Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.7 L
EMD Value
₹13,400
Closing Date
26 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER-IV
UDA Office Udaipur
Renovation and Modernization Works at Government Girls Senior Secondary School, Jagdish Chowk, Udaipur (DMFT) 5006
2026_UITUD_603428_1
NIT_50_06
Open Tender
Civil Works
Percentage
180 days
Udaipur
Please Refer Tender Document
2 documents required · 2 mandatory
₹590
Refer Tender Document
₹13,400
Yes
7 Oct 2026
7 Oct 2026
27 Oct 2026
7 Oct 2026
26 Oct 2026
7 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Item Code [11.19.2 bSR2022]:Item Type [building] :: Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.For area of each slab from 2001 to 5000 Sqcm | 5.6 | Sqm | 1,002 | ₹5,611.2 |
| 2 | Item Code [2022 1.13]:Item Type [building] :: P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. | 1 | Each | 12,114 | ₹12,114 |
| 3 | Item Code [2022 10.35.4]:Item Type [building] :: Providing and fixing tiled false ceiling of approved materials of size 595X595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams per sqm both side
inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24X38 mm made from 0.30 mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm and size 24X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-incharge. Providing Solid PVC false Ceiling consisting of 600mm x 600mm, 5mm (±0.25) thick Plain embossed PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1 inch x1 inch( 25x25mm, 19 gauge or 1mm thick ) in square pattern of grid sizes of 2 inchx2 inch( 600x600mm ). The aluminum framework is supported from the ceiling with the help of J hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1 inchx1 inch ( 25x25mm
) angles etc. Complete as per direction of Engineer-In-charge, manufacturers specification & drawing. | 13 | Sqm | 1,550 | ₹20,150 |
| 4 | Item Code [2022 11.18.2]:Item Type [building] :: Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm | 6 | Sqm | 1,023 | ₹6,138 |
| 5 | Item Code [2022 12.2.3]:Item Type [building] :: Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick . | 462.58 | Sqm | 163 | ₹75,400.54 |
| 6 | Item Code [2022 12.22.1 Putty]:Item Type [building] :: Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New Plastered Surface (three or more coats) | 462.58 | Sqm | 84 | ₹38,856.72 |
| 7 | Item Code [2022 12.39]:Item Type [building] :: Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding | 462.58 | Sqm | 14 | ₹6,476.12 |
| 8 | Item Code [2022 12.40.1]:Item Type [building] :: Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect | 462.58 | Sqm | 80 | ₹37,006.4 |
| 9 | Item Code [2022 12.46.1]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coat on new work | 100 | Sqm | 69 | ₹6,900 |
| 10 | Item Code [2022 12.5 celling plaster]:Item Type [building] :: 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- fine sand) | 151.84 | Sqm | 139 | ₹21,105.76 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
General_Conditions2025.pdf
Tender Documents • 1.03 MB
BOQ_1069905.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .