REPAIR AND PAINTING TO CERTAIN STEEL FURNITURE, REPAIR TO GI CHARPOY PLY TOP AT AF STN HASIMARA AND REPAIR AND PAINTING/POLISHING OF VARIOUS EXISTING FURNITURE AT IMTART UNDER GE (AF) HASIMARA

Amount

STEEL FURNITURE M & L for replacement of seat of chair cushion seat and back with arm with 12mm thick plywood, Grade BWR, commercial type covering with foam cushion of 32 density, 50mm thick of size 450mmx445mm covered with regzin cloth as per sample approved duly stiched complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

All as per serial item No. 01 above but for back of size 510mmx430mm of chair cushion seat and back with arm complete all as specified and directed. (Drg No. TP)

M & L for replacement of arm (best quality) of chair cushion seat and back with arm as per existing size and specifications complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of unserviceable broken leg of bed side locker steel made out of 1mm thick mild steel black sheet, fixed by welding and applying two coats synthetic enamel paint (1st Grade qualtity) over a coat of red oxide zinc chrome primer after preparation of surfaces complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

S & F in repair 100 mm size hasp & staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair brass chromium plated handle, 100 mm long, ISI marked as specified and directed.

S & F in repair 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

M & L for repair to door shutter of bed side locker steel by denting etc and necessary adjustment as required complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of seat and back of chair revolving steel with arms hydraulic with foam cusihion, 50mm thick of size 480mmx470mm covered with tapestry cloth as per sample approved complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of hydraulic system of chair revolving steel with arms hydraulic complete as per the existing specifications complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of wheel of chair revolving steel any type complete as per the existing specifications complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for complete removal of existing painting of chair revolving steel any type by scrapping out and Preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

M & L for replacement of arm (best quality) of chair revolving steel any type as per existing size and specifications complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for repair to various items of steel furniture by running welding at damaged joints etc of legs/stiffner etc n.exc 6mm thick of metal to be welded complete all as shown on drawing and as specified and directed.

M & L for Removing existing old/unserviceable newar from chair verandah (Seat & Back) and re-weaving with 3mm thick 25mm wide superior quality nylon newar as per the existing pattern complete all as shown on drawing and as specified and directed. (Drg No. FD-19(M)/256

M & L for replacement of glass shutter of book case steel of size 695mmx285mm, 5mm thick complete all as shown on drawing complete all as specified and directed. (Drg No. FD-90(M))

S & F in repair 100 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F in repairs, 50 mm lock with double key for book case steel as per the existing specifications and sample approved complete all as specified and directed. (Drg No. FD-90(M))

M & L for replacement of old damaged seat of chair CB steel without arm with well seasoned secend class hard wood seat frame including canning of seat complete as per Godrej pattern with 2mm wide and 0.4mm thick white plastic cane and fixed to chair with 04 Nos screw with washers of size 75mmx3mm complete all as shown on drawing and as specified and directed. (Drg No. FD-75(M))

All as per serial item No. 19 above but back of chair CB steel without arm complete all as shown on drawing and as specified and directed. (Drg No. FD-75(M))

M & L for replacement of old damaged stiffner of chair CB steel with mild steel flat iron of size 25mmx3mm, 500mm long fixed to frame by welding complete all as shown on drawing and as specified and directed. (Drg No. FD-75(M))

M & L for replacement of seat of chair revolving steel/chair computer with arm/w/o arm non hydraulic with 12mm thick plywood, Grade BWR, commercial type covering with foam cushion of 32 density, 50mm thick of size 450mmx445mm covered with regzin cloth as per sample approved duly stiched complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

All as per serial item No. 22 above but for back of size 510mmx430mm of chair revolving steel/chair computer with arm/w/o arm non hydraulic complete all as specified and directed. (Drg No. TP)

M & L for replacement of existing broken /unserviceable top of Table 3'x2' steel with/without drawer with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-1008)

M & L for replacement of existing broken /unserviceable leg of Table 3'x2' steel with/without drawer with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-1007/1008)

All as per serial item No. 25 above but for replacement of stiffner/short rail of Table 3'x2' steel with/without drawer complete all as specified and directed and as shown on drawing.

All as per serial item No. 25 above but for replacement of centre stiffner/long rail of Table 3'x2' steel with/without drawer complete all as specified and directed and as shown on drawing.

M & L for replacement of existing broken /unserviceable drawer of Table 3'x2' steel with/without drawer made out of 1mm thick MS black sheet including making into shape including necessary welding complete all as specified and directed and as shown on drawing. (Drg No. FD-1007/1008)

M & L for replacement of existing broken /unserviceable top of Table 3'x3' steel with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with 40mm long screw with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-1009)

M & L for replacement of existing broken /unserviceable leg of Table 3'x3' steel with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-1009)

All as per serial item No. 30 above but for replacement of stiffner/side rail of table 3'x3' steel complete all as specified and directed and as shown on drawing.

M & L for replacement of existing broken /unserviceable top of table dining OR's with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with 40mm long screw with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-165(M))

M & L for replacement of existing broken /unserviceable leg of table dinning OR's with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-165(M))

All as per serial item No. 33 above but for replacement of centre stiffner/long rail of table dinning OR's complete all as specified and directed and as shown on drawing. (Drg No. FD-165(M)).

All as per serial item No. 33 above but for replacement of short stiffner/short rail of table dinning OR's complete all as specified and directed and as shown on drawing. (Drg No. FD-165(M))

M & L for replacement of existing broken /unserviceable top of Table office officer steel of size 1680mmx870mm with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-1003)

M & L for replacement of existing broken /unserviceable top of Table office officer steel of size 1800mmx1200mm with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-1003)

M & L for replacement of existing broken /unserviceable drawer of Table office officer steel made out of 1mm thick MS black sheet including making into shape including necessary welding complete all as specified and directed and as shown on drawing. (Drg No. FD-1003)

M & L for replacement of existing broken /unserviceable leg of Table office officer steel with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-1003)

M & L for replacement of existing broken /unserviceable top of Teapoy verandah with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-35/255)

M & L for replacement of existing broken /unserviceable Centre stiffner with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-35/255)

M & L for replacement of existing broken /unserviceable side stiffner with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-35/255)

M & L for replacement of old unserviceable lock of almirah large steel/almirah large steel 1/2Sx1/2H/almirah medium steel with new lock of suitable size provided with duplicate keys as per sample, fixed with screws complete all as shown on drawing and as specified and directed. (Drg No. FD-67(M)/1031/1032/1033)

M & L for replacement of locking device of almirah steel large including lock bar complete all as shown on drawing and as specified and directed. (Drg No. FD-67(M)/1031/1033)

M & L for repair to door shutter of Almirah large steel by denting etc and necessary adjustment as required complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1031/1033)

M & L for replacement of old unserviceable handle of almirah large steel/almirah large steel 1/2Sx1/2H/almirah medium steel/locker steel with new chromium plated brass handle, fixed with screws complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1031/1032/1033/1029)

Taking down old unserviceable legs of almirah large steel and supply and fixing new legs made out of 1 mm thick mild steel black sheet complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1031/1033)

Taking down old unserviceable shelves of almirah large steel and supply and fixing new shelves made out of 1 mm thick mild steel black sheet made to shape complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1031/1033)

Taking down old unserviceable hanging arrangement of almirah large steel 1/2Sx1/2H and supply and fixing new hanging arrangement complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1031/1033)

M & L for replacement of old damaged seat of chair CB steel with arm with well seasoned secend class hard wood seat frame including canning of seat complete as per Godrej pattern with 2mm wide and 0.4mm thick white plastic cane and fixed to chair with 04 Nos screw with washers of size 75mmx3mm complete all as shown on drawing and as specified and directed. (Drg No. FD-75(M))

All as per serial item No. 50 above but back of chair CB steel with arm complete all as shown on drawing and as specified and directed. (Drg No. FD-75(M)).

M & L for replacement of existing broken /unserviceable stiffner of chair CB steel made out of flat iron fillets 25x3mm size, 500mm long fixed to frame by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-75(M))

S & F in repair PVC cap, 20mm dia as per the existing size and specifications complete all as specified and directed.

M & L for replacement of old damaged arm of chair CB steel with arm with well seasoned 1st class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 75(M))

M & L for replacement of existing broken /unserviceable top of Table office clerk steel of size 1370mmx760mm with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-84(M)/1004)

M & L for replacement of existing broken /unserviceable top of Table office clerk steel of size 1160mmx570mm with 18/19 mm thick prelaminated particle board one side teak face other side balancing white fixed with screw of suitable size with frame including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins/screws complete all as specified and directed and as shown on drawing. (Drg No. FD-84(M)/1004)

M & L for replacement of existing broken /unserviceable drawer of Table office clerk steel made out of 1mm thick MS black sheet including making into shape including necessary welding complete all as specified and directed and as shown on drawing. (Drg No. FD-84(M)/1004)

M & L for replacement of existing broken /unserviceable leg of Table office clerk steel with 25mm square tube of wall thickness 1.6mm by welding complete all as specified and directed and as shown on drawing. (Drg No. FD-84(M)/1004)

S & F in repairs, 65mm, lock, 6 lever, brass (best quality) with double lock and double key as per sample approved complete all as specified and directed.

S & F in repair hard rubber shoe as per the existing size and specifications complete all as specified and directed.

Taking down old unserviceable legs of locker steel and supply and fixing new legs made out of 1 mm thick mild steel black sheet complete all as shown on drawing complete all as specified and directed. (Drg No. FD-1029)

M & L for repair to door shutter of Locker steel by denting etc and necessary adjustment as required complete all as shown on drawing complete all as specified and directed. (Drg No. FD-1029)

M & L for repalcement of Mild steel angle iron of size 25x25x5 mm thick, 225 mm long welded to four corners long rail and short rail at corners of Charpoy GI Pipe drilling holes for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

M & L for replacement of mild steel angle iron of size 25x25x5 mm thick, 850 mm long welded to long rail of charpoy GI pipe with Plywood top horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

M & L for replacement of 12mm thick plywood, BWR grade, commercial type conforming to IS-303-1975 of Size 1950mm x 900mm on charpoy GI pipe with plywood top including 4mm thick secend class hardwood beading allround the plywood fixed to charpoy with and including nuts, bolts and GI washers, dia of bolt not less than 8mm complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of long rail of Charpoy GI pipe plywood top made out with 32 mm GI pipe, medium grade including cutting threading etc without damageing other part complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of short rail of Charpoy GI pipe plywood top converted from long rail as obtained from serial item No. 75 above made out with 32 mm GI pipe, medium grade including cutting threading etc without damageing other part complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of Leg of Charpoy GI pipe plywood top converted from Short rail as obtained from serial item No. 76 above made out with 32 mm GI pipe, medium grade including cutting threading etc without damageing other part complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of Wooden plugs of Charpoy GI pipe made of well seasoned1st class hard wood complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of GI Elbow of Charpoy GI pipe, three way, ISI marked, 32 mm dia complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

S & F in replacement of GI check nut of Charpoy GI pipe, ISI marked complete all as shown on drawing complete all as specified and directed. (Drg No. FD-220)

M & L for replacement of PVC seat and back with new PVC Seat and Back of best approved quality complete all as shown on drawing complete all as specified and directed. (Drg No. FD/MAP-II/06)

M & L for replacement of locking device of almirah steel Medium including lock bar complete all as shown on drawing and as specified and directed. (Drg No. FD-67(M)/1032)

M & L for repair to door shutter of Almirah medium steel by denting etc and necessary adjustment as required complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1032)

Taking down old unserviceable legs of almirah medium steel and supply and fixing new legs made out of 1 mm thick mild steel black sheet complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1032)

Taking down old unserviceable shelves of almirah medium steel and supply and fixing new shelves made out of 1 mm thick mild steel black sheet made to shape complete all as shown on drawing complete all as specified and directed. (Drg No. FD-67(M)/1032)

M & L for replacement of Seat of chair Steel padded seat and back with arm with 12mm thick plywood, Grade BWR, commercial type covering with foam cushion of 32 density, 50mm thick of size 440mmx440mm covered with regzin cloth as per sample approved duly stiched complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of Back of chair Steel padded seat and back with arm with 12mm thick plywood, Grade BWR, commercial type covering with foam cushion of 32 density, 50mm thick of size 440mmx240mm covered with regzin cloth as per sample approved duly stiched complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for replacement of arm (best quality) of chair Steel padded seat and back with arm as per existing size and specifications complete all as shown on drawing complete all as specified and directed. (Drg No. TP)

M & L for scrapping out old painted surface (external and internal except newly provided parts) of Almirah Large Steel furniture and applying two coats of synthetic enamel paint over a coat of red oxide primer by spray painting including preparation of surfaces complete including newly provided parts under respective items here-in-before and filling cavities with putty complete all as shown on drawing and directed. (Drg No. FD-67(M)/1031)

All as per serial item No. 80 above but for almirah large steel 1/2Sx1/2H complete all as shown on drawing and directed. (Drg No. FD-67(M)/1033)

All as per serial item No. 80 above but for Almirah medium steel complete all as shown on drawing and directed.(Drg No. FD-67(M)/1032)

All as per serial item No. 80 above but for Locker Steel complete all as shown on drawing and directed. (Drg No. FD-257/1029)

All as per serial item No. 80 above but for Book case steel complete all as shown on drawing and directed. (Drg No. FD-90(M))

All as per serial item No. 80 above but for Table office clerk steel complete all as shown on drawing and directed.(Drg No. FD-1004)

All as per serial item No. 80 above but for Table office officers steel complete all as shown on drawing and directed. (Drg No. FD-1002)

All as per serial item No. 80 above but for Chair CB steel with arm complete all as shown on drawing and directed. (Drg No. FD-75)

All as per serial item No. 80 above but for Chair CB steel without armcomplete all as shown on drawing and directed. (Drg No. FD-75)

All as per serial item No. 80 above but for Trestle store room steel complete all as shown on drawing and directed. (Drg No. FD-87)

All as per serial item No. 80 above but for Chair verandah complete all as shown on drawing and directed. (Drg No. FD-256 & FD-MAP II/06)

All as per serial item No. 80 above but for Table dining OR's complete all as shown on drawing and directed. (Drg No. FD-165)

All as per serial item No. 80 above but for Table 3'x2' with drawer steel complete all as shown on drawing and directed. (Drg No. FD-1008)

All as per serial item No. 80 above but for Table 3'x3' without drawer steel complete all as shown on drawing and directed. (Drg No. FD-1007)

All as per serial item No. 80 above but for Teapoy verandah complete all as shown on drawing and directed. (Drg No. FD-255, 35)

All as per serial item No. 80 above but for Ladder for loft complete all as shown on drawing and directed. (Drg No. FD)

All as per serial item No. 80 above but for Book shelf open large steel complete all as shown on drawing and directed. (Drg No. FD-69(M))

All as per serial item No. 80 above but for Rack steel adjustable of size 3075x900x500/1905x915x305 mm complete all as shown on drawing and directed. (Drg No. FD-84)

All as per serial item No. 80 above but for Rack steel closed type with 6 shelves complete all as shown on drawing and directed. (Drg No. FD-106(M))

All as per serial item No. 80 above but for MNF set for Charpoy GI pipe complete all as shown on drawing and directed. (Drg No. FD-220)

All as per serial item No. 80 above but for box kit steel complete all as shown on drawing and directed. (Drg No. TP)

WOODEN FURNITURE M & L for replacement of back of book case with 6 mm thick plywood, commercial type Grade BWR complete all as shown on drawing and as specified and directed. (Drg No. FD-58, 45(M), 237)

M & L for Repairs to Book case by taking down the existing broken /unserviceable top and bottom and supply and fixing of new top and bottom of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing. (Drg No. FD-58, 45(M), 237)

Supply only high density (32) P.U. foam cushion of size 530mm x 500mm x 100 mm of approve quality and covered with new superior quality tapestry cloth of exactly same size and quality as per existing (Not less than Rs. 250.00 per mtr cost of cloth) and as approved complete all as specified and directed. (Make of Foam cushion : Sleepwell/Century/Kurlon) (Drg No. FD-281/373)

M & L for Repairs to Sofa set by taking down the existing broken /unserviceable wooden front leg and replacing the same with new front leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 281/373)

All as per serial item No. 104 above but rear leg complete all as specified and directed. (Drg No. FD- 281/373)

All as per serial item No. 104 above but Arm rest complete all as specified and directed. (Drg No. FD- 281/373)

All as per serial item No. 104 above but Front and rear rail of seat and back complete all as specified and directed. (Drg No. FD- 281/373)

All as per serial item No. 104 above but side rail of seat and back complete all as specified and directed. (Drg No. FD- 281/373)

All as per serial item No. 104 above but Stiffener of seat and back complete all as specified and directed. (Drg No. FD- 281/373)

M & L for Repairs to Table Centre by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing. (Drg No. FD- 274)

M & L for Repairs to Table Centre by taking down the existing broken /unserviceable wooden Leg and replacing the same with new Leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 274)

All as per serial item No. 111 above but front/back rail complete all as specified and directed.

All as per serial item No. 111 above but side rail complete all as specified and directed.

M & L for Repairs to Teapoy by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing. (Drg No. FD- 232, 278, 382)

M & L for Repairs to Teapoy by taking down the existing broken /unserviceable wooden Leg and replacing the same with new Leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 232, 278, 382)

All as per serial item No. 115 above but front rail complete all as specified and directed.

All as per serial item No. 115 above but side rail complete all as specified and directed.

All as per serial item No. 115 above but stiffener complete all as specified and directed.

M & L for Repairs to Table dining for 06 persons by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing. (Drg No. FD- 30, 273, 376)

M & L for Repairs to Table dining 06 persons by taking down the existing broken /unserviceable wooden long rail and replacing the same with new long rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 30, 273, 376)

M & L for Repairs to Table dining 06 persons by taking down the existing broken /unserviceable wooden short rail and replacing the same with new short rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 30, 273, 376)

M & L for Repairs to Chair Easy by taking down the existing broken /unserviceable wooden front leg and replacing the same with new front leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD-229 )

All as per serial item No. 122 above but rear leg complete all as specified and directed.

All as per serial item No. 122 above but arm rest complete all as specified and directed.

All as per serial item No. 122 above but for fillets for canning of seat as per existing size and shape complete all as specified and directed.

All as per serial item No. 122 above but rail of seat and back complete all as specified and directed.

M & L for Repairs to Chair dinning by taking down the existing broken /unserviceable wooden front leg and replacing the same with new front leg made of well seasoned first class teak wood front after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD-279 & 228 )

All as per serial item No. 127 above but rear leg complete all as specified and directed.

All as per serial item No. 127 above but Back rest complete all as specified and directed.

All as per serial item No. 127 above but Stiffener complete all as specified and directed.

All as per serial item No. 127 above but side rail complete all as specified and directed.

All as per serial item No. 127 above but front rail complete all as specified and directed.

All as per serial item No. 127 above but back rail complete all as specified and directed.

All as per serial item No. 127 above but for fillets for canning of seat as per existing size and shape complete all as specified and directed.

M & L for Repairs to Peg table by taking down the existing broken /unserviceable top and supply and fixing of new top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing. (Drg No. FD- 277, 384)

M & L for Repairs to Peg table by taking down the existing broken /unserviceable wooden Leg and replacing the same with new Leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. (Drg No. FD- 277, 384)

All as per serial item No. 136 above but side/front/back rail complete all as specified and directed.

M & L for Repairs to Trestle store room wooden by taking down the existing broken /unserviceable rail and supply and fixing of new well seasoned second class hard wood (SAL) rail of size 2440x100x100mm complete all as specified and directed and as shown on drawing. (Drg No. FD- 86(M)

M & L for Repairs to Trestle store room wooden by taking down the existing broken /unserviceable leg and supply and fixing of new well seasoned second class hard wood (SAL) leg of size 405x100x100mm complete all as specified and directed and as shown on drawing. (Drg No. FD- 86(M)

M & L for Repairs to Trestle store room wooden by taking down the existing broken /unserviceable stiffener and supply and fixing of new well seasoned second class hard wood (SAL) stiffener of size 1980x175x100mm complete all as specified and directed and as shown on drawing. (Drg No. FD- 86(M)

M & L for preparing surfaces of wood and wood based materials of trestle store room, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed and as shown on drawings. (Drg No. FD-86(M)

M & L for Removing existing old/unserviceable canes from different types of chairs and stool dressing and recaning the same with approved quality plastic cane 2mm wide and 0.40mm thick half round, white with bordering 4mm wide and 0.4mm thick half round plastic cane in godrej pattern as shown on relevant drawings complete all as specified and directed.

M & L for preparation of surfaces by removing old existing fade out polish from chair easy by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish as per manufacturers instruction till glossy finish is achieved complete all as specified and as shown on drawing. (Drg No. FD-17(M), 229)

All as per serial item No. 143 above but for chair dinning complete all as specified and as shown on drawing. (Drg No. FD-228/279)

All as per serial item No. 143 above but for Table Centre complete all as specified and as shown on drawing. (Drg No. FD-29(M), 235, 274)

All as per serial item No. 143 above but for Teapoy complete all as specified and as shown on drawing. (Drg No. FD-34(M), 232, 278)

All as per serial item No. 143 above but for Peg Table complete all as specified and as shown on drawing. (Drg No. FD-25(M), 236, 277)

All as per serial item No. 143 above but for Table dinning 06 person complete all as specified and as shown on drawing. (Drg No. FD-30/273)

All as per serial item No. 143 above but for Book Case complete all as specified and as shown on drawing. (Drg No. FD-237)

All as per serial item No. 143 above but for Sofa Set five seated complete all as specified and as shown on drawing. (Drg No. FD-281)

All as per serial item No. 143 above but for Sofa Set four seated complete all as specified and as shown on drawing. (Drg No. FD-281) Note: An amount of Rs. 21461.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. "

CONSTRUCTION SHELTER

SHRI D P AGARWAL

SHRI PARTHA DUTTA

M/S RELIABLE CONSTRUCTION CO.

M/S DEY ENTERPRISE

M/S. KUMAR CONSTRUCTION CO.

M/S ANIL KUMAR BAUL