PROVISION OF STAINLESS STEEL SINK IN JCOS OR FAFA ACCN AT JOGINDER SINGH LINE PROVN OF TOILET BATH BLOCK AT SINGLE LIVING JCO S ACCN OF ENGR REGT AND PROVN OF ONE TOILET BLOCK AND SEPTIC TANK OF ENG REGT UNDER AGE BR II AGE EM I OF GE NORTH MRT CANTT

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for Earth filling (for site development) incl raising (or lowering) not exc. 1.5m hight earth spreading in layers n.exc 30cm thick watering and rolling and finishing to reqd size and shape etc (earth to be obtained from out side MD land land exc 5 Km n.exc 10 Km) incl rough excavation complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

M &L for half Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

M&L for providing 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 (using 12.5mm graded crushed stone aggregates) and mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. Note :- Water proofing compound will be measured & paid separetly as supply only.

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 27 here-in-before but 6mm dia to 8mm dia

All as per Srl item No 27 here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers / binders.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

M&L for preparing ,cleaning new concrete/plastered surface providing 10mm thick bedding layer of cement mortar 1:3 mixed with water proofing compound and applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11 sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over including 15mm thick screed bed in CM (1:6) complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry laid over including 10mm thick bedding layers in CM (1:4) complete all as specified and and directed

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick (10 + 5) first coat 10mm and IInd coat 5mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces over a coat of primer complete all as specified and direcrted.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplied & fixed stop valves, 20 mm bore dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed CP soap dish make-Jaquar cat part No-1131 complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed 110 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm dia branch piece,single(single 'Y') equal or unequal complete all as specified and directed directed

Supplied and fixed UPVC (SWR) vent Cowl 75 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement complete all as specified and directed

Supplied and fixed PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

Supplied and fixed vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed.

Supply and fixing vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusiveof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

Supply and fixing PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Supplied and fixed vitteous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device complete all as specified and directed.

Construction of septic tank for 50 users without sludge chamber including necessary earth work as shown on drg No TD-217 sheet 1/7 to 7/7 .complete all as specified and directed.

M&L for construction of sock well 1.8 m. dia & 6 m. depth ( effective depth 4.5 m. ) all as including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-309 Sh. 1/4 to 4/4 complete all as specified and directed.

M&L for concrete bed in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

S&F sink without drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for 16-18 mm thick prepolished green marble stone (udaypur green) (Single piece) as on cooking plateform, step's treads and similar works laid & jointed with cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the edges complete all as specified and directed. Note:- Rate is demmed to be included for making hole for gas pipe and chamfering and nosing etc on exposed surfeces, including cutting the stone for fixing the kitchen sink.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc.all as specifiedand as directed for :- (a) One light point controlled by one way switch.

Point wiring complete with two runs of 2.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 2.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc.all as specifiedand as directed for :- (a) one socket outlet 15/16 Amps on the Independent board.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 15Amps complete all as specified and as directed.

M&L for socket outlet 3 pin single pole, one way 15Amps complete all as specified and as directed.

M&L for Ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.

M&L for Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings including LED lamp 15W complete all as specified and as directed.

S&F LED fluorescent tube light fitting 24 W, integrated LED batten in extruded aluminium housing with diffuser, bipin holders, connector block, etc. and all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed

M&L Sheet metal enclosure for DB's with IP 43- IK 09 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volts SPN 8 way, with metal double door complete all as specified and directed

Supply and fixing Isolator DP, AC, 240 volts of 40 Amps, 1 module, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 32 Amps, 1 module, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed.

S&F LED 20 watt mirror light wall mounted type with fitting watt pre-wired and including connecting up with twin core twisted flexible copper conductor cable with complete all as specified and directed

S&F Exhaust fan AC single phase 230/240 volt of size 300 mm sweep Heavy duty with self opening louvers and shutters including M&L for providing cutting round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI strip 24 x 4mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 40mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate and GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 8mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion including making connection with 24 x 4mm strip from pit to main switch board etc complete all as specified and directed. Note:- (i) After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt. (ii) GI protection pipe along with GI strip up to the length of 7.5 mtr shall be demmed to be included under this item.

S&F LED street light luminaries in a single pipe deep drawn aluminium housing anodised inside and acrylic cover complete with 20 watt minimum 100 lumens per watt in built control gear including up to 2.5 mtr twin core aluminium conductor for connector of street light fitting from LT OH line/ceiling rose.and street light bracket made out of 25 mm dia GI pipe Medium grade 0.90 mtr long band to shape 120 degree angle fixed to pole/wall/ceiling by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge.

S&F water heater storage type electric supply and installed of capacity 25 ltr BEE 5 Star rating complete all as specified and directed

Supply and fixed gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and Replace LT under ground XLPE insulated armoured heavy duty and PVC sheathed aluminium stranded conductor cable 1100 V grade (for laid in the ducts, fixed on wall, roofs and trusses with clips including necessary accessories like copper lugs, cable entry glands, suitable size of bolts / nuts / washers etc) complete of size 16 Sqmm 2 Core and .

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

Material and labour for fly ash 'B' bricks, dry, well brunt bricks laid in trenches for cable protection all as specified.

Supply and fixed gun metal globe valves or gate 25 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Material and labour for 15mm bore straight plain brass ferrules (or connecting screws) screwed both endsand fixed complete all as specified and directed.

Supplied and fixed GI water tubing 25 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F 40mm dia steel tubing light grade in protection of cable at road crossing / hard standing / pole proteciton fixed with clamp as per site requirement complete all as specified and directed

M/S AMAR ELEKTRO CENTRE

mohanlal gupta

Arun Construction Co.

m/s gupta construction

Tridev Construction Company