over a coat of primer including thin layer of wall care putty for smooth finished all as specified and directed.
M&L for preparation of old surface of wall and apply one coat of cement base paint all as specified and directed.
Preparing Old plastered surfaces of wall and applying two coats of oil bound distemper all as specified.and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)rubbish off the premises all as directed.
Demolation of stone slab/tiles of any description or thickness laid, bedded and pointed in cement mortar/in floor, skirting, hard standingg, Apron etc
M&L for Glazed Coloured ceramic tiles in verticle surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed flush in white or colour cement to match including 10mm thick plaster in C:M 1:4 as a backing coat complete all as specified.and directed.
M&L for coloured non-skid tiles 300x300x7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified.and directed.
M&L for light shade virified Ceramic tiles 600 x 600 x 10 mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 completeall as specified.and directed.
Ditto all as per item No 13 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:4, complete all as specified.and directed.
M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agreegates as a levelling course in flooring, finished even and fair complete all as specified.
Dismantling of battens for tiles of any size including tilting fillets spacing exc.15 cm complete all as specified.
Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. cross sectional area more than 40 sqcm in un-framed work complete all as specified and directed.
M&L for second class hard wood scantiling clean swan secured with nails as in fillet, rafter, purlins etc over 40 sqm in section all as specified and directed.
S&F Gl frame work of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. Applying two coats of oil bound istemper over a coat of primer including thin layer of wall care putty for smooth finished all as specified. Note:- ceiling board will be measured & paid separately
M&L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including applying two coats of oil bound distemper over a coat of primer including thin layer of wall care putty for smooth finished complete including dismantling of old ceiling all as specified and as directed. (Note : Frame work for ceiling shall be measured and paid separately)
Taking down chowkat exc 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame). complete all as specified and as directed
Taking down Chowkats or frames not exc 1.5 Sqm each (without taking off shutters from the frame). complete all as specified and as directed
S&F pressed steel door frames of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete, as specified.
S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt , length of bolt 200 mm long .
S&F mild steel pressed handle, oval type, stove enamelled black of size 150 mm
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt in 300 mm long.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed
Supply and fixing factory Made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified.
S&F stainless steel Wire cloth 0.36mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed
S&F butt hinges 100mm size MS cold rolled medium weight all as specified.
S&F for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed
M&L Cutting holes in brick/stone walls in Cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required , exc half brick wall but not exc one brick wall complete all as directed
M&L for PCC (1:3:6) type C1 20mm graded aggeegates for fixing hold fasts etc.as directed.
S&F MS work as in small articles such as hold fast etc.complete all as specified.
S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.
S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg give on page 176 of SSR 2020 Part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.
S&F MS framed work such as grills , grating with ends of bar shoudered and/or riveted or forged into spikes , framed Guard bars, barred iron doors ,ladders , framed balusters walk way , railing and likes etc conformed to Fe-290, Gde-E-165 of MS angle or other section complete as directed .
S& F for powder coated aluminium frames and shutters sliding/openable/fixed/fully glazed/partially glazed/fully gauge/Skelton door/window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed. (Note : (i) Glass panes / wire cloth / particle board will be measured and paid seperately (ii) Rubber beading / packing will not be weighed alongwith aluminium section but same deemed to be included quoted rates .
S&F Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete.
S&F Sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip /oil putty in aluminum window/ ventilator shutter not exc 0.5 Sqm in each pane as directed.
S&F in repairs 10 Litre capacity low level PVC valve less symphonic action type flushing cistern white in colour with inlet, ball valve float complete all as specified and directed .
S&F in medium grade galvanised GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old GI tubing & connection of sizes 15mm bore dia all as directed.
S&F in medium grade galvanised GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old GI tubing & connection of sizes 20mm bore dia all as directed.
Supply and Fix rotational moulded polythylene water storage tanks, 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F in repair PVC 32 mm dia Flush pipe suitable for flushing cistern complete.
S&F in repairs PVC Connection 15 mm size with PTMT nuts of length 450 mm long.
Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580 x 440 mm, white, with integral foot rests with P or S trap, and all necessary fittings including provision of lime conrete etc complete all as specified and directed.
S & F in repairs vitreous China white wash down water closet pan pedestal pattern including fixing bolts, connection to drain and flushing pipe , PVC flish pipe 32 mm dia , white seat cover closed pattern with flat bottom (white colour) and cover andmild steel chromium plated hinging device complete all as specified and directed.
Supply and Fix in repairs vitreous china Wash hand basin flat back, size 630 x 450mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete
S&F chromium plated 15mm dia pillar taps , cast copper alloy with crutch or butterfly handle, screwed down, high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified.
S & F in repairs 15 mm dia fancy type chromium plated bib tap, cast copper alloy with crutch or butter fly handle , incl wall flange, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair, 15mm dia Angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed down high pressure with crutch or buterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F aluminium curtain rod 20 mm dia decorative type powder coated complete.
S& F decarative type funnel/bracket to suit the curtain rod of 20 mm dia aluminium powder coated complete.
S&F in repairs mirror of size 300 x 450mm and 5.5mm thick mounted on A.C building board 6mm thick including powder coated aluminium frame complete all as specified.
S&F in repair soap dish holder stainless steel of approx size 150 x 100mm complete all as specified and directed at site.
S&F in repair 600mm long stainless steel towel rail 'D' type complete all as specified and directed.
S&F grating dooms 100 mm dia of PTMT (minimum weight 25 gms) all as specified
Demolition and breaking of drain pipes AC/CI/PVC set in cement mortar or adhensive of 75 mm to 110 mm bore dia all as directed
S&F for 110 mm bore dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall / floor including clamp etc complete.
S&F for 75 mm bore dia SWR pipes single socketed in any length with rubber ring joints fixed to wall / floor including clamp etc complete.
S&F 75mm bore dia PVC (SWR) bends any radius complete all as specified and as directed.
S&F PVC (SWR) 75 mm dia vent cowl
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , shelve and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed
M & L chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide.
Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified
M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone agg asin PCC padding in roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface fineshed enen and smooth without using extra cement including necessary water liqual proofing chemicals @ 200ml per bag of cement all as specified and directed by the Engr-in-charge. (Note: WPC shall be measured and paid separately)
M&L for 100mm thick PCC (1:2:4) , type B1 (using 20 mm graded stone aggregate) as in hardstading finished with even and fair with using extra cement complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate )as in sub base complete all as specified.
M&L for 75mm thick PCC (1:3:6) type C-2 (using 20mm graded aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for PCC type C-1 (1:3:6) (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
S&F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality 'A' including necessary welding complete all as specified and as directed.
S & F for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.
S&F for roof trusses (framed), trussed, purlines, and fastening and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality -A complete all as specified and as directed.
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed
M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300 x 25 mm thick, set jointed and pointed in neat cement slurry with white cment & pigments in floor laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for preparation of new steel iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc primer all as directed
Supply and sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with waste pipe and coupling complete all as specified.
S&F anodised powder coated aluminum snap grid frame work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 32x24x2mm and 25x24x2mm respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.
M&L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / insertyed to trimber / GI / aluminium frame, fixed in ceiling complete all as specified.
S&F 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.
S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Aluminium die cast body) complete all as directed .
Supply and lay mat grass of approval quality after screening all stones and deleterious materials including mixing of required fetilizer for grass and leveling the ground pofile with filling of soft soil if reqd and watering complete all as specified and as directed.
Excavation in post holes (or similar holes) each n. exc 0.5 Cum and getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm including watering and removing surplus soil to a distance n exc 50 m and making good surface as in hard/dense soil complete all as specified and as directed.
Dismantling posts or struts on top of boundary wall (steel or RCC) embedded in concrete, any section, including taking out embedded portion and making good the distrubed surface all as directed
Dismantling fencing wire mesh/barbed wire/concertina coil of type and any discription and in any position ilncluding clearing away all grass vegetation, saplings, shrubs, brush wood, degrowth roots and tree not exc 30cm girth and removing complete all as specified and directed.
Dismantling of precast concrete block masonary built in cement Mortar including all quoins, arches , pillars etc complete all as directed.
Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation in hard/ dense soil and getting out complete all as specified.
M&L for PCC type D-2 (1:4:8) (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L reinforced cement concrete M-20 (Design Mix) using 20 mm graded stone aggregate as in foundation and plinth beams etc.complete all as specified and as directed.
M&L reinforced cement concrete M-20 (Design Mix) using 20 mm graded stone aggregate as in column, pillars, piers, paths and struts complete all as specified and as directed.
M&L reinforced cement concrete M-20 (Design Mix) using 20 mm graded stone aggregate in lintel beams, cantilevers, bressumers, lintels over 1.5m span etc. complete all as specified and as directed.
M&L galvenised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails , straining bolts including securing and tying at crossing with and provisions of galvanised mild steel wire staple or steel pins etc all as directed.
M&L for preparation of newly plaster surface of wall and apply two coat of cement base paint over a coat of primer all as directed.
Returning filling in including spreading, levelling, watering and wall ramming in layer nexc 25 cm in hard/dense soil complete.
Removing excavated material (Soil) to a distance beyond 500mtrs and upto total distance of 1.5 KM and depositing where directed at a level not exceeding 1.5m above the starting point all as specified & directed.
M&L for form work to sides of concrete foundations, footings, bases of columns, rarft and raft beams sides and soffits (if any ) of foundation & plinth, beams and similar work Vertical or to batter and rough finished the surface of concrete all as specified and directed.
M&L for form work to sides of pillars, posts, struts, pears, columns and stanchion rough finsihed the surface of concrete all as specified and directed.
M&L form work to sides and soffits of floor or roof beams (Flat), rough finished surfaces of concret all as specified and directed.
M&L mild steel TMT bars 10mm dia and over , cut to length , bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips complete all as specified and directed.
All as pr item 102 above but 5mm dia and over upto and including 10mm dia in stirrups spacer's and binders all as specified and directed
M&L for purpose made butt hinges and holdfast suitable for fixing of RCC columns confirming to Fe-295 Gde E-165 all as directed.
S&F for hasp and staple, hand made sliding bolt, clamps, hold fast, and similar work confirming to Fe-295 Gde E-165 complete all as directed.
S&F framed work such as barred iron door and similar work including intricate design work confirming to Fe-295 Gde E-165 complete all as directed.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting, embedding in cement concrete, MS flat at bottom etc and similar work confirminng to Fe-290 Gde E-165 complete
Taking down old u/s point wiring ( light / fan / socket / power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators, light fittings etc. removing materials for taking credit and making good the disturbed surfaces of walls/floors/ceiling etc.complete all as specified.
Taking down Main switches/DBs of any make and type including teak wood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.
Taking down ceiling fan/exhaust fan/Wall fan of any sweep, keeping with safe custody and refixing the same with replacement of 3 core PVC insulated PVC sheated multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal after over hauling the fan, Painting of ceiling fans with one coats of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc. complete all as specified.
M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS copper cable 1100 volts grade, IS - 694 marked in PVC casing & caping heavy duty ISI marked including all accessories with PVC modular surface boxes inluding modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-
(a) one light/fan point controlled by one No, one way switch all as specified
(b) One three pin 5 Amps socket outlet point controlled by one No, one way switch on same board all as specified
(c) One three pin 5 Amps socket outlet point controlled by one No, one way switch on independant board all as specified
(d) One bell/buzer point controlled by one bell push all as specified
All as per item No.115 above but with 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.
S & F modular switch 6 Amps, SP one way 230 Volt white ivory finish complete all as specified
S & F Modular switch 16 Amps, SP one way 230 Volt white ivory finish complete all as specified
S & F modular socket outlet 2/3 pin 6 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.
S & F modular socket outlet 2/3 pin 16 Amps, multipurpose 2 module 230 Volts single pole one way suitable for plug tops,complete all as specified.
S & F ceiling rose 2/3 terminals , PVC / polycarbonate, insulated body, ISI marked complete all as specified
S&F bell electrical ding dong including hard PVC board ISI marked complete all as specified
S & F for Bell push, flush type, 5 amp complete all as specified.
S&F Modular type stepped electronic fan regulator, 1 to 5 steps all as specified & directed
S&F sleek LED light fitting 10 watt complete in all respect having high luminaire, integrated LED channel with white acrylic cover of 10 Watt including dismantling old tule light fittings Conforming to Cat Part No.LUMINEPLUSBSLED865SPCSS Make :- Havells or equivalent as listed in list of makes Appdx 'A'.
Supply and fix in replacement LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 W LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including dismantling old tule light fittings Conforming to Cat Part No.ENDURALINEARNEOBS20WLED865SPCWH Make :- Havells or equivalent as listed in list of makes Appdx 'A'.
S & F in replacement of round recessed mounted AL die - cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15 Watt LED downlighter of white/neutral white color temperature etc. prewired and all accessories complete including dismantling old tule light fittings all as specified and directed. Make - Cat part No. BGSLO SLEEK 15W WH RD of Bajaj or equivalent as listed in list of makes Appdx 'A'.
S & F LED energy efficient street light fitting 25 Watt LED pressure die cast aluminium housing in heat resistant glass covered with IP-65 protection and including GI pipe as required length and size with fixing accessories complete including dismantling old tule light fittings all as specified and all as directed Conforming to Cat Part No.ENDURAPEARLSL25WLED757SASYTOPCMP Make :- Havells or equivalent as listed in list of makes Appdx 'A'. or equivalent as listed in list of makes Appdx 'A'.
Supply and fix LED Tube light fittings 2' x 2' sleek ofcapacity 28 watt environment freindly, new generation , aesthetically designed , ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 Volts complete with including all accessories internally pre-wired and necessary mounting arrengement with including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including dismantling old tule light fittings Conforming to Cat Part No. PLUTONE02X2PLR28WLED840S of Make :- Havells or Equivalant as given in Appx 'A' List of make all as specified & directed.
S & F MCB DB 4 way, TPN double door with 200 Amps rated busbar 415 Volt, with mounting arrangements for MCBs and wall fixing arrangements including making good disturbed surfaces& connecting with existing cable complete all as specified and directed.
S & F for MCB four pole of rated capacity 63 Amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F for MCB double pole of rated capacity 32 Amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 V breaking capacity , 10 KA , C- curve complete all as specified.
M & L for Sub main wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through non-metallic 20 mm PVC rigid, ISI marked and its accessories duly in PVC Casing & Caping on wall/ roof including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor complete including taking down old submain wiring all as specified. Note:- Two run of 4 sqmm conductor & one run of 4 sqmm conductor will be measured as on RM
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part - I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (Note:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)
R K CONSTRUCTION AND ENGINEERING
M/s.BAJRANG CONSTRUCTION
M/S NAVNEET S MORDE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .