Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.2 L+₹25,462 (0.75%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.1 L+₹2.1 L (6.22%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹40.1 L+₹6.1 L (18.0%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
PROVN OF RP POST NEAR MAIN GATE AND CERTAIN OTHER SANCTIONED WORKS AT ADM AREA CPE AND TECH AREA TAKU AT ITARSI UNDER GE BHOPAL
2023_MES_584608_1
8970/E8
Open Tender
Civil Works
Item Rate
183 days
ITARSI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹78,000
Yes
12 May 2023
6 Mar 2023
3 Apr 2023
6 Mar 2023
1 Apr 2023
20 Mar 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 CM deep and getting out in any type of soil complete all as specified and directed.
Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 SQM on plan and n.exc 1.5m in depth and getting out any type of soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exe 25 CM complete all as specified and directed.
Removing excavated material exc 50 M but n exe 250 M and depositing where directed at a level n exe 1.5 M above starting point complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Use and waste of form work to sides of concrete foundation, footing bases of columns, plinth beams and similiar work vertical or to batter for rough finished curved surface complete all as specified and directed.
M&L for RCC (nominal Mix) 1:2:4 type B1 (using 20mm greded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L RCC (Nominal Mix) 1:2:4 type B1 (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts etc complete all as specified.
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
M&L for RCC (Nominal Mix)1:2:4 type B1(using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cill and roof not exceeding 200mm wide and sides of RCC/PCC band in walls (horizontal or slooping and similar work complete all as specified and directed.
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for RCC (Nominal Mix)1:2:4 type B1(using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Mild steel TMT bars of Fe 500, 10 mm dia and over cut to shape required including cranking bending spirally hooping for columns hooking ends and binding with and includuing mild steel wire (anneled) not less than 0.9 mm dia complete all as specified and directed.
M&L for Mild steel TMT bars of Fe500, 5 mm dia and over upto and including 10 mm dia in stirrup spacers and binders, hooking ends and binding with and includuing mild steel wire(anneled) not less than 0.9 mm dia complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for brickwork with sub class ‘B’ bricks, using modular size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces ofbrick or concrete surfaces mixed with water proofing compound as per manufacturer instruction complete all as specified and directed. (Water proofing compound shall be measured and paid for seperately)
Supply only intregal water proofing compound complete all as specified and directed.
M&L for rendering 15 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for Cement plaster 10 mm thick in cement mortar 1:4 on concrete surface such as soffits of RCC chajja, roof projection, columns and beams etc finished even and smooth without using extra cement complete all as specified and directed.
M&L for Preparation of newly plastered surface of wall of any description and applying two or more coats of 100 % preminum acrylic emulsion paint having VOC less than 50 gm/litres and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer @ 0.90 litres/10 sqm over new surfaces complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as plinth protection laid in a slope 1:50, laid in alternative bays (bay length shall be not exceeding 2.0 Sqm each) and finished fair on top surfaces. Joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) complete all as spciified and directed.
M&L for Hard core of broken stone boulders of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface complete all as specified and directed.
Material and labour for 75 mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed (Rate, 571.40-129.70=441.70)
M&L for 25mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even without using extra cement complete all as specified and directed.
M&L for applying APP based polymeric membrance minimum weight 3kg/Sqm and minium 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) land on primed surface by forced application complete all as specified (a) (Make : WP Shield Primer W of SIKA/Shalikote T-32 of STP/Equivalent brand of Tikidan Danosa. (b) APP membrane applied with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified and as directed. (Make of APP Membrane: WP Shield 103 PM of SIKA/Super Thermolay 3mm (MT) of STP Limited/Equivalent brand of Tikidan Danosa.
M&L for two coat of oil bound distemper over a coat of alkali resistant primer over and including wall putty on new plastered surface on wall including prepration of surface complete all as specified and directed.
M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but n.exceeding 0.11sqm as in floors set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles over including screed bed 15mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.
S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast(40x3mm) etc. complete size /profile of frame as per IS including one shop coat of primer complete all as specified and directed.
M&L plain cement concrete cast in situ 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed
S&F Plain, framed, panelled shutters 30mm thick 2nd class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
M&L for Aluminium alloy, anodised, sliding door bolt with hasp 250mm, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed staple plate and fixed complete all as specified and directed.
S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of etruded section and fixed complete all as specified and directed.
Supplied and fixing of steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
M&L for prepration of steel surfaces of ant description and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.5cum, getting out in any type of soil and returning , filling and ramming earth or broken rubble mixed with earth with around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded aggregate) in foundations filling and mass concrete complete all as specified and directed.
S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe 410-W(GdeE- 250) quality-A complete all as specified and as directed.
M&L for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410 -W (Gde-E- 250) quality-A. complete all as specified and directed.
S&f Mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws acomplete all as specified and directed.
Excavating over areas, under floor n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base and plinth protection finish the cement concrete surfaces fair complete all as specified and directed.
M&L for 100 mm thick cement concrete type B2, 1:2:4 (using 40mm graded stone aggregate) including finishing cement concrete surface even and smooth without using extra cement complete all as spciified and directed.
M&L for Forming construction/dummy joint 100mm deep x 10mm wide filled with sealed compound grade "A" complete all as specified and directed.
M&L for Forming 12mm thick expansion joints filled with pre-formed bituminus filler and top 30 mm primed and sealed with sealing compound, grade'A' complete all as specified and directed.
S&F mild steel angle iron post and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets ( for securing wire mesh etc) inclduing all necessary drilling, bolting or reveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Supply only mild steel round bars 10mm dia, cut to length, bent to shape required for fixing chain link fencing complete all as specified and directed
S&F mild steel bolts screw (Machine made) wth hexagonal or square head at one end and screw the other or screw both ends, each screwed ends to be fitted with washer and one hexagonal or square length of nut exceeding 5cm and not exceedign 10cm and diameter of neck in mm 11 to 15mm complete all as specified and directed
Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed
Fixing only chain link fencing including line wires,MS bars any mesh, any size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not exc 10 cm width or girth including preparation of new surfaces complete all specified and directed.
M&L for Point wiring with PVC insulated unsheathed FRLS 1.5 Sqmm multi stranded copper conductor cable 1100 Volts grade & 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit as concealed conduit not less than 19/20 mm dia with all fittings, shunk in MS Pressed steel terminal boxes suitable depth and 1.6mm thick (duly painted with two coat of anti corrosive paint out side and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc incl cutting chases complete complete all as specified and directed.
All as per item No. 59.00 above but with socket outlet 5 Amps controlled by one switch on the same board complete all as specified and directed.
All as per item No. 59.00 above but with One socket outlet 5 Amps controlled by one switch on independent board complete all as specified and directed.
All as per item No.59.00 but with 2.5 sq mm copper conductor for 15 amp independent Switch Socket combined complete all as specified and directed.
S&F Switch piano flush button type single pole, one way 5 Amps, 240 Volts, complete all as specified and directed.
S&F Socket outlet 5 pin, 5 Amps, 240 volts flush type complete all as specified and directed.
S&F Switch Socket combination 2 in 1, 5 Amps flush type, 230 Volts complete all as specified and directed.
S&F Switch Socket combination, 3 pin 5 and 15 amps multi purpose 5 in 1 flush type, 230 Volts complete all as specified and directed. .
S&F ceiling rose surface bakelite 3 terminals complete all as specified and directed.
S&F Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings complete all as specified and directed.
S&F LED bulb 9 watt complete all as directed.
S&F new generation energy saving, wall mounted LED Tube light batten fittings, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.
S&F 35W LED street light fixtting for bldg security with Aluminum body with PC cover, with LED life should be more than 50000 hrs, THD<10%, PF>0.95, system lumens > 4500 Lumens with all accessories internaly pre wired, and including connecting up with twin core flexible copper conductor cable with bracket made out of GI tubing 20mm dia light grade up to 1.2 mtr length with suitable size bracket and nut and bolt complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board, 6 way, Double door with IP-43 protection single phase 240 Volts, including suitable size copper bus bar and neutral link, fixed flush in wall incl cutting chases to wall for fixing DB complete all as specified and directed.
Supplied & Fixing MCB Single Pole and neutral 240 volts of capacity 32 Amp complete all as specified and directed.
Supply & Fixing MCB Single Pole of cap 06 to 32Amp, 240 volts complete all as specified and directed.
M&L for Earthing with galvanised steel pipe electrode, 40 mm bore, medium grade, 2.5 meters length, burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.25 meter below ground level, connected to galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing main DB's/ Panels all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 : 3 : 6) type C1 and CI pit cover with frame duly grouted in the PCC chamber. Charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as specified and directed. Note:- (i) Item of earthing includes cost of 15mm bore medium grade GI protection Pipe (7.5 Meters long) for earth lead. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.
Supply and fix 1100 volts grade heavy duty XLPE cable of size 16 Sqmm, 2 core, with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed passing through GI pipe complete all as specified and directed.
Material and Labour for GI Pipe 40 mm dia (cable protection pipe) complete from wall, road crosing, pole etc complete all as specified and directed.
M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]
Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed
M&L for errection, testing and commissioning of High Mast pole system consisting of two section suitable for 55m/s wind speed alongwith head frame, made out of hot dip galvanised steel structure 16 Mtrs long, steel wire rope 6mm dia 97/19 guage, double drum winch, luminiaries carriage suitable for 06 luminiaries in symmetrical arrangement and other accesories manufactured in factory with raising lowering system comprising double drum winch, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, (Wiring material from JB to individual luminiare & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries and timer switch with all connected accessories for automatic switching of light, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sq. mm and out going 2.5sq. mm terminals. 16M High mast of BAJAJ Make or equivalent in GE, Crompton, Philips, Havells. Note : Foundation bolts manufactured from special steel along with nuts, washeres, anchor plates and templates complete as recommeded by manufacturer or all as dircted by Engri-in-Charge. (i) The cost of Aviation light, feeder piller box, copper cable 5 core, 2.5 Sqmm from feeder piller box to 250 Watt LED light deemed to be included in the quoted rate. (ii) The cost for RCC foundation shall be born by the contractor and design should be as per manufacturer recommendations & no extra amount will be paid to the contractor on this account. (iii) Design/drawing for foundation is as per manufactrer approval. (iv) The excavation of soil for RCC work for the foundation deemed to be included in the quoted rate contd/...
Item No 80.00 contd HIGH MAST SYSTEM MAKE : Bajaj Electricals Ltd or equivalent in GE, Crompton, Philips, Havells. Height of mast : 16 Meter No. of Section : Two Material Construction : S355 Grade as per IS 2062/BS-EN10 025 Base dia and top diameter (A/F) : Top : 150mm Botton : 460 mm Cross section of Mast : 20 side polygon Standard for Galvanisation : A per BS EN ISO 1461 Size of Opening and door at base : 1200 x 2500 mm Diameter of base plate : 570 mm Thickness of base plate : 25 mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 55m/s as per IS 875 (Part III) Number of foundation bolts : 12 Nos PCD of foundation bolts : 590 mm Type / diameter / length of foundation bolts : TS 600/30mm dia/ 850 mm long LUMINAIRES CARRIAGE Material of construction : 50 NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 08 Arm, Welded, 2 Sections Load carrying capacity : 16 Luminaire
Item No 80.00 contd TRAILING CABLE Conductor : Copper, 5 core, 2.5 Sqmm Insulation : PVC Flexible No.of circuits per mast : One No cable per mast WINCH / POWDER TOOL Type /SWL of winch : Double drum, SWL 750 Kg Method of Operation : Integral Motor Motor Capacity : 1.0 HP ( Including suitable starter) No of Speeds : 6 Pole, Single speed Torque Limitor : With Mechanical Tripping Facility STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : 6 mm, 97/19 guage, Breaking load Capacity : 2350 Kg x 2
Supply and fixing LED flood light 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make Bajaj Cat Part No-BJFL 250W LED WH MB or equivalent in Havells/ CG
M&L for Earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 M below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 Meter below Ground Level connected to Galvanized steel stip Strip 25X4mm as Earth Lead by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers not exc. 150mm thick, Aluminium Strip protected with and including Galvanised Iron Pipe 40mm Bore (dia) Light Grade and CI cover with frame duly groted with PCC incl necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Spoil upto a distance of 50.00 M and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion complete all as specified and as directed.
Supply and Laying only cable XLPE 1100 Volts Grade Heavy Duty 3.5 Core 25 Sqmm Electric Cable with Aluminium Stranded Conductor served with an inner Sheathing of PVC Tape armoured with Galva-nised Steel Strip and overall PVC sheathed, Nominal Cross-Sectional Area incl connecting and Testing, complete all as specified and as directed.
Material and labour for errection in position including steel tubular swaged poles type 410 SP-44 (10.00 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts, screws and top cover all as specified and including the following:- (a) Excavation in trenches not exceeding 1.5 mtr wide and 2 mtr deep for pole foundation and getting out in soft/ loose soil, returning filling in the excavation of soil after fixing the pole in foundation ramming earth around in layer not exc 25cm thick and disposal of surplus soil to a distance not exc 50 mtrs. (b) Material and labour for providing PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation, 600 X 600 mm cross section planting depth 1.8 mtr for concrete casing the pole upto GL complete all as directed. (c) Material and labour for providing PCC 1:3:6 type C-2, using 40mm graded stone aggregate for plinth block/collar above GL 300 mm high and 450mm dia all as directed. (d) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide steel primer including preparation of surface including painting of 30cm wide blue bands 3 Nos. with synthetic enamel paint in alternate layer upto the height of 1.5m above plinth block. (e) Material and labour for writing letter or figures (Block, Roman, italic as Indian) with thick synthetic enamel paint of approved shade not exc height in numbering of pole all as directed and cost of the all included in the quoted rate.
Supply and Laying only cable XLPE 1100 Volts Grade Heavy Duty 4 Core 16 Sqmm Electric Cable with Aluminium Stranded Conductor served with an inner Sheathing of PVC Tape armoured with Galvanised Steel Strip and overall PVC sheathed, Nominal Cross-Sectional Area incl connecting and Testing, complete all as specified and as directed.
Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed
M&L for fixing galvanised Steel circular lantern carriage of min dia 700 mm suitable for 03 Flood Light fiiting made of GI Pipe medium grade of size 40 mm dia and hollow section for top end of size 100 mm dia, GI medium grade including nut & bolt complete all as specified and directed. (Note:- (i)The drawing of Circular lantern carraige will be approved by Engr-in-Charge/GE (ii) Febrication Charge shall be deemed to included in the Quoated Rate
Supply and fix of pole mounted junction box (sintex box) with inside dimensions 350X250X150 mm with porcelain connector 2 Nos, colour coaded aluminium bus bar of rating 63 amps mounted on non cracking epoxy insulators, MCB SPN 40Amps, 250 volts, 'C' curve - 01 Nos. Mounted in including provisioning of mounting arrangements with clamps, nut, bolts, and washer etc for fixing to pole, drilling with proper hole for incoming and outgoing cables connection of suitable size with bus bar complete all as specified and directed.
M&L of 1100 Volts grade, heavy duty cable, PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed for street light connections cable flat or cicrular of size 10 Sqmm twin core cable stranded conductor complete all as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with silent brushless direct current copper motor, marking Srl No SM No / MES No with black paint and complete connection with 1sqmm 3 core PVC Sheathed copper wire all as specified and directed by Engineer-in-Charge. Make : Bajaj, Model No : Energos 28 or equivalent in CG/ Havells
Dashmesh Enterprises
pyarelal galar
TANUJ CONST. CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .