Repairs to Patkul to Magarwadi Taluka hadd VR 324 Ch 0/000 to 5/000 Tal Mohol

Excavationforcatch/sidewatergutterinallsortsofsoilstothespecifiedsectionincludingstackingtheexcavatedstuffinaregularbundanddisposingofunsuitableorexcess stuff as directed all sorts of soils.2.18

Providing earth work in embankment with approved material obtained from department all and upto lead of 50m.including all lifts,laying in layers of 20cm.to30cm.thickness breaking clods,dressing to there quiredlines,curves,grades&section,watering and compaction with vibratory roller to achieve not less than 97% of standard proctor densityetc. complete ( Material obtained from departmental Land) SSR 2022-23 P NO 2.27

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification Including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates).SSR P.No.30/3.35b

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type A seal coat but excluding prime / tack coat. For Bitumen VG-30 bulk--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller SSR 21-22 /PNO/INO 36/4.08

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)SSR 4.01 MORTH 513

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSR 2021-22 P.No. 23 / 2.29

Spreading hard murum for side width complete Spec. No.: MORTH 408 SSR 2021-22 P.No. 23 / 2.30

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 800 mm diameter in proper line, level and slope etc. complete.