CO Veterinary Dispensary at Kot Tehsil Kasauli Distt Solan HP

Amount

Cutting in earth work all kinds of soils and disposal of excavated earth upto a lead of 20 metres such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Excavation in foundation and trenches or drains in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges.

Excavation in foundation trenches etc. in earth work in all kinds of soils such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:4:8 ( one cement isto four sand eight graded crushed hard stone aggregate 40 ( fotrty) millimeters nominal size and curing complete , excluding cost of centering and shuttring and shuttring in foundation and plinth complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying cement concrete 1:6:12 ( One cement :Six sand : Twelve graded crushed hard stone aggregate 40 (forty) millimeters nominal size) mechanically mixed vibrated and curing complete , excluding cost of form work in foundation and plinth complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Centering and shuttering including strutting, propping etc. and removal of form for complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Suspended floor roofs landings, balconies and access platform, flat surfaces etc.

Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like

Edges of slabs and breaks in floors and walls in any width.

Providing mild steel and medium tensile steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness,complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing weep holes in brick masonry/ stone masonry plain reinforced concrete retaining/ breast wall with 100mm dia PVC pipe extending through the full with of the structure with slop of 1 (V):20(H) towards drawing face complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Backfilling behind abutment, wing wall and return wall complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size second class teak wood complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hillock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminum sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing chromium plated brass handles with necessary screws etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 12 thick pre laminated board both side BWP phenal bonded exterior/interior grade panalled shutters with frame of first class deodar wood for door, including bright finished /black enameled iron butt hinges with necessary screws 40 mm thick frame complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows , including ISI marked M.S pressed butt hings bright finished of required size with necessary screws , excluding panelling which will be paid separately ann complete as per direction of Engineer -in -Charge (Note: Butt hings and necessary screws shall be paid separately ) second class teek wood (40 mm thick shutters) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 25x25x5 mm, joints mitered and welded by angle iron 25x25x5 mm or 25x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S Channels door , windows frames manufactured from M.S section ISMC 75x40 mm & MS Flat 75x4 mm as per direction of Engineer -in- Charge and drawing including hinges Jambs bead and if required angle threshold M.S Angle 50x25 mm welded or rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 25 mm and provision of lacking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of surface complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600mm complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600mm complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Precast terrazzo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:4 (1 cement : 4 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of: Medium shades pigment using 50% white cement and 50% ordinary cement complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Precast terrazzo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of: Medium shades pigment using 50% white cement and 50% ordinary cement complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

White glazed tiles 6 mm thick in skirting risers of steps and dedo 12 mm thick cement mortar 1:3 (one cement : 3 sand) and jointed with cement slurry complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing plain multipurpose cement board(High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately) 6 mm thick Cement fiber board as per IS: 14862 complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required.complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

0.63 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

1.60 mm thick with zinc coating not less than 350 gm/m²

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing MS BP sheet 2.00 mm thick in eaves boards in facia /soffits /ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer -in- Charge (Base member of steel work shall be measured & paid separately) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing unplasticised 110 mm -PVC pipe clips of approved design to un plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm cement plaster on the rough side of stone wall of mix in 1:6 (1 cement:6 fine sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm cement plaster on the fair side of stone wall of mix in 1:6 (1 cement:6 fine sand) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (Two Coat) complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Synthetic acrylic washable distemper of approved brand and manufacture to give even shade: New work (two or more coats ) over and including water thin able priming coat with cement primer. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing with stain enamel paint (two or more coats ) at all location prepared and applied as per manufactures specification including appropriate priming coat , preparation of surface etc. complete on steel work complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing under layer for plinth protection of 75( seventy five ) mm thick (unconsolidated) bed dry brick /stone aggregate 40 (forty) mm nominal size well rammed and consolidated and grouted with fine sand including prepration of ground , complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing Course rubble hammer dressed “U” shape open surface drain with side wall 15x22 cm in cement mortar 1:6 ( 1 cement:6 sand ) and inside plastering with cement plaster 1:3 ( 1 cement : 3 sand ) including earth work and laying 10 cm cement concrete in 1:5:10 (1 cement : 5 sand :10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate of 20 mm nominal size ) and finished with a floating coat of neat cementcomplete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC Collar ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and fixing C.I. cover without frame for manholes 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work ,this includes testing of joints and carriage of materials complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm nominal bore

20 mm nominal bore

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work,this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

(iv) 1216 (16 mm OD) pipe

(iii) 1620 (20 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Orissa Pan No. 2004, size 53x41 cm in white shade storage tank IS: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fitting and floors wherever required complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with sit and lid , Green water closet EWC No. 20079 Hindware and its equivalent with sleek plus duel cistern having dual flush system including flush pipe , with manually controlled device (handle lever) conforming to IS:7231 with all fitting and fixtures complete , complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing toilet paper holder CP Brass complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Wash basin No 1008 of size 55x40 cm in white shade of Hindware or its equivalent complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

150 mm dis

110 mm dis

75 mm dis

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore ,this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing masonry Chamber 30x30x50 cm inside, inbrick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5,this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers ,this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., this includes testing of jointscomplete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing white vitreous china flat bck Urinal No. 60002 of size 59x39x37.5 cm white shade of Hindware or its equivalent with white PVC automatic flushing cistern , with fiting standard size C.P. Brass flush pipe, spereaders with unions and clamps (all C.P. brass) with waste fitting as per IS :2556 C.I. trap with outlet grating and other couplings in C.P. brass including painting of fitting and cutting and making good the walls and floors wherever required complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms Kent touchless Sanitiser /Liquid soap Dispenser-1000Ml, white ,this includes testing of jointscomplete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms, this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PTMT stop cock of approved quality and colour 115 mm nominal bore, 86 mm long, weighing not less than 88 gms as directed by the complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore, this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm, this includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :15 mm nominal bore complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia

110mm dia

75 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia

110mm dia

75 mm dia

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

150 mm dia

110mm dia

75 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia

110mm dia

75 mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

75 mm dia

110mm dia

150mm dia

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan ) ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etc. complete 110 mm (one hundred ten mm) dia complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PTMT grating of approved quality for floor , gully or nahani trap complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Electric Gyser of 25 ltrs capacity of approved make and manufature. This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design, this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : This includes testing of joints complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms, this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm , this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore , this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore , this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : this includes testing of joints and complete as per the direction of Engineer in Charge and as per HP, PWD specification, including carriage of all labour equipmens and materials to verious location of site through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm nominal bore

20 mm nominal bore

Niom Infra Private Ltd

suman kumar sharma