Construction of Post Metric (SC) Boys Hostel Building in Sandur Town, Sandur Taluk, Ballari District, Under 2515 KKRDB (Micro) for the year 2024-25.

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including cost of all materials, with all lead and lifts, ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including cost of all materials, with all lead and lifts, loading and un-load...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundationsand other similar works etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and wa...

Footing:-Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes mac...

Additionalities for Formwork, Centering & Scaffolding 8% for footings CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading...

Columns-Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes mach...

Additionalities for Formwork, Centering & Scaffolding 70% for Columns CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, l...

Plinth Beam-Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...

Additionalities for Formwork, Centering & Scaffolding 20% for Beam ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all mac...

Additionalities for Formwork, Centering & Scaffolding 10% for Retaining Wall CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading and un-loading cha...

Columns Above Plinth-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upt...

Additionalities for Formwork, Centering & Scaffolding 70% for Columns CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, load...

Beam,Lintel & Roof-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ...

Additionalities for Formwork, Centering & Scaffolding 60% for Beam & Lintel CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading a...

Additionalities for Formwork, Centering & Scaffolding 50 % for Roof slab & Staircase CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading and un-load...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Additionalities for Formwork, Centering & Scaffolding 60% for Beam & Lintel CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading and u...

Shelves-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m heig...

Formwork, Centering & Scaffolding Charges for Roof (Straight & Arched) @ 50%CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading and un-loading charg...

Chejjas-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m heig...

Additionalities for Formwork, Centering & Scaffolding 45% for Chejjas ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 ...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonryincluding rounding off corners wherever required smooth rend...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall including rounding off corners...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied 0.90 ltr/10 m2 over an under coat of primer applied at 0.75 ltr/10 m² of approved brand and manufacture to give...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing edge moulding to 18mm thick Granite stone counters, vanitiesetc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge ---- ...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992with necessary screws etc. complete :125mm ---- including cost of all materials, with all lead and lifts, loading and un-load...

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm ---- including cost of all materials, with all lead and lifts, loading and u...

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barreltype) with necessary screws etc. complete : ---- including cost of all materials, with all lead and lifts, loading and un-...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Columns--Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m h...

Additionalities for Formwork, Centering and Scaffolding 70percent for Columns CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading and un-loading cha...

Beam,Lintel and Roof-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges u...

Additionalities for Formwork, Centering and Scaffolding 60percent for Beam and Lintel CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all le...

Additionalities for Formwork, Centering and Scaffolding 50 percent for Roof slab and Staircase CSR 2023-24 Addendum I P no 111 ---- including cost of all materials, with all lead and lifts, loading a...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Chejjas-Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m he...

Additionalities for Formwork, Centering and Scaffolding 45percent for Chejjas ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charge...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingwelding joints, tying ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid doorwindowClerestory windows and other FramesChowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension...

Providing and fixing factory made 100percent Carpenter friendly ready to use solid plain wood polymer composite (WPC) Flush shutter of 35mm thickness which is anti terminate and having high water abs...

Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with hea...

Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...

Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonryincluding rounding off corners wherever required smooth rend...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall including rounding off corners...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr10 m² over and including priming coat of exterior primer applied @ 2.20 kg10 m²) with paint...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr10 m²) over and including priming coat of exterior primer applied @ 2.20kg10 m² to give an even ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr10 m² over an under coat of primer applied @0.75 ltr10 m² of approved brand and manufacture to give a...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing edge moulding to 18mm thick Granite stone counters, vanitiesetc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge ---- ...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all colours and shade, o...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm ---- including cost of all materials, with all lead and lifts, loading and un-loa...

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm ---- including cost of all materials, with all lead and lifts, loading and u...

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : ---- including cost of all materials, with all lead and lifts, loading and un...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch12.80.1 ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cos...

Providing wall black boards in CM 1:3 with two coats of black paint including finishing etc., including cost of materials, labour, HOM complete as per specifications. ---- including cost of all materi...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Refilling available earth around trenchespipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of...

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 80 mm long, weighing not less than 46 g ---- including cost of all materials, with all lead and lifts, loading ...

Providing and fixing brass stop cock of approved quality : 20mm Dia Nominal Bore ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM char...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 40mm Dia Nominal Bore ---- including cost of all materials, with all lead and lifts, loading and un-loa...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 50mm Dia Nominal Bore ---- including cost of all materials, with all lead and lifts, loading and un-loa...

Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete : 20mm Dia Nominal ---- including cost of all materials, with all lead and lifts, loading ...

Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete : 25mm Dia Nominal ---- including cost of all materials, with all lead and lifts, loading ...

Providing and fixing gun metal non- return valve of approved quality screwed end :25mm Dia Nominal Bore ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, c...

Providing and fixing gun metal non- return valve of approved quality screwed end : 32mm Dia Nominal Bore ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, ...

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore ---- including cost of all materials, with all lead and lifts, loading and un-loading charges...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, ic fixing the pipe with cla...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, ic fixing the pipe with cla...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, ic fixing the pipe with cla...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, including fixing the pipe w...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings, including fixing the pipe w...

Providing and fixing chorinated poly veny chloride CPVC pipes, having therminal stability for hot & cold water supply including all cPVC plain and brass threaded fittings. This includes jointing of p...

Providing and fixing M.S. clamp of required dia to the top of casing housing pipe of tubewell as per IS: 2800 part I, including necessary bolts & nuts of required size complete. ---- including cost ...

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointimg with seal ring conforming to IS: 5382, leaving 10mm gap for termal expansi...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasterin...

Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, clear inside dimension for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar ...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, dan...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, dan...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 630x450 mm ---- including cost of all materials, ...

White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked ---- including cost of all materials, with all lead and ...

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular s...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- including cost of all materials, with all lead and lifts, loading and ...

Nahani Trap 10cms x 10cms ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incidental and equipment charge...

Providing and placing on terraceat all floor levels polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over...

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually cont...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. br...

Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard fl...

INTERNAL ELECTRIFICATION

Supplying heavy gauge PVC conduit pipemm dia mm thick confirming to IS 2509 with suitable size bends,metalPVC junction boxes, adhesive paste etc, and running before concreting the slab The conduit ...

Supplying heavy gauge PVC conduit pipemm dia mm thick confirming to IS 2509 with suitable size bends,metalPVC junction boxes, adhesive paste etc, and running before concreting the slab The conduit ...

Supplying heavy gauge PVC conduit pipemm dia mm thick confirming to IS 2509 with suitable size bends,metalPVC junction boxes, adhesive paste etc, and running before concreting the slab The conduit ...

Supplying heavy gauge PVC conduit pipemm dia mm thick confirming to IS 2509 with suitable size bends,metalPVC junction boxes, adhesive paste etc, and running before concreting the slab The conduit ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc 75x75x65mm ---- including cost...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc100x75x65mm ---- including cost ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc135x75x65 mm ---- including cost...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc180X90X65mm ---- including cost ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc200x90x65mm ---- including cost ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cableconduit entry as required with one coat of primer of approved make etc200x200x65mm ---- including cost...

Supplying and fixing PVCmetal conduit Deep junction box-1920mm Deep Junction Box ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM char...

Supplying and fixing PVCmetal conduit Deep junction box-25mm Deep Junction Box ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charge...

Extra for Groove cutting in brick wallCC floor to the suitable depth for concealing of ConduitGI pipe and plastering, finishing upto wall surface completeupto 50mm Conduit in Brick Walls ---- includi...

Supplying And Fixing Metal Fan Box with Round Hook ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incide...

Point wiring Copper without switchSupplying and wiring adopting loop system in existing PVC Conduit casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated, 2x15 Sqm Cable...

Point wiring Copper without switchSupplying and wiring adopting loop system in existing PVC Conduit casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated, 2x15 Sqm Cable...

Point wiring Copper without switchSupplying and wiring adopting loop system in existing PVC Conduit casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated, 2x15 Sqm Cable...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc, complete on the existing metalPVC b...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A One Way Switch ---- including cost of all materials, with all lead and lift...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6Amps two way Switch ---- including cost of all materials, with all lead and l...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-Stepped Fan Regulator Two Module ---- including cost of all materials, with al...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-16Amps one way switch ---- including cost of all materials, with all lead and ...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-32Amps DP switch ---- including cost of all materials, with all lead and lifts...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-616Amps universal socket ---- including cost of all materials, with all lead a...

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293-TVTelephone socket ---- including cost of all materials, with all lead and lif...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts,50Hz AC supply completely wired on existing box ---- including cost of all materials, w...

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross-3 with Short circuit breaking capac...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross-3 with Short circuit breaking capac...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc, with provision for fixing suitable type capacity MCBs single phase 3 p...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc, with provision for fixing suitable type capacity MCBs single phase 3 p...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolicFRPDMC insulator which are ...

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolicFRPDMC insulator which are m...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with I...

Supplying and fixing Electronic Trivector Meter ETV suitable for operation LT operation and -CT operated meter in polycarbonate body in class 05 accuracy as per IS 14697 and completely wired ---- incl...

Supplying, fixing, wiring, earth electrode for grounding conduits, IC cutouts and other equipments on the meter board using 40mm dia 290mm thick GI pipe 25 mtr long buried in a pit The pit should be ...

Supplying of 11 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 Part-1 or IS-7098 Part-1, Armouring strip thickness in average +5% a...

Labour charges for laying of 11 KV class UG cable in existing trench GI pipe stoneware pipe on wall on pole as required-25 sqmm to 75 sqmm ---- including cost of all materials, with all lead and li...

Earth work excavation for cable trench of 05 to 075 Mtr Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and ...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Epoxy Terminating Kit Pothead suitable for 11 kV, LTUG Cable Up to 4C x 50 Sqmm ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charg...

Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete12 Sweep 300mm ---- including cost of all materials, with all lead and lifts, loadi...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts,50 cycles Single phase AC supply conforming to ISS-3741979 and with double ball b...

Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input: 220-240V 5060Hz Power factor 09...

Supply of roundsquare recesssurface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector has swive...

Supplying and fixing of 5-80 Watts of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply...

Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply exc...

Supplying Fixing of 70-150 Watts lamp holder 2 Pin ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incid...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 2300076 twin twisted PVC insulated wires, requi...

Fixing a ceiling wall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of...

Fixing all types and all capacities of 1x4 2x2 LED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame, using 2300076 twin twisted PVC insulated wires, req...

Fixing all types and all capacities of 1x4 2x2 LED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame, using 2300076 twin twisted PVC insulated wires, req...

Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 05 accuracy with Tape Wound ---- including cost of all materials, with all lead and lifts, loading and un-loading charges...

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete Protection of Overl...

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete Protection of Overl...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440v AC 50 Hz 1224v DC ---- including cost of all materials, with all lead and lifts, loading and un-l...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply Open Execution250A ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, ...

Supply and fixing of 4pole power contactor with NONC contacts on existing woodpanel board using necessary bolts, nuts, washers and wiring etc, complete with AC-3 Rating and as per IS-13947115A ---- ...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF, energy cross-3 with Short circuit breakingcapaci...

Supplying wall mounting fan suitable to operate at singlephase 230v AC supply400mm Sweep ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, ...

Supplying of TR Invertor type split Air conditioners suitable for operation on AC supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A ...

EXTERNAL ELECTRIFICATION

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) asper IS-785 ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, ...

Lightning Arrester as per IEC-60099-4 10 kV, 5 kA Lightning Arrester Polymeric type withGROUND DISCONNECTOR ---- including cost of all materials, with all l...

HG Fuse Unit as per IS-5350 Part-2 11 kV, HG Fuse Unit with Solid Core Insulator ---- including cost of all materials, with all lead and lifts, loading ...

GOS as per IS-9921, IS-1977 11 kV, 200 Amps Single Break GOS ---- including cost of all materials, with all lead and lifts, loading and un-loadi...

DOLO Cutout as per IS-9385, Part-1 to 3 11 kV, DOLO Cutout Conventional to Erstwhile KEBSpecification ---- including cost of all materials, with all lead and lif...

1.1 kV, XLPE or Heat resistant PVCinsulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975 ...

Epoxy Terminating Kit (Pothead) suitablefor 1.1 kV, LTUG Cable 3.5 x 70/95/120 Sqmm ---- including cost of all materials, with all lead...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. 63 A ---- including cost of all materials, with all lead and lifts, lo...

Grounding MaterialPipe GroundingGI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washercomplete Mnimum Weight of GI Pipe: 7.3 Kg ---- including cost of ...

Good Quality well burnt Charcoal for groundingpurposes packed in non returnable gunny bag of 30 Kg each ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, c...

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all mac...

ACSR Conductor as per IS-398 (Part - 2/1996)Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, c...

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric11 kV Ceramic Pin Insulator (Shell only) ---- including cost of all materials, with all lead and lifts, loading and un-...

11 kV GI Pin for 11 kV Ceramic Shell Insulator ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incidental...

DISC Insulator 45 kN Porcelain ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incidental and equipment c...

Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM ---- including cost of all materials, with all lead and lifts, loading...

LABOUR CHARGES Digging of Pit : Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordin...

Digging of Pit for providing GI Pipe type Earthing ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incide...

Concrete worksProviding cement concrete to Poles and Guy sets with material and labour including necessary curing etc., complete (cost doesnot include excavation)a) Pole base for 11/9.5/9/8 Mtr suppor...

Providing Coping for Pole with CC 1:2:4 (As per actuals) a) 150 mm all around the Pole for an height of 300 mm for RCC ---- including cost of all materials, with all lead and lifts, loading and un-lo...

UNDER GROUND SUMP

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. ---- including cost of all materials, with all lead and lifts, loading and un-loading c...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Additionalities for Formwork, Centering & Scaffolding 8% for footings CSR 2023-24 Addendum I P. No- 111 ---- including cost of all materials, with all lead and lifts, loadi...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Shuttering & Centering Charges for earth retaining wall @ 10% (Sl no.12) P.No-115 Vol-1 ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, H...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Formwork, Centering & Scaffolding Charges for Roof (Straight & Arched) @ 50% (Sl no.12) P.No-115 Vol-1 ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, c...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and fixing Factory made single extruded wood polymer composite (wpc) Soild dooe/window, clerestory windows & frames /chowkhat of frames size 65x125mm ---- including cost of all materials, wi...

Providing & fixing factory made 100% Carpenter friendly ready to use solid plain wood polymer composite (WPC) Flush shutter of 35mm thickness which is anti terminate and having high water absorption p...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New errace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

KSRB 12-6.2 : Providing 20mm round M.S footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges...

Mono Block single phase pump ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incidental and equipment cha...

RAIN WATER HARVEST

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointimg with seal ring conforming to IS: 5382, leaving 10mm gap for termal expansi...

Providing and fixing flush systems ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of labour, HOM charges of all machineries, incidental and equipme...

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.100 mm clamp ---- in...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...