SPL REPAIRS TO BLDG NO P 428 MAIN WATER POINT AT RMS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.

Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor, finishing cement concrete surface even and smooth without using extra cement complete all as specifed and directed.

M & L for dark shade/coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

All per item No.8.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4).

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

M&L for mirror polished machine cut kota stone slab 20-25 mm in riser of steps, skirting, dado and pillar , laid over and including 15 mm thick screed bed in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed

S&F Pressed steel door frames of size 105 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow of frame with plain cement concrete (1:3:6) type C-2, (using 40 mm graded stone aggregate) complete all as specified and as directed.

S&F Pressed steel door frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow of frame with plain cement concrete (1:3:6) type C-2, (using 40 mm graded stone aggregate) complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35 mm thick factory made second class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with out sash bar ) edges of framing plain, camferred or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I section 8 clause 8.42(a) supplied and fitted to chowkat complete all as specified and as directed.

Supply and fix factory made flush shutters 35mm thick , solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.

Supply and fix stainless stelel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter complete all as specified and as directed.

M&L for preparation of new painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer on old surfaces complete all as specified and as directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F 200 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed.

S&F 150mm long aluminium alloy handled, fabricated type anodised complete all as specified and as directed.

S&F in repairs150mm long mild steel ordinary rat tail rod pattern springs including roller and roller complete complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of old brick work complete all as specified and as directed

M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed

M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and fair including taking down old plaster from its position complete all as specified and as directed

M&L for Rendering 15mm thick in CM (1:6) on brick work/concrete surfaces finished even and fair without using extra cement including taking down old plaster from its position complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on brick work/concrete surfaces finished even and fair with WPC @ 2% by weight of cement content and without using extra cement including taking down old plaster from its position complete all as specified and as directed. Note:WPC will be measured and paid separately.

M&L RCC nominal mix (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts ,slab and struts complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in roof kerb complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping, back filling, bed plates including necessary formwork complete all as specified.

M&L for cement concrete type C-2 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide that area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed.

S&F Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed.

S&F for providing powder coated sliding type (3 Track +3 shutter) aluminium windows,ventilators excluding frame section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh will be paid seperately etc complete all as specified and as directed.

S&F powder coated Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws complete all as specified and as directed.

S&F powder coated Aluminium deco grills made out of fixed indepently on outside of sliding window system in Aluminium C channel on top & Bottom, wt of aluminium alloy grill not less than 1.5 Kg/m2 complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm complete all as specified and as directed.

S&F steel windows with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary length i.e. Within 20mm of the length indicated conforming to Fe-410-W (Gde E-250 quality -A) complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed.

S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and as directed.

S&F bands, straps or stays , plain angle cleats or flat irons cleats or securing purlins to wooden trusses or rafters, knee pieces and similar small articales etc conformings to Fe-290 Grade E-165 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer on newly prepared steel surface of any description,over 10cm width or girth,not other wise described all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer on old steel surface of any description,over 10cm width or girth,not other wise described all as specified and directed by Engr-in-Charge.

M&L for applying two coats of OBD on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for applying one coat of OBD on old plastered surfaces of walls including preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of Cement based paint on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for applying one coat of cement base paint on old plastered surfaces of walls including preparation of old plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified..

M&L for Preparation of old surfaces and appplying one coat of white wash on ceiling, cornices etc. complete all as specified and directed.

S&F in repairs of 15 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed.

S&F in repairs of 20 mm bore GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed.

Taking down AC/Salt glazed ware pipes and fittings upto 110mm complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repairs/replacement 75mm bore PVC (SWR) floor trap (ISI Marked), outlet with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) and making good the disturbed surface to match with existing complete all as specified and directed.

S&F in repairs 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends complete all as specified and directed.

S&F in repairs/replacement 15mm Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs/replacement for 15mm Stop valves fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make : Essco Cat No 513A/513B or equivalent make as approved by GE.

S&F in repairs/replacement of 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : Essco, Cat No DLX-508 or equivalent approved make

S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed.

Supply and fixing as in replacement 125mm dia brass chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed. Make :- ESSCO Cat No EOS-542A or equivalent make as approved by GE.

S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.

S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.

Supply and fixing in replacement brass chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed. Make : ESSCO Cat No A CN 1111 or equivalent make as approved by GE.

Supply and fixing as in replacement 100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed.

Supply and fixing in repair vitreous china premium/1st quality wash down water closet dual type including flushing cistern & flush pipe and all other necessary accessories like rag bolts/gel gasket complete all as specified and as directed.

Supply and fixing as in repair 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and as directed.

S&F in repairs for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings complete all as specified and as directed.

S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I, including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed.

S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.

Demolition and breaking up drain pipes(salt glazed,stoneware, AC or reinforced concrete) set in cement 'mortar 150 mm dia fixed in position complete all as specified and as directed.

M&L in repair for DWCPE (SN8) 150 mm (ID) diameter pipes laid in trenches complete all as specified and as directed.

S&F 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all as specified and as directed.

M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&Lfor machine pressed precast concrete interlocking paver block of any colour any shape and size confirming to IS 15658-2006 of rubber moulded 80mm thickness, M-40 grade with grey cement and pigment laid over and including 25mm thick sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and as directed.

M&L 40 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slope correction layer over RCC slab finished without using extra cement complete all as specified and as directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and on primed surface including Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m complete all as specified and as directed :- (i) 15mm thick cement plaster in cement mortar 1:4 (ii) Cleaning of plastered roof surface and applying one coat of bituminous primer @ 0.25 litre/Sqm conforming to IS:3384-1986 (iii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.00 Kg/Sqm by torch application method. (iv) Applying a coat of solar reflective bituminous aluminium paint @ 0.11Kg/Sqm over mineral surface.

M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. of suitable size as required at site and 50 mm deep complete all as specified and as directed.

One light point controlled by one, one way switch .

One Exh/Ceiling fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

All as per item No-94.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

S&F Switch piano flush type single pole, one way 5A complete all as specified and as directed.

S&F Socket outlet, 2 in 1, 3 pin 5A flush type complete all as specified and as directed.

S&F Switch socket combination 2 in 1, 5A flush type complete all as specified and as directed.

S&F Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type complete all as specified and as directed.

S&F stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and as directed.

M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including taking down old unsv one complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length

M&L for sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including taking down old unsv one complete all as specified and as directed. NOTE:- two runs of 2.5 Sq mm + one run of 2.5 sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length

S&F LED flood light 120 Watt capacity with high luminious efficiency made up of Epoxy powder coated pressure die cast aluminium housing with elegantly designed heat sink for efficient thermal management, sturdiness and excellent corrosion resistant and lens embedded PC cover having Top Opening seperate driver compartment with IP 66 protection and High quality toughened glass IK07 with 10 KV Built in surge protection device and all connected accessories including suitable size of serive bracket housing nuts and bolts etc and making electrical connection complete all as specified and as directed.

S&F in repairs LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with, including two Nos PVC blocks and connecting up with flexible copper cable flexible pipe from ceiling rose to the light fitting complete all as specified and as directed.

S&F in repairs /replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F in repairs MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

S&F in repairs MCB SPN 40-63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F in repairs MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore complete all as specified and as directed.

M&L for Aluminium strip 25 x3.15 mm with saddles and fixing any height screws etc for roof conductors and sown conductors above ground complete all as specified and as directed.

M&L for Air termination, single pointed aluminium rod 12 mm dia and 300 mm long any height complete all as specified and as directed.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. Head screw complete all as specified and as directed.

M & L for Earthing complete with galvanized steel earth plate 60cm x 60cm x 6mm thick electrode, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 32 x 6mm size up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC (1:3:6) type C-1 pit, 20mm bore dia GI pipe, medium grade pipe for watering arrangement and 40 mm bore dia GI pipe, light grade for protection of earth strip, 50mm thick RCC nominal mix (1:2:4) type B-1 cover reinforced with 8mm dia TMT bars @ 15cm C/C both ways and with handle made out of 10mm dia bars, funnel, wire mesh etc. as shown in electrical Plate No. 03 of SSR Part-I connected to earthing test point including taking down old unserviceable material and testing on completion etc complete all as specified and as directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as require 32x6mm galvanised iron or steel wire complete all as specified and as directed.

M & L for GI pipe 40 mm bore with screwed socket joints, medium grade galvanised with and including all fittings, such as socket, bends, elbows, unions, tees diminishing pieces etc laid in trenches for protection of GI/Aluminium strip and fixing air terminal rod with necessary clamps, nut & bolts, complete all as specified and directed.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternate layer complete all as specified and directed by Engr-in-Charge.

SHRI MADAN SINGH (BID ID -3426347)

SHRI HRIDAY NARAIN GIRI (BID ID -3426559)

KAILASH KUMAR LADHA (BID ID -3427724)

M/S Lucky Builders (BID ID -3428568)

M/S SANGITA TRADERS (BID ID -3429631)

PERFECT BUILDERS AND SUPPLIERS (BID ID -3429683)

MS SADHNA RAHUL (BID ID -3426414)

commercial enterprises (BID ID -3428278)