Tender ID

Karnataka

Active

Works

Buildings

Repairs of Maintenance of Zilla Panchayat Group A Staff Quatress in Koppal,REPAIRS OF TOILET AND FLOOR REPAIRS AT GURANTEE SCHEME MEMBER ROOM AT KOPPAL ZILLA PANCHAYAT,RENOVATION OF NRLM (SANJIVINI) DIVISION IN KOPPAL ZILLA PANCHAYAT,ELECTRIFICATION WORK AT GROUND IN CEO ZILLA PANCHAYAT QUATRESS KOPPAL,Repairs of Maintenance of Zilla Panchayat Group C Staff Quatress in Koppal AND RENOVATION WORK OF CHIEF ACCOUNT OFFICER OFFICE

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹37.6 LCloses: 19 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026

Tender Value

₹37.6 L

EMD Value

₹97,000

Closing Date

19 Nov 2026, 4:30 pm6d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION KOPPAL

Office Number

Work Description

Repairs of Maintenance of Zilla Panchayat Group A Staff Quatress in Koppal,REPAIRS OF TOILET AND FLOOR REPAIRS AT GURANTEE SCHEME MEMBER ROOM AT KOPPAL ZILLA PANCHAYAT,RENOVATION OF NRLM (SANJIVINI) DIVISION IN KOPPAL ZILLA PANCHAYAT,ELECTRIFICATION WORK AT GROUND IN CEO ZILLA PANCHAYAT QUATRESS KOPPAL,Repairs of Maintenance of Zilla Panchayat Group C Staff Quatress in Koppal AND RENOVATION WORK OF CHIEF ACCOUNT OFFICER OFFICE

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT30705

Reference Number

RDPR/2026-27/BD/WORK_INDENT30705

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Koppal

Source Website

Subscribe to view

Documents Required

14 documents required · 10 mandatory · 4 optional

Technical Bid

OptionalAnnual Turnover Certificate

OptionalCompany Registration Certificate

OptionalReserved Category Certificate

OptionalSmall Scale Industries Certificate

RequiredPRED/PWD Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate.

RequiredWork done certificate for Similar nature of Work from Competent authority Rank of Executive Engineer & above

RequiredWork orders /commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredAnnual Turnover Certificate for at least last five years

RequiredUDIN is Preferred

RequiredTenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

RequiredBidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

RequiredOngoing works Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped NIL declaration shall result in disqualification

RequiredSIMILAR NATURE OF WORKDONE FIFTY PERCENTAGE 2021-22 to 2025-26 with Indent Number Compulsory Otherwise Tender will cancelled

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Tenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/BG/SD/Pledge on the name of EE PRED Koppal within 15 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24,2024-25, & 2025-26 achieved in One financial year should be more than financial turnover of Rs. 37.61 Lakhs (in all classes of civil engineering construction works only)

The Tenderer shall obtain Similar Nature of Work done certificate will be Considered financial years of 2021-22 to 2025-26 (50% of the Amount Put to Tender) i.e Rs.18.81 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

THIS WORK IS RANDOMISED AS OTHER WORK.

Single Tender Will Not Be Accepted

Bidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

Ongoing works: Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped. NIL declaration shall result in disqualification.

Working methodology: Before finalising L1, the bidder shall submit a work methodology & resource plan for department of screutiny & approval.

Since the proposed work is lapsable grant head and treasury will closed in february hence the work should be completed before 15th January 2027 if any delay department will not be held responsible.

Since the responsibility of Department is more in the lapsable grant work, Hence any objection and court matters will not be entertaineD

Fee & Financial Details

Tender Fee Amount

₹950

EMD Fee Amount

₹97,000

Important Dates

Last Activity

12 Nov 2026

Published

12 Nov 2026

Download Ends

16 Nov 2026

BOQ Preview

•

Repairs of Maintenance of Zilla Panchayat Group A Staff Quatress in Koppal

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 200x10mm

•

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles75 mm with plate 125x32 mm

•

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²)

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Repairs of Maintenance of Zilla Panchayat Group C Staff Quatress in Koppal

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²)

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

supply and Installation of Multicell Standing Seam polycarbonate panels having flux 7.0 as per EN 16153 & EN ISO 10077-2. For min joints, panel shall be 1000 - 1200 mm wide with standing seam on both...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Galavanised Wire Mesh of Average width of Aperure 1.4 mm and Nominal dia of Wire 0.63 mm

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of

•

BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984

•

with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

•

Fabricating, supplying and erection of . ms long hot dip Galvanized

•

Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate

•

for shaft, IS 2062 for base plate with door opening arrangements,

•

Supplying and fixing of solar Lux level street light control switch

•

single phase including suitable capacity contactor.5 kW

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing

•

body for optimal thermal dissipation. Lamp compartment comprising of anti

•

glare clear diffuser with Injection moulded polyc...

•

RENOVATION WORK OF CHIEF ACCOUNT OFFICER OFFICE

•

Making the opening in brick masonry for door/window/clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complet...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at require...

•

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...

•

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...

•

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supply of round/square recess/surface mounted rolling type

•

LED Down light with . W GU 10 LED Lamp Rib Fabricated

•

from diecast aluminium with white powder coated prewired to

•

mains connector & has swive...

•

Supplying of . TR Invertor type split Air conditioners suitable for

•

operation on A/C supply single phase 50 Hz 230 V with hermetically

•

sealed inverter compressor with air cooled condenser, latest R410...

•

Installation charges for 1 to 2 Ton capacity window type Air

•

Conditioner with 50 x 75mm thick teak wood frame of suitable size

•

and allied works complete.

•

Supply of Office Table 1370 mm W x 690 mm (D) x 740 mm (H) Two sets of storage units featuring a 3 drawer unit 1 Box unit and 1 File drawer unit Ideal for Executives and Managers Spacious table with d...

•

Supply of Executive Chair with High Back Tilt Mechansim Synchronic tilt mechanism Locking mechanism Multi Position locking Seat depth edjustment Fixed type Revolving Mechanism Designed with 360 degres...

•

Supply of Mid Back Chair with Fixed armrest with Padding Backrest Height (Low back range 200-400 mm Mid Back range 400-700 mm) Mid back Backrest width (Low 400-500 mm mid 550-700 mm High greater than ...

•

REPAIRS OF TOILET AND FLOOR REPAIRS AT GURANTEE SCHEME MEMBER ROOM AT KOPPAL ZILLA PANCHAYAT

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

•

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing & supplying Toilet cleaner of reputed make capable of killing bacteria, germs as per direction of Engineer in charge of work

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25...

•

RENOVATION OF NRLM (SANJIVINI) DIVISION IN KOPPAL ZILLA PANCHAYAT

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing & Fixing in position Acoustical wall panelling with Integral Densified Square/Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels/tiles with fabricated galv...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

•

Supplying of . TR Invertor type split Air conditioners suitable for

•

operation on A/C supply single phase 50 Hz 230 V with hermetically

•

sealed inverter compressor with air cooled condenser, latest R410...

•

Installation charges for split type air conditioner with allied works for

•

one indoor and one outdoor unit is to be mounted on suitable Angle

•

Iron support upto 3.0 Ton split/cassette type A/C

•

Free STanding Table for Cabin: Providing and Fixing Free Standing Table for cabin Without frames consisting of 25 mm thick PLPB table top 25 mm thick PLPB with edge bomed end table 18 mm thick PLPB wi...

•

Storage Unit Wooden One Side Laminate Providing and Fixing woode storage unit one side laminate 18 mm PLY PLPB with edge bound for body 18 mm with openable shutters and indivbidual locking system for ...

•

ELECTRIFICATION WORK AT GROUND IN CEO ZILLA PANCHAYAT QUATRESS KOPPAL

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with

•

electrolytic grade flexible copper with low conductor confirming to

•

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supplying & fixing of retrofit type LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance t...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing

•

body for optimal thermal dissipation. Lamp compartment comprising of anti

•

glare clear diffuser with Injection moulded polyca...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 1 OTHERS.docx

Tender Document • 0.09 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Active

Works

Buildings

Repairs of Maintenance of Zilla Panchayat Group A Staff Quatress in Koppal,REPAIRS OF TOILET AND FLOOR REPAIRS AT GURANTEE SCHEME MEMBER ROOM AT KOPPAL ZILLA PANCHAYAT,RENOVATION OF NRLM (SANJIVINI) DIVISION IN KOPPAL ZILLA PANCHAYAT,ELECTRIFICATION WORK AT GROUND IN CEO ZILLA PANCHAYAT QUATRESS KOPPAL,Repairs of Maintenance of Zilla Panchayat Group C Staff Quatress in Koppal AND RENOVATION WORK OF CHIEF ACCOUNT OFFICER OFFICE

Rural Development and Panchayat Raj Department

RDPR Division Office Koppal | Koppal, Karnataka

Amount: ₹37.6 LCloses: 19 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Nov 2026
Closes19 Nov 2026

Tender Value

₹37.6 L

EMD Value

₹97,000

Closing Date

19 Nov 2026, 4:30 pm6d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRE DIVISION KOPPAL

Office Number

Work Description

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT30705

Reference Number

RDPR/2026-27/BD/WORK_INDENT30705

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Koppal

Source Website

Subscribe to view

Documents Required

14 documents required · 10 mandatory · 4 optional

Technical Bid

OptionalAnnual Turnover Certificate

OptionalCompany Registration Certificate

OptionalReserved Category Certificate

OptionalSmall Scale Industries Certificate

RequiredPRED/PWD Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate.

RequiredWork done certificate for Similar nature of Work from Competent authority Rank of Executive Engineer & above

RequiredWork orders /commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredAnnual Turnover Certificate for at least last five years

RequiredUDIN is Preferred

RequiredTenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

RequiredBidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

RequiredOngoing works Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped NIL declaration shall result in disqualification

RequiredSIMILAR NATURE OF WORKDONE FIFTY PERCENTAGE 2021-22 to 2025-26 with Indent Number Compulsory Otherwise Tender will cancelled

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Tenderer must mandatorily submit his present accurate postal address and phone number in a signed letterhead.

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

THIS WORK IS RANDOMISED AS OTHER WORK.

Single Tender Will Not Be Accepted

Bidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

Ongoing works: Bidder shall compulsorily submit details of all PHYSICAL ONGOING WORKS on their official letterhead, duly signed & stamped. NIL declaration shall result in disqualification.

Working methodology: Before finalising L1, the bidder shall submit a work methodology & resource plan for department of screutiny & approval.

Since the proposed work is lapsable grant head and treasury will closed in february hence the work should be completed before 15th January 2027 if any delay department will not be held responsible.

Since the responsibility of Department is more in the lapsable grant work, Hence any objection and court matters will not be entertaineD

Fee & Financial Details

Tender Fee Amount

₹950

EMD Fee Amount

₹97,000

Important Dates

Last Activity

12 Nov 2026

Published

12 Nov 2026

Download Ends

16 Nov 2026

BOQ Preview

•

Repairs of Maintenance of Zilla Panchayat Group A Staff Quatress in Koppal

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 200x10mm

•

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles75 mm with plate 125x32 mm

•

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²)

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

•

Repairs of Maintenance of Zilla Panchayat Group C Staff Quatress in Koppal

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²)

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Galavanised Wire Mesh of Average width of Aperure 1.4 mm and Nominal dia of Wire 0.63 mm

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of

•

BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984

•

with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

•

Fabricating, supplying and erection of . ms long hot dip Galvanized

•

Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate

•

for shaft, IS 2062 for base plate with door opening arrangements,

•

Supplying and fixing of solar Lux level street light control switch

•

single phase including suitable capacity contactor.5 kW

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing

•

body for optimal thermal dissipation. Lamp compartment comprising of anti

•

glare clear diffuser with Injection moulded polyc...

•

RENOVATION WORK OF CHIEF ACCOUNT OFFICER OFFICE

•

Making the opening in brick masonry for door/window/clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complet...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at require...

•

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...

•

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supply of round/square recess/surface mounted rolling type

•

LED Down light with . W GU 10 LED Lamp Rib Fabricated

•

from diecast aluminium with white powder coated prewired to

•

mains connector & has swive...

•

Supplying of . TR Invertor type split Air conditioners suitable for

•

operation on A/C supply single phase 50 Hz 230 V with hermetically

•

sealed inverter compressor with air cooled condenser, latest R410...

•

Installation charges for 1 to 2 Ton capacity window type Air

•

Conditioner with 50 x 75mm thick teak wood frame of suitable size

•

and allied works complete.

•

REPAIRS OF TOILET AND FLOOR REPAIRS AT GURANTEE SCHEME MEMBER ROOM AT KOPPAL ZILLA PANCHAYAT

•

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing & supplying Toilet cleaner of reputed make capable of killing bacteria, germs as per direction of Engineer in charge of work

•

RENOVATION OF NRLM (SANJIVINI) DIVISION IN KOPPAL ZILLA PANCHAYAT

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing & Fixing in position Acoustical wall panelling with Integral Densified Square/Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels/tiles with fabricated galv...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supplying of . TR Invertor type split Air conditioners suitable for

•

operation on A/C supply single phase 50 Hz 230 V with hermetically

•

sealed inverter compressor with air cooled condenser, latest R410...

•

Installation charges for split type air conditioner with allied works for

•

one indoor and one outdoor unit is to be mounted on suitable Angle

•

Iron support upto 3.0 Ton split/cassette type A/C

•

ELECTRIFICATION WORK AT GROUND IN CEO ZILLA PANCHAYAT QUATRESS KOPPAL

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated

•

1100V grade, multistrand copper wire with low conductor resistance

•

single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with

•

electrolytic grade flexible copper with low conductor confirming to

•

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing

•

body for optimal thermal dissipation. Lamp compartment comprising of anti

•

glare clear diffuser with Injection moulded polyca...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 1 OTHERS.docx

Tender Document • 0.09 MB

Ready to Participate?

Download all tender documents and submit your bid