Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
30 Nov 2026, 3:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GC (MMG)
C-56/1, ANUSANDHAN BHAWAN, SECTOR 62, NOIDA
renovation of toilets in anusandhan bhawan
2026_DIT_932810_1
70(5)/2026-MMG
Open Tender
Civil Works - Buildings
Works
180 days
CDAC, NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹2.5 L
Yes
11 Nov 2026
11 Nov 2026
1 Dec 2026
11 Nov 2026
30 Nov 2026
19 Nov 2026
180 days
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1GENERAL 1. Technical specifications and mode of measurements for the work shall confirm to relevant IS Codes. 2. All the personnel / workers including their Supervisors shall maintain very good behavior and discipline while working within the office premises. 3. The Contractor shall remove all the debris resulting from the work and dispose it off outside the Complex area. 4. The contractor shall take utmost care to prevent any damage to building structure, in case of any damage, the contractor shall be STRICTLY liable to make good the cost of such damages. 5. All items of work contracted for shall be executed strictly in accordance with the description of the item in the Bill of Material; specifications read in conjunction with the appropriate Indian Standard specifications and conditions of the contract and established Engineering practices. | |||||
| 2CARRIAGE OF MATERIALS | |||||
| 2.1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. | 90 | Cum | - | - |
| 3BRICK WORK | |||||
| 3.1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
1. Brick Quality: Use bricks with compressive strength and soak them in water for 10–15 minutes before laying to prevent absorption of water from the mortar. 2. Mortar Mix & Application: Use a 1:4 cement-sand ratio. Ensure all vertical and horizontal joints are filled completely, with a maximum joint thickness of 10–12 mm.
3. Bond & Alignment: Use English Bond (alternating headers and stretchers) for maximum strength. Ensure a fair-face finish on both sides, with true and plumb vertical alignment.
4. Construction Height: Do not raise walls more than 1.5 meters per day to prevent sagging and mortar deformation.
5. Curing: Cure the brickwork for at least 7-10 days to ensure proper strength gain.
6. Scaffolding: Use robust double scaffolding that does not restrict the alignment or quality of the brickwork. | 16 | Cum | - | - |
| 3.2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level:
1. Brick Selection & Preparation: Use high-quality, fully burnt bricks. Soak them in water for at least 1–2 hours before use to prevent them from absorbing water from the mortar.
2. Mortar Mix & Joints: Use a 1:4 cement-sand mix. Keep vertical and horizontal joints between 10mm and 12mm thick to ensure stability.
3. Reinforcement: To prevent cracking, insert reinforcing materials such as 6mm or 8mm diameter mild steel bars, hoop iron, or expanded mesh every third or fourth course, properly anchored into the main structure.
4. Structural Stability (115 mm Walls):
4a. Max Height: Raise the wall no more than 1.5 meters per day to prevent buckling.
4b. Structural Connection: Install concrete stiffener columns (tie-columns) at intervals, usually every 2.5 meters or at corners, to provide lateral stability.
4c. Raking Joints: Rake the mortar joints to a depth of 10-12 mm while the mortar is still green to ensure good adhesion for plastering.
5. Quality Control: Ensure the wall is perfectly vertical by checking with a plumb bob, spirit level, and string line at every stage.
6. Curing: Start curing 24 hours after construction and continue for at least 7 days, twice daily, to achieve proper strength.
7. Foundation/Base: Ensure the first layer is laid on a solid RCC surface (like a plinth beam) and use cement paste for a strong bond. 8. Scaffolding: Use robust double scaffolding that does not restrict the alignment or quality of the brickwork. | 163 | Sqm | - | - |
| 3.3 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 163 | Sqm | - | - |
| 4Stone Work | |||||
| 4.1 | Providing and fixing 18 mm thick gang saw cut, Granite stone mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab all colour and texture except black, Cherry/Ruby red Area of slab upto 0.50 sqm | 21 | Sqm | - | - |
| 4.2 | Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work | 15 | Meter | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.06 MB
TENDER.pdf
Tender Documents • 7.04 MB
BOQ_980266.xls
BOQ • 0.62 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .