03 Providing internal Amenities for DY President Nivas Z.P. Sangli

Wall Paneling Providing & fixing wall paneling in 19 Millimetre and 6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides, with approved shade as per detailed drawing & design.SS hinges,SS handles, TW lipping etc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge)

Storage Providing & fixing Storage using 19 Millimetre thick BWR plywood IS 303 standards empowered with antitermite anti fungus chemical Plywood for structure 6 mm Plywood for back. 25 mm thick block board full pine BWP Door should finish with handles 12" stainless steel & mortice locking arrangement. All exterior surfaces should finished with 1.00 Millimetre laminate and internaly finished with 1mm thk. white laminate storage should have handles locking arrangement etc. complete as per detailed drawing and design. (Depth of storage 0.45 meter). with all necesaary fixtures and fastenings etc complete. (Before execution sample should be get approved from Engineer In charge)

Providing and fixing single bed of size 2025 milimetre long X 1000 milimetre wide X 650 milimetre deep with matress and pillow. Understructure - The legs are made of square tube of size 25 milimetre X 25 milimetre made out of mild steel sheet with a thickness of 1.2 milimetre. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2 milimetre thick cold rolled close annealed sheet having a L shaped structure to join the side panels and headboard to the leg.

Providing and fixing sofa set 3+1+1 brown and cream leather Dimensions - length 182.5 centimetre, breadth 100 centimetre, height 100 centimetre, weight - 66 kg. Seating capacity - five seat.

Providing and fixing of tea table 900 milimetre X 750 milimetre X 450 milimetre with 12 milimetre thick colour eitched tempered glass with bevelled drawing made out of 18 milimetre thick waterproof ply. The outer laces to be finished with high quality 4 milimetre thick veneer or 1 milimetre thick mica, excetra

Dinning Table - Providing & supplying teak wood Dining table with 6 chairs having top of size 6ft x 3ft. Top should finished with 1mm laminate. Chairs should have round back and cusion for seat.Rate Rate Approved by T.C.P.C.Satara WTB.25.

Providing and fixing stainless steel kitchen trolley of overall 26 inch height and 22 inch depth, supported on aluminium pipes, trolley basket made out of 5 milimetre stainless steel rod fitted on telescopic channel of size 1.5 inch X 20 inch X 22 inch on both sides of trolley of 12 inch or above size, panel having 40 kilogram load bearing capacity of trolley made out of 20 milimetre polyvinyl chloride coated plywood and colour combination as directed by Engineer in-charge. Inner side of panel covered by white mica, 100 milimetre stainless steel decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer in-charge).

Public Seating Chair 3 Seater Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Providing and fixing frame work of galvanised iron for suspended false ceilling which includes galvanised iron perimetre channels of size 27 milimetre and 0.5 milimetre thick having one flange of 20 milimetre and another flange of 30 milimetre along with perimetre of the celling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvanised iron intermediate channels of size 45 milimetre and 0.9 milimetre thick with two flanges of 15 milimetre each from the soffit at 1200 milimetre centres with steel galvanised iron hanger of width 25 milimetre X 0.5 milimetre fasteners, celling section of 0.5 milimetre thickness having curved wedge of 51.5 milimetre and two flanges of 26 milimetre each with lips of 10.5 milimetre fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel 450 milimetre centres, 12.5 milimetre dry wall screws at 230 milimetre centres, fixing screws mechanically either with screw driver or drilling machine with suitable attachment, excetra complete. (For Ground Floor)

Providing and fixing false ceilling of 10 milimetre to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding, if necessary, all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards, excetra complete. (excluding frame work, runners and mild steel supenders). (For Ground Floor)

Only Shutters (0.90 x 2.17) Providing & fixing Shutters for existing in-built storage made in 19+19 Millimetre ply frame work, 19+6 Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides with approved shade using necessary hardware teak wood lipping and etc. as per detailed drawing & design.SS hinges,SS handles, TW lipping etc. complete. As per detailed drawing and design.Plywood - BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge)

Please Enable Macros to View BoQ information