Spray insulation on turbine cylinders and critical valve and thermal insulation on pipe lines, valves, re-generative equipments etc. along with supply of material during overhauling of Unit 3 of 3x210MW, ATPS, Anpara

Amount

Complete spray insulation and repair of spray insulation on following equipments including supply of self setting cement compound, spray wool alkali silicate binder retainers, M. S. Plate, aluminum shields, S.S. and G.I. wire nettings, removal of old and damaged insulation re-fixing of end shields plastering and finishing as per BHEL norms and specifications. 1. Damage H. P. casing 324 to 360mm insulation thickness. 2. Damage I. P. casing 180 to 270mm insulation thickness. 3. Emergency stop valve and H.P. Control valves 270mm thickness. 4. Interrupter valves and I. P. control Valves 270mm thickness insulation. 5. L. P. Bypass stop and control valves 270mm Insulation thickness. All the above equipments including their end shield on front and rear sides.

Supply and application of thermal insulation on critical steam pipes such as main steam hot reheat, cold reheat, cross around and feed cycles pipes etc. including fixing and fitting of protective covering insulation thickness 50mm silicate and 100mm mineral wool or by 180mm thickness of lightly resin bonded mineral/ rock wool and sheeting’s

ISOLLOYD ENGINEERING TECHNOLOGIES LTD

M/S ANJALI ENGINEERING WORKS