REPAIR/MAINTENANCE OF LT PANEL, UG LT CABLES AND OTHER CONNECTED ITEMS AT ZONE-I AREA UNDER AGE E/M OF GE JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as specified and directed

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed

M&L for Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed

M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.

Dismantling and taking out UG cable any size unserviceable items fixed in any position and removal from site, all as directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 4 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm nominal cross section 4 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm nominal cross section 3.5 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed.

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 50 Sqmm nominal cross section 3.5 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 70 Sqmm nominal cross section 3.5 core laid in trenches,fixed to pole or passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed

S&F 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 95 Sqmm nominal cross section 3.5 core laid in trenches, passing through pipes including all necessary clamps,nuts, bolts washers complete all as specified and directed

S&F of galvanized iron pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint, complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

S&F, in replacement, MCCB, 415 volts, 04 pole, 63 Amps, 16 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make : Schneider Cat Part No LV510315 / L&T / C&S / Indo Asian / Havells

S&F, in replacement, MCCB, 415 volts, 04 pole, 100 Amps, 16 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make : Schneider Cat Part No LV510317 / L&T / C&S / Indo Asian / Havells

S&F, in replacement, MCCB, 415 volts, 04 pole, 160 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make : Schneider Cat Part No LV516313 / L&T / C&S / Indo Asian / Havells

S&F, in replacement, MCCB, 415 volts, 04 pole, 200 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make :Schneider Cat Part No LV525312 / L&T / C&S / Indo Asian / Havells

S&F, in replacement, MCCB, 415 volts, 04 pole, 250 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make : Schneider Cat Part No LV525313 / L&T / C&S / Indo Asian / Havells

S&F, in replacement, MCCB, 415 volts, 04 pole, 400 Amps, 50 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, complete all as specified and directed by Engr-in-Charge. Make : Schneider Cat Part No LV540319 / L&T / C&S / Indo Asian / Havells

Dismantling and taking down unserviceable / defective street light fitting / Flood light fitting of any wattage alongwith mounting bracket, flat iron clamp, nuts bolts etc. complete all as directed.

S&F of LED street light luminaire of 72 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. Make : Bajaj Cat part No ZELAP 86L WH PO TG SD/Crompton/Philips

S&F of LED street light luminaire of 90 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. Make : Bajaj Cat part No ZELAP 108L WH PO TG SD/Crompton/Philips

S&F of LED flood light luminaire of 100 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. Make :Bajaj Cat part No PRAZE F 120L WH NB-AS TG SD/Crompton/Philips

S&F LED step light 9 W with die cast aluminium housing with warm white COB LED reflector and IP65 protection and incl making all electric connection, complete all as specified and directed by Engineer in charge. Make :Bajaj Cat Part No BLSGV 9W LED WW PRO or equivalent make of Havells/crompton

S&F LED post tops 20 W with die cast aluminium housing and polycarbonate opal diffuser and IP protection and incl making all electric connection, complete all as specified and directed by Engineer in charge. Make: Bajaj Cat Part No BGCTNP 20W LED WH or equivalent make of Havells/crompton

S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed.

Supply, installation, testing and commissioning of LT panel board fabricated out of 3.15 mm thick powder coated CRCA Sheet with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 250 Amps 415 Volts indoor type floor mounted angle iron size 40x40x6 mm frame all as per required site of size not less than 1.3 mtr 1.1 m 0.3 m , installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 2.0 Sqmm including LED indicator for R, Y & B , 3 Phase Volt meter Digital type and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 25 KA 415 Volts, Make Legrand / Hager/Schneider. Outgoing : (a) MCB 63 Amps 4 pole 25 KA 415 Volts, 70-100%, 50 Hz - 01 Nos Make Legrand/ Hager/Schneider. (b) MCB 32 Amps 2 pole-10 nos Make Legrand/ Hager/Schneider.

Supply and fixing in replacement of LED indicator lamp Red , Yellow and Blue including wire and lugs etc complete all as specified and directed

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth strip 32x6mm, by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point , PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore medium grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

Less Schedule of Credit

SHREE BHAGWATI ENTERPRISES (BID ID -3115983)

S.R.Enterprises (BID ID -3115472)

Gaurav & company (BID ID -3120302)

M/S Anil Enterprises (BID ID -3116230)