PROVN OF VEHICLE REPAIR SHED, HARD STANDING, CHAIN LINK FENCING AND MISC WORK AT CHUJE GG AND GYANKHAR AREA UNDER GE TAWANG

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out hard/dense soil.

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavation over areas not exc 1.5 m in deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) in hard/dense soil , each post hole not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specifed and as directed

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.

Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface.

Materials and Labour for Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.

Materials and labour for 150 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in hardstanding/ floors/pavings/paths etc. finished the surface of concrete fair and even, complete all as specified and directed.

Materials and labour for 150 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in hardstanding/ floors/pavings/paths etc. finished the surface of concrete even and smooth without using extra cement, complete all as specified and directed.

Materials and labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in hardstanding/ floors,pavings etc. finished the surface of concrete fair and even, complete all as specified and directed.

Materials and labour for 100 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in paths, pavings etc. finished the surface of concrete even and smooth without using extra cement, complete all as specified and directed.

Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub bases of floors, plinth protection,pavings etc. finished the surface of concrete even and smooth without using extra cement, complete all as specified and directed.

Materials & labour for Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping , hooking ends and binding with for fencing work complete all as specified and directed.

Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

Supplyn& fixing Mild steel screw bolt not exc 12 mm dia neck, purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 30 cm long complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

Materials & labour for Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work, steel conforming to Fe- 290 Gde E-165, complete all as specified and directed.

Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed

Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed.

Supplyn& fixing Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc, complete all as specified and directed. (Note :- Each line wire to be measured)

Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.

Materials and labour for forming 12mm thick expansion joints in 150 mm thick concrete slabs, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified and directed.

Materials and labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, in 150 mm thick concrete slabs, filled with sealing compound Grade ‘A’ , complete all as specified and directed.

Materials and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade ‘A’, complete all as specified and directed.

Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping of suitable size on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps

All as per Item No.27 above but for One 2/3 pin socket outlet 5Amps on independent board

All as per Item No.27 above but one switch socket combination 15 Amps on independent board with cable 2x 4 sq mm size and earth wire 4 sqmm

Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps.

Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type.

Supply and fixing Switch socket combination multipurpose 5 A/16 Amps,5 in 1, flush type.

Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed.

Supply and fixing decorative 20 Watt LED lighting fittings, fixed to walls/ceiling, environmental friendly, energy efficient ready to use pack . Make : Crompton. Cat No-CCS-100-20-65-HL2-DP-NWH or equivelent of Bajaj/Philips/ Havells

Supply and fixing street Light fittings 35 watts, pressure die cast housing with integrated lences, high power, IP 66 protection complete all as specified and as directed. Make :Crompton. Cat No- TRP-400-35-57-SL-LM-NSR or equivelent of Bajaj/Philips/ Havells

Supply and fixing house service bracket (hook type) for service connection etc, complete with 3 m long GI pipe, 40 mm bore, medium grade, with two nos bends, MS hook and stay or guy complete all as specified and as directed.

Supply and fixing MCB distrubution board SPN 4 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V complete all as specified and directed by as engineer-in-charge.

Supply and fixing MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series

Supply and fixing MCB Single pole & neutral 240volts 40 Amps, 10KA rupturing capacity, C series

Materials and labour for earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work in any type of soil, disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable XLPE insulated, armoured aluminium conductor of cross sectional area 6 Sqm 2 Core as in sevice connection complete all as specified and directed.

M/S ACE BUILDERS

M/S TSERING DHONDUP

M/S K D CONSTRUCTION

M/S L G BUILDERS

L T CONSTRUCTION

M/S RHEGON CONSTRUCTION

M/S TARAYANA BUILDERS