Loading…
Loading…
Tender Value
₹18.3 Cr
EMD Value
₹28.3 L
Closing Date
9 Jul 2026, 10:30 am7d left
EE Hamirpur
Executive Engineer HPPWD Division Hamirpur
SH Construction of Building portion of second floor including roofing and all internal finishing work of First floor and second floor
2026_PWD_137842_1
Balance work of New Bus Stand Hamirpur at Pucca Bharo
Open Tender
Civil Works
90 days
Hamirpur
Please refer Tender documents.
15 documents required · 15 mandatory
₹20,000
EE Hamirpur
₹28.3 L
2 Jul 2026
2 Jul 2026
9 Jul 2026
2 Jul 2026
9 Jul 2026
2 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm ( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 447.3 | Per square metre | 597.2 | ₹2,67,127.56 |
| 2 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25(M-Twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with minimum cement content of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement in all work upto plinth level in foundation, footings , bases of columns and the like and mass concrete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 99.09 | Per Cubic Metre | 9,159.8 | ₹9,07,644.58 |
| 3 | Centering and shuttering including strutting, propping etcetera and removal of form work in Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 60 | Per square metre | 274.5 | ₹16,470 |
| 3.01 | Centering and shuttering including strutting, propping etcetera and removal of form work in Suspended floors, roofs, landings, balconies and access platform including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 1,912.4 | Per square metre | 672.4 | ₹12,85,897.76 |
| 3.02 | Centering and shuttering including strutting, propping etcetera and removal of form work in Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 2,836.97 | Per square metre | 538.9 | ₹15,28,843.13 |
| 3.03 | Centering and shuttering including strutting, propping etcetera and removal of form work in Columns, piers, abutments, pillars, posts and struts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 732.91 | Per square metre | 694.1 | ₹5,08,712.83 |
| 3.04 | Centering and shuttering including strutting, propping etcetera and removal of form work in Stairs, (excluding landings) except spiral stair cases including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 89.14 | Per square metre | 645 | ₹57,495.3 |
| 3.05 | Centering and shuttering including strutting, propping etcetera and removal of form work in edges of slabs and breaks in floors and walls under 20 cm (twenty centimetre ) wide including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 58 | Per Running Metre | 139.1 | ₹8,067.8 |
| 3.06 | Centering and shuttering including strutting, propping etcetera and removal of form work Walls (any thickness) including attached pilasters, buteresses, plinth and string courses etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 387.2 | Per square metre | 559.4 | ₹2,16,599.68 |
| 4 | Steel reinforcement (TATA /SAIL steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500 D ( five hundred D) or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | 3,30,739.5 | Per Kilogram | 105.7 | ₹3,49,59,165.15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
SBDBUSSTAND.pdf
Tender Documents • 4.67 MB
BOQ_204152.xls
BOQ • 0.53 MB
Download all tender documents and submit your bid