Loading
Loading…
Loading…
Tender Value
₹12.4 L
EMD Value
₹24,805
Closing Date
6 Aug 2026, 11:00 am5d left
XEN CP3 SEC 16 CHD
O/o XEN CP3 SEC 16 CHD
PROVIDING EXHAUST AND FRESH AIR SYSTEM AT LAKE CLUB KITCHEN. IN LAKE SPORTS CLUB SECTOR-5, CHANDIGARH.
2026_CHD_94399_1
CP3/2026/2994422
Open Tender
Civil Works
Percentage
90 days
SECTOR 5 CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹24,805
30 Jul 2026
30 Jul 2026
6 Aug 2026
30 Jul 2026
6 Aug 2026
30 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Suppling & Fixing of SS HOOD (Size – 36”x20”x30’) Hood of Material Stainless Steel (Jindal) 22 gauge SS 202 grade sheet (Jindal) with oil filter and oil trap complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 9.13 | Rmt | 22,060.3 | ₹2,01,410.54 |
| 2 | Suppling & Fixing of GI DUCT WORK G I (TATA / SAIL) 24 gauge sheet Duct complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 220 | Sqm | 1,933.7 | ₹4,25,414 |
| 3 | Suppling & Fixing of EXHAUST AIR MACHINE - 8000 CFM Aluminum section, Double Skin (Outer skin 24G Pre-coated GI and Inner 24G plain GI with 25 mm thick mm thick PUF insulation) with, wet section. Nicotra Blower, Curved Belt Driven, motor Crompton 7.5 HP etc. complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 1 | Pcs | 2,44,838.6 | ₹2,44,838.6 |
| 4 | Providing and Fixing FRESH AIR SYSTEM - 8000 CFM Aluminum section, Double Skin (Outer skin 24G Pre-coated GI and Inner 24G plain GI with 25 mm thick mm thick PUF insulation) with cooling pad 8" with 18G SS Tank Water Recirculation Little Pump 650 msp X 1 Nos. Nicotra Blower, Curved Belt Driven, motor Crompton – 5 HP etc. complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 1 | Pcs | 2,55,967.7 | ₹2,55,967.7 |
| 5 | Providing and Fixing of ALUMINIUM FRESH A.IR GRILL (Size – 30”x6”) material 12 mm powder coated aluminium angle frame with fins as per approved drawing complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 7 | Pcs | 2,344.1 | ₹16,408.7 |
| 6 | Suppling & Fixing of DUCT DAMPER (Size – 10”x10”x4”) MS powder coated sheet Made up of 20 gauge SWG with Handle for Air control complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 11 | Pcs | 2,031.1 | ₹22,342.1 |
| 7 | Providing and Fixing EXHAUST & FRASH AIR MACHINE ELECTRIC WORK
Electrical work of above machine fitting, 4 core 10 mm Aluminum wire – 25 to 35 meter & 4 core 6 mm Coper wire 45 to 55 meter (approx.), 2 pair MCB + 2 set on – off Starter without Box complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 1 | Job | 47,993.9 | ₹47,993.9 |
| 8 | Providing & fixing of EXHAUST & FRASH AIR MACHINE PLUMBING WORK
Plumbing work of above machine fitting, 12 mm CPVC Pipe 7 to 10 meter (approx.),Water gate valve with fitting complete in all respects same as per direction and to the entire satisfaction of Engineer-in-charge. | 1 | Job | 25,875 | ₹25,875 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_115806.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].