SPL REPAIR OF JCOs/OR MD ACCN BLDG NO P-49 AT DID LINES, PROVN OF 01 X GUARD ROOM AND 02 X TOILET FOR SECURITY PERSONNEL AT RWA KARAM VIHAR AND PROVN OF RAIN PROTECTION SHED AND CONNECTED B/R WORK AT P-10 AT CASSEL ROAD UNDER GE (EAST) DELHI CANTT-10

Amount

Dismantling of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

Demolition of cement Concrete (unreinforced )Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking up or down steel tubing with connections for cleaning for prefixing or removing to store yard complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for prefixing or removing to store yard complete of bore 20mm all as specified .

Dismantling water tanks 1000 Ltrs capacity and removing to store.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

M&L for brick work with sub class 'B' straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 half brick thick, complete all as specified and directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6), complete all as specified and directed.

M&L for 1st quality Jointfree ceramic coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) as in Ground floor, complete all as specified and directed.

M&L for Rendering10 mm thick in CM (1:4) as in backing coat for fixing wall tiles, complete all as specified & directed.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 600mmx 300mmx 7 mm or 450mmX 300X 7mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for Marble work 16 to 18mm thick (table rubbed and polished) in steps, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete over and incl screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4, complete all as specified and directed.

Description all as per item No 16 above but as int skirting, steps, jambs, pillars etc over 10 cm rendering in CM 1:3, complete all as specified and directed.

M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, sub base to floor, benching for manholes with slightly rounded or chamfered on edges, incl necessary form work, complete all as specified and directed.

M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) using marble dust with admix?ture of pigment to match with shade of granite as specified complete incl 15m thick screed bed in CM(1:4), complete all as specified and directed.

M&L for drilling and making hole in marble/granite slab of cooking plateforme for cooking gas pipe etc not exc 25 mm dia all as directed by Engineer-in-Charge.

M&L for 75 mm thick in Plain cement concrete type C2 (1:3:6) (using 40 mm graded aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering,running rails and guides) and hanging; also fastening and fixing confirming to FE 290 gde E-165, complete all as specified and directed.

S&F Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.

S&F for 35 mm thickness flush shutters, solid core construction, with particle board core and plywood face panels both faces covered with decorative face veneer with lipping incl edge to match frame complete all as specified and directed.

S&F, Factory made solid coloured PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC colour sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete in opening as per specification & drawing all as directed

S&F, factory made solid coloured panel PVC door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded wood grain printed PVC sheet cover PVC "C" channel having a wood grain printed PVC sheet strip of 20mm width stuck in side with solvent cement for styles and wood grain printed PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable decorative PVC beading of 10mm x 10mm and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II.

S&F solid PVC board plain sheet of 15 mm thick for kitchen cabinet & wardrobe/ cupboard etc similar work ncluding necessary fixing arrangement complete all as specified and directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

S&F solid PVC board prelaminated coloured sheet of 15 mm thick for kitchen cabinet & wardrobe/ cupboard etc similar work ncluding necessary fixing arrangement complete all as specified and directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete.

S&F powder coated three track aluminium (glazed & gauzed) windows shutter sliding type with Desert Cooler opening incl 3mm thick glass and stainless steel wire mesh (02 shutters with glass and 01 portion with wire mesh) and balance portion with fix glass wihtout sash bar aluminium section weighning minimum 0.55 kg per metre including necessary jointing cleats, glazing clips , rubber packing, anodised aluminium beading, sliding channel, rooler screws including frame all all fittings complete all as specifies and directed by Engr-in-Charge . Note- cost of glass and wire mesh shall deem included in the quoted rate.

S&F powder coated three track aluminium (glazed & gauzed) windows shutter sliding type incl 3mm thick glass and stainless steel wire mesh (02 shutters with glass) and 01 portion with wire mesh and balance portion with fix glass wihtout sash bar aluminium section weighning minimum 0.55 kg per metre including necessary jointing cleats, glazing clips , rubber packing, anodised aluminium beading sliding channel, rooler screws including frame all all fittings complete all as specifies and directed by Engr-In -Charge . Note- cost of glass and wire mesh is included in the rate

S&Faluminium anodized grills (DECO) with 6mm x 5mm aluminium section having square gap of 100mm wide with fixing arrangement complete all as specified and directed

S&F 100mm dia Aluminium anodised handle fabrictaed type polished bright finish, complete all specified and directed.

S&F150 mm dia Aluminium handle (cast type) fixed with screw complete all as specified and directed.

S&F Continuous (Piano) hinges, brass body 30 mm width of flaps (when open).

S&F 150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.

S&F Stanless Steel Butt Hinges 100mm long

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F galvanised mild steel wire cloth 0.41 mm nominal dia of wire of average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staple

S&F in repair Floor 150 mm long door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified as directed.

M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 ete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F Rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F in re-pair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 20mm-45gms) complete

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surfaces.

Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges TypeB0 1:2:4 (12.5mm graded in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, watertroughs and the like including,weathering, slightly roundedor chamfered angles and throating, as directed

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M&L for 15 mm thick external rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )

M&L Complete removal of existing treatment from walls/ ceiling and preparation of old surfaces, of any description, complete all as specified.

M&L for Preparing new plastered surfaces of walls two coats of exterior emulsion paint (Weather Coat) over a coat of priming paint over a coat of 1mm thick putty complete all as specified

M&L for complete removal and exisitng treatment of old decorated surfaces of walls and ceiling and applying two coat of exterior emulsion paint weather coat over a coat of primer over a coat of 1mm thick wall putty complete all as specified

M&L Preparing new plaster surfaces of walls applying two coats of OBD over a coat of primer over a layer of 2mm thick wall putty, complete all as specified and directed.

M & L for two coats of OBD on wall surfaces incl preparation of old wall surfaces over a layer of 2mm thick wall putty, complete all as specified and directed.

M&L Preparing new ceiling surfaces applying two coat of OBD complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/ zinc chrome primer, complete all as specified and directed.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F in repair PTMT grating round 150 mm size, complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in replacement Stainless steel plate rack made of 1mm thick stainless steel sheet of size 750mm x 900mmx250mm designe and pttern approved by GE complete all as specified and .

S&F in replacement Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed, complete all as specified and directed.

S&F in replacement Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, fixed in repairs, complete all as specified and directed.

S&F in replacement Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair, complete all as specified and directed.

S&F in replacement Stop valves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed, complete all as specified and as directed.

S&F in replacement Stop valves/Angle 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in replacement for Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S&F in replacement Brass chromium plated shower rose 125 mm size with or without swivel joints, any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F in replacement Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in replacement Vitreous china squatting pan of Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring, complete all as specified and directed. (Make: - Hindware/ Parryware/ Johnson)

S&F in replacement vitreous china wash basin white flat back size 550 x 400 including brackets, including cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc, complete all as specified and directed. (Make: - Hindware/ Parryware/ Johnson)

S&F in replacement PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description. (Make: - Parryware or equivalent in Hindustan Sanitary ware)

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete.

Supply only Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms), complete all as specified.

S&F PVC waste pipe 1m long suitable for 32m dia waste coupling, complete all as specified.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified.

S&F PVC (SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC (SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, laid in trenches or floors, complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia, complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia, complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore, complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvant cement, complete all as specified and directed.

S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe, complete all as specified and directed.

S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe, complete all as specified and directed.

S & F in repair curtain rails 25 mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, weatherings, throating etc. and setting in CM 1:4 complete with joints to match etc using type B1, 1:2:4 (using 20mm graded stone aggregate), complete all as specifed and directed

Water proofing treatment to sunken floor and verticle comprises the following provisions as under:- (a) Dismantling of floor & lime concrete etc removal all loose particle alongwith existing water proofing treatment (any No of layer) with wire brushes and cleaning the surface with water.(b) Brushsing cement slurry with 1.2Kg/Sqm of cement duly blended with and including water proofing compound (Make -Dr Fixit). (c) 15 mm thick (average thickness) plastering in CM 1:3 mixed with WPC in sunken surface ,including wall . the corner of sunken portion shall be roounded in concave shape and adequate slope shall be maintain during plastering to accomodated sump pipe and ponding the sunken portion with water minimum 48 Hrs .(d) Applying self adhesive type APP base polymeric membrane minimum weight not less than 3.00 Kg /Sqm and mimimum 3mm thick laide over sunken floor and sides fixed with sealing compound at all joint to entire satisfaction of Engr-in Charge. (MAKE- IWP/ STP) (e) Filling the sunken area with Brick bats or PCC 1 :7:12 as in lean concrete under floor.

Demolition of mud phuska, roof treatment any thickness incl plastering and leaping plaster any thickness incl old brick tile/APP and removing rubbish from site and dumpling as area specified by delhi munciple corporation complete all as specified and directed.

M&L for cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3, complete all as specified and directed.

M&L for PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface complete all as specified and directed.

M&L for water proofing treatment on roof slab consisting with following operation: (i) Cleaning surface by wire brushes, brooming, removing dust and applying with bitumen primer confirming to IS 3384- 1986 @ 0.50 Kg per Sqm. (ii) Applying a tack coat of hot bitumen VG-10 @ 1.2 Kg per Sqm for water proofing membrane (iii) Applying of Polymeric water proofing membrane wt not less than 3 Kg per Sqm over entitre area with overlapping and sealed all as specified and directed. (iv) Again applying hot bitumen VG-10 @ 1.2 Kg per Sqm over water proofing membrane (v) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above

M&L for 10 mm thick screed bed on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately)

M&L for cement concrete tiles 25cm x 25cm x 20mm thick machine pressed laid on water proofing membranes and jointed flush pointed in CM 1:3 with 5% of crude oil, complete all as specified and directed.

M&L for washed stone grit plaster on exterior wall in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) throwing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 Cement : 1/2 coarse sand : 2 Stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified.

M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting upto 50mm thick with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 2 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 2 storey bldgs/in floor roofs.

Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for plain cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) 100mm thick, complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material not exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M & L for RCC M-25 (design mix) as in foundation, including rafts , footings , foundation beams, plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete, complete all as specified and directed.

M & L for RCC M-25 (design mix) as in columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M & L for RCC M-25 (design mix) as in Beams , cantilevers, bressummers, lintels over 1.5 m span etc, complete all as specified and directed.

M & L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors , roofs, landings , balconies, canopies, deck slabs and shelves etc complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking bending spirally & binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions size of square, rectangular or polygonal for flat rough finished surfaces complete all as specified and directed.

M & L for form work to edges of concrete flats, treads breaks in floors , window cills , concrete railling, opening in concrete walls, floors and roofs RCC/PCC bands floors roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or slooping and similar work exc 10 cm and not exc 20 cm wide surface finished rough complete all as specified and directed.

M&L for good quality (Soil) Earth Soil spreading, levelling in layers not exc 25 cm thick each layer with well ramming including watering as required under the floor, complete all as specified and directed. (Note :- Earth Soil available surplus soil from the excavation at ground shall be utilize.)

M&L for 75 mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed

M&L 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:6 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.

M&L 18-20 mm thick machine cut kota stone in riser of steps, skirting, dado and pillar laid over 10 mm thick screed bed of CM 1:3 including rubbing and polishing complete all as specified and directed.

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and incl 15 mm thick avg screed bed in CM 1:6, complete all as specified and dirtected.

M & L Coloured Glazed ceramic tiles 350 x 250 x 7mm/ 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match. Over and incl 10 mm thick rendring/ backing coat in CM 1:3, complete all as specified and dirtected.

Materials and labour for Box type steel window 1.25mm thcik made of ERW tube P-Section of size 60x25mm double rebated outer frame comprise of glazed skeleton of gauzed skelton shutter (two gauged shutters and two glazed shutter) of ERW tube P-Section size 50x20mm and 1 mm thick one/two Nos openable leaf consisting of two Nos shshbar of T-Section 20x3mm welded to frame with one No vertical mullion of ERW box type T-Section of size 60 x 25mm and 1.25mm thick and FI 2mm thick welded/screwed to frame for fixing of glass incl fittings and fixture like Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, hold fast etc (a) holdfast 150mm long of 120mmx3mm made to shape 04 Nos per window (b) handle of Z section 20mmx25mm,100mm long 1 Nos per leaf (c) MS Tower 150mm long 2 Nos per lead (d) Z section 20mmx25mm, 100mm long stopper 1 No perleaf (e) cleat 55mm long of hallow square 15mmx20mmx63mm welded to hinge 1 No per leaf (f) MS pinton hinges of size 75mmx12mm 2 Nos per leaf

S&F in repair mild steel box type ventilator fixed type with galzing bar without wire mesh & glass primer coated (without guard bar / gril).

S&F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate, etc, complete all as specified and directed

S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board med density wood particle board with commercial face veneers,supplied and fitted to chowkats.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & directed

S & F in 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

Material and labour for preparation of new surface decorated brick/concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint etc complete all as specified and directed by Engr -in Charge.

M & L for 1mm to 2mm thick wall care putty on new any type of surface of wall/ ceiling including sand papering thus making surface even & smooth, complete all as specified and directed ( Make : Birla white / JK white wall care putty and as per make of list of CA)

M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coats of Oil Bound Distemper using roller brush, complete all as specified and directed.

Description all as per Srl Item No 140 above but on celling surafce etc, complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface with broken stone aggregate complete all as specified and directed by Engr -in Charge.

S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, brackets for flushing cistern ,PVC (SRW) 'P' trap including provision of cement concrete bedding etc complete all as specified and dirtected by Engr-in-Charge .

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of PTMT complete all as specified and dirtected by Engr-in-Charge .

S&F Vitreous China bowl urinal flat back , size of 465 x 355x 265 mm white (minimum), with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing flushing cistern with brackets, flush pipe, complete all as specified and directed by Engr-in-Charge.

S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket ,32mm bore PVC flush pipe complete all as specified and directed

S&F 15 mm angle cock/ stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed.

S & F 15 mm bore bib tap , chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specifed and directed.

S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid on walls complete all as specifed and directed.

S & F 75 mm dia PVC cowls

S & F 100 mm dia PVC floor trap , with ss grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 20 mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer to receive further treatment, complete all as specified and as directed. Make: Asian Paints , ultratech or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @ 2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: Smart Care Damp Proof of Asian Paints or equivalent in and STP. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer.

M&L for DWCPE (SN8) drain pipes of 150 mm bore laid in trenches and jointed and tested complete all as specified & directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of pipes, 150mm bore, in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including necessary reinfocement, complete all as specified and as directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

S&F steel work in tubular trusses, doors , posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed

S&F Mild steel screw bolts 5 to 10 mm dia ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , n exc 5 cm long complete all as specified .

Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L for point wiring with single core (FRLS) PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly including concealed PVC conduit pipe 20mm dia and modular box. covered with modular plate (top cover) for mounting modular switches, sockets or fan regulators etc for one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.complete all as specified and as directed. Note : Cost of suitable modular metal flush box, white cover plate with frame shall be deem inclusive in quoted rates.

Description all as per item No 167 herein before but one socket outlet point 5 amps on the same board.

Description all as per item No 167 herein before but one socket outet point 5 amps on the independent board.

Description all as per Srl Item No 167 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular socket outlet 6 amps, 5 pin 2 module all as directed.

S&F modular socket outlet, 6 & 16 amps 6 pin multipurpose combined, 2 module all as directed.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F modular Step Fan regulator, 120 watts single / double module all as directed.

S & F of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.

S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan, 1200 mm suitable for regulator, not less than 350 RPM, not less than Air delivery 210 cum/minute, voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades.. The fan shall have BEE 5 star rating and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.

S&F of Ventilating fan 200 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F of MCB 'C' Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.

S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock, complete all as specifed and as directed.

Supply and fixing of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm × 60cm and 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, PCC 1:3:6 type C1 pit and precast cover all as shown in electrical plate No. 3 connected to earthing test point, all as specified including testing on completion.

Supply, lying and testing insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 CORE, complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layers of sand (8cms deep before laying the cable and 15 cms deep after laying) complete all as specified and directed.

Supply and laying burnt bricks class - B for protection of cable, complete all as specified and directed.

S&F of Galvanised steel tubing light grade of size 40mm bore for road crossing passing cable, complete all as specified and directed.

Cutting of GI Pipe Line 50mm dia medium grade for intersection of tee, complete all as specified and directed.

M&L for Tubes, 'Medium grade of 07 bore (25mm)' galvanised, with all fitting and fixed complete to wall and ceilings or laid in floors, complete all as specified and directed.

BLANK

M&L for Gun-metal, globe or gate valves bore dia of (20mm), with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, light fittings , ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface complete all as directed.

S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.

Material and labour submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

Material and labour submain wiring complete with 2 x 10 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

Supply and fixing in replacement electric bell of DINGDONG type, 6 Amps, 240 volts, single pole, connections complete all as directed.

Supply and fixing in replacement of wall light fitting comet type for LED lamp, connections complete all as directed.

S&F in replacement of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.

Taking down of ventilating fan any type, size complete all as specified.

Taking down ceiling fan/ Ex fan/ wall fan, sealing cable end dismantling blades and removing fan and blades to deposited E/M store yard complete all as specified.

S&F of ceiling fan complete with blades ,down rods and accessoriess ,230 volt ,1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rated with BLDC with remote control for operating , complete all as specified.

S&F of Exhaust fan 300mm sweep single phase( inbuilt gril), fixed in wall with proper nuts & bolts as reqd and incl connecting provn of PVC insulated and sheathed three core copper conductor flexible cable of size 23/0.0076mm to connect exhaust fan to ceiling rose all as directed.

Taking down of Geyser any type ,size & to deposited E/M store yard complete all as specified.

S&F in replacement of MCB DB conforming to IP 43 - IK 09 with double door, SPN 16 way 230 Volt double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement in replacement of MCB C curve, 10 kA, 63 Amp, SPN with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCCB 3 pole ,415 V Adjustable type 160Amp with breaking capacity 16KA. complete all as specified and as directed.

Supply and fixing of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as specified and as directed.

aggarwal engineers contractors (BID ID -3515493)

garnet engineers contractors (BID ID -3517445)

Akhil Enterprises (BID ID -3518474)