Construction of new Dock Canteen near Gate no-III

Amount

Cleaning the shrub, jungles, bushes, trimming the tree branches along the road side, cleaning the weeds from road edges, collecting the debrises from the road,pathway, corridor and disposing the same at a designated place with supply of all labour, T&P, Transportation, T&P, taxes tollage,Port Entry Fees etc, excluding GST, all complete as directed by Engineer-in-charge.

Providing 300mm dia Single under reamed RCC M-20(Bored Compaction) Pile of 9m length from cut off level including welding of cages, boring through all strata from existing ground level with removal of obstruction if any, using bentonite, providing required reinforcement as per drawing, welded properly and disposing the boring earth out from the work site, including supply of all labour, materials, taxes, tollage, royalties, T&P,Port Entry Fees etc complete exlcuding GST and as per direction of Engineer in charge. (Payment shall be made from cut off level). (Excluding Cost of Reinforcement. Bending, Binding Charges)

Providing 300mm dia Single under reamed RCC M-20(Bored Compaction) Pile of 6m length from cut off level including welding of cages, boring through all strata from existing ground level with removal of obstruction if any, using bentonite, providing required reinforcement as per drawing, welded properly and disposing the boring earth out from the work site, including supply of all labour, materials, taxes, tollage, royalties,Port Entry Fees, T&P etc complete exlcuding GST and as per direction of Engineer in charge. (Payment shall be made from cut off level). (Excluding Cost of Reinforcement. Bending, Binding Charges)

Cutting of pile heads upto 0.30m from cut off level and disposing the debrises clear out of the work site with supply of all labour, T&P,Port Entry Fees etc. complete excluding GST and as directed by Engineer in charge.

Earth work in excavation in all kinds of soil and disposing the same at a designated place with in a lead of 5km & lifting the same with dressing, leveling & compacting the foundation bed, breaking the clods to maximum 5cm to 7cm, and keeping the required quantities for back filling with cost of labour, T&P,Port Entry Fees, tollage,transportation, loading at one end & unloading at other end, all taxes, excluding GST all complete as per the direction of Engineer-in-charge.

Back filling the excavated material in low laying area using the excavated material with all lead & lift with dressing, leveling & compacting the material around the structure, breaking the clods to maximum 5cm to 7cm laying in layer not exceeding 0.30m. with cost of labour, T&P, tollage,Port Entry Fees, taxes,compacting the same all complete as per the direction of Engineer-in-charge but excluding GST.

Sweet Sand filling at required lacations including watering & ramming in layer not exceeding 300mm, including cost of all materials, labour, T&P, transportation charges,loading at one end and unloading at other end. , royalties, taxes, Port Entry Fees etc. all complete as per direction of Engineer-in-charge but excluding GST. NB: 10.00% voids will be deducted from actual measurment at site to achieve the payabe quantity.

P.C.C(1:3:6) using 20mm size C.B.H.G chips of approved quality in foundation & plinth including mixing, hosting, laying to proper level & slope consolidating, curing, watering charges, finishing smooth to the exposed surface including cost & supply of all materials, labour, Transportation,Curing, T&P,Port Entry Fees, all taxes, excluding GST etc all complete as directed by Engineer-in-charge.

Reinforced Cement concrete (1 cement:1.5 Coarse sand:3 chips) using 12mm to 20mm size C.B.H.G. chips of approved quality for all floors, foundation & plinth etc. of including mixing in a mixer machine, hoisting, laying in proper level, consolidating by mechanical vibrator,finished smooth to the form work and exposed surface, curing, water charges, including cost of all materials, labour, Transportation, all testing, engagement & hire charges of all mechaniries with cost of operator and safety of workmen,T&P ,Port Entry Fees, tollage, royalties, all taxes excluding GST etc.all complete but excluding cost of reinforcement,formwork and bending/binding charges as directed by Engineer-in-charge.

Providing reinforcement steel of required diameter manufactured by SAIL/TISCON/VIZAG Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges,loading at one end & unloading at other end,T&P,Safety of Workmen,Port Entry Fees, all taxes,etc. all complete as per the direction of Engineer-in-charge but excluding GST. (NB: No Wastage shall be Paid, Steel Coefficient shall be considered as per IS1786 for Payment Purpose.)

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank & MS pipes, jacks and other accessories of approved quality for R.C.C. work for following structures and deshuttering, removing the same after due period with paining with coal tar /lubricants on the ply/steel surface after each use with supply of all materials, labour,transportation, T&P, all taxes, royalties, tollage,Safety of Workmen,Port Entry Fees but excluding GST etc. complete for all floors / any height as directed by Engineer-in-charge.

Foundation & Plinth

Coulmn & Beam

Roof/Slab,Chaja

StairCase

Brick work(1:6) with Flyash Brick having crushing strength not less than 75kg/CM2 in cement mortar(1:6) inclduing splay/cutting, racking out the joints, curing, hoisting, stagiing, at any height with cost and supply of all materials, labour, T & P, taxes, royalties, transportation charges, curing, testing charges, Port Entry Fees, Safety of Workmen, but excluding GST etc. all complete as per direction of Engineering-in-charge.

Cement plaster of following proportion, over brick & R.C.C. surface finished smooth to the exposed surface, rounding the corners providing grooves,beading,raincuts, wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, safety arrangements of Workmen,Port Entry Fees but excluding GST etc. all complete as per direction of Engineer-in-charge

12mm. Cement plaster (1:6)

16mm. Cement plaster in CM(1:6)

25 mm thick graded concrete with C.C(1:2:4) by using C.B.H.G chips of 6mm and down grade of approved quality adding 2% WPC of approved brand as suggested by department ,chipping the roof surface preparing the surface before concrete work, laying concerete to required slope & level, compacting etc. all complete with supply of all materials, labour T&P, taxes royalties, curing, Port Entry Fees, excluding GST etc all complete as per direction of Engineer in-charge.

Cement Punning over plastered surafce finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, Port Entry Fees, tollage, royalties, etc.excluding cost of GST complete & as per direction of Engineer-in-charge.

Supplying, fitting, fixing of Indian Sal wood frame chaukath of Size 100 mm x 75 mm for door , coaltaring two coats to wall side face of frame, fixing in position with required no GI self driven bolts of approved quality including cutting grooves in chaukaths, jointing with adhesive solution,fixing to proper position, mending good to damages placing the chowkath to plumb,with enamel painting to the chaukaths including cost and supply of all materials, labour, T&P, Port Entry Fees,all taxes, transportation but excluding GST etc all complete as directed by Engineer In-Charge.

Providing and fixing 32 mm thick flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, with required melamine polishing to the both face and side of the shutter, including cost of all materials, labour, T & P,Port Entry Fees, all taxes, transportation but excluding GST etc all complete as directed by Engineer In-Charge.

Supplying, fitting, fixing of FRP door frame of 75mmx100 mm or 70 mmx 120 mm shall be fabricated using E-glass Chopped , U.V stabilized,isophthalic gelcoat & impregnated with isopthaic resin. The thick ness of FRP skin shall jot be less than 2 mm.The Door Frame shall be proved with wooden reinforcements of 6 locationsfor high scrrew holding capacity & fixing the metalic hold fast & shall be consolidatec by filling of Plaster of Paris with supply of all labour,material,T& P ,Port Entry Fees, all Taxes,transportation, Staging etc. all completebut excluding cost of GST as directed by Engineer In-Charge.

Supplying, fitting, fixing of FRP door shutter of 30mm thickness, approved design, shade and approved size & specification, providing CP hinges, CP handles, CP Tower bolts of approved quality with supply of all materials, labour, T&P , tollage, transportation,conveyance charge, of approved shade & colour for fixed/openable sliding and Port entry fees but excluding GST etc all complete as directed by the Engineer-in-charge.

Supplying, fitting, fixing fully glazed powder coated Aluminum window/ventilator shutters with anodized aluminum section of 63mm. x 37mm. x 1.50mm. thick as per approved design fixing with 5.5mm. thick plain/frosted/coloured glass panes, providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks as per requirement IS specification, all finished including cost & supply of all materials, labour, T&P, taxes, transportation charges,Port Entry Fees, staging, scaffolding, making the windows waterproof using sealicon sealant but excluding GST etc all complete and as per direction of Engineer-in-charge.

Supplying, fitting, fixing of fully glazed aluminium framed openable door using 15 Micron andized OEL aluminium section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapperd clip of section 4125 aluminium angle, rubber beading, friction stay and handled etc. with 8mm thick plain/black glass panel including cutting to sizes, drilling holes, jointing the corners of frames with providing all fixtures with supply of all labour, materials, T&P, machineries, power, hire & running charges of machineries, scaffolding including locking arrangement, all taxes, Port entry fees etc. all complete excluding GST and as per direction of Engineer in charge.

Supplying, fitting, fixing aluminum grill of approved quality for window/ventilator shutters providing rubber beading, aluminum U channels, angle, clips, etc. all complete including cost & supply of all materials, labour, T&P, taxes, transportation charges, staging, scaffolding,Port Entry Fees, etc. complete excluding cost of GST and as per direction of Engineer-in-charge.

Supplying,Fabricating,fitting fixing of MS Grill,made of solid Square bar /MS Flat/MS Angle/MS Channel etc.fixing position with screws,clamps,nails including grouting if required with cost and supply of all materials, labour, T&P, taxes, transportation,Port Entry Fees, welding charges, grinding, staging, scaffolding, but excluding GST etc all complete as directed by the Engineer-in-charge

Painting two coats of Enamel paint of approved quality shade over a coat of primer,after scrapping, cleaning the surface, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding,Port Entry Fees, but excluding GSTetc all complete and as per direction of Engineer-in-charge.

Providing and applying termite treatment to soil under floors at the junction of floors and walls, floor surface where construction defects are noticed, at construction joint and at expansion joint in all floor by drilling 12mm holes vertically at 300mm interval to reach the soil below and squirted chemical emulsion into these hole using a hand operated pressure pump and the holes then sealed with white cement. including all cost of insecticide, labour, transportation. taxes, staging, scaffolding,Port Entry Fees, etc excluding cost of GST all complete as per the direction of engineer in charge. NB 1. This is a onetime treatment. 2. The warranty period for the above work is 02 years. 3. The measurement will be taken as per the plinth area.

Supplying, fitting, fixing of gypsum board false ceiling & cornice, with G.I frame, stay, hooks, nut & bolt, fixing the new board, fixing nylon tape over the joints & applying a coat of putty over it & finishing with supply of all materials, labour, T&P, all taxes, staging, scaffolding,Port Entry Fees, etc. complete excluding cost of GST as per direction of Engineer-in-charge.

Applying two coat of approved quality wall Putty over the wall surface at any floor and any height having resistance to Fungus, moisture, Fading including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding,Port Entry Fees, etc. but excluding GST complete and as directed by the Engineer-in-charge.

Painting two coats with plastic emulsion paint of approved quality & shade over a coat of primer, at any floors and any height with applying the paint uniformly including cost of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding,Port Entry Fees, safety of workmen, but excluding GST etc all complete and as per direction of Engineer-in-charge.

Painting two coats using 1st quality Weather Coat Paint over the wall surface at any floor and any height over a coat of primer of approved quality & shade having resistance to Fungus, moisture, Fading including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding,Port Entry Fees, safety of workmen but excluding GST etc all complete and as directed by the Engineer-in-charge.

Supplying, fitting, fixing abrasion resistant full body vitrified tile of size 605mm. x 605mm of approved quality brand, shade laying over a base course of CM(1:1) of required thickness and cement slurry including cutting to size, filling the joints with tile grouts of appropriate shade laid to proper slope & level cleaning the top surface with cost and supply of all materials, labour all wastages, mending good to the damages T&P, taxes, curing, transportation,staging charges,Port Entry Fees, but excluding GST etc all complete as per the direction of Engineer-in-charge.

Providing & laying factory made concrete paver blocks of M-30 grade of 80mm thick of approved size & design with consistent and uniform quality, rubber moulded, pigmented block lacquer coating and cured through drying process mechanically vibrated and compacted precast interlocking of approved size, design and colour with providing and laying in position over 50 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping including all taxes, T&P, tollage, all machineries, transportation,Port Entry Fees, safety of workmen etc. complete excluding GST and as per direction of Engineer in charge.

Chequred, pre-polished and precast exterior grade cement concrete Chequered tiles of 22-25mm thick & approved size and design with consistent and uniform quality, white cement pigmented and casted in a rubberised mould, laying over 20mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) and cement slurry in proper level, slope, filing the gaps with neat cement slurry mixed with pgiment to match the shade of tile including cleaning of joint etc complete on with cost & supply of all materials, labour, T&P, taxes, tollage, royalties, curing with all transportation charges,loading at one end and unloading at other end,Port Entry Fees, but excluding GST etc. all complete & as per direction of Engineer-in-charge.

Supplying, fitting, fixing of ceramic glazed tile of approved quality, size, shade, over wall and floor, fixing over a 20mm base course of C.M(1:4) and cement slurry including cutting to size filling the joints with tile grout , fixed to proper level etc. all wastages, mending good the damages, with cost and supply of all materials, labour, T&P, taxes, tollage, curing transportation charges, cleaning,Port Entry Fees, etc. excluding cost of GST complete & as per direction of Engineer-in-charge.

Anti Skid Floor tile (300mm x 300mm size)

Wall Tile (300mm x 450mm size)

Providing and fixing of granite of 20mm thick for various decorative iterms cladding etc and quality over a required base coure of cement plaster (1:4) & cement slurry including cutting to size filling the joints with white cement, fixed to proper level in cluding moulding where ever necessary etc. all wastages, mending good the damages, with cost & supply of all materials, labour, T&P, taxes, tollage, royalties, curing with all transportation charges, Port Entry Fees but excluding GST etc all complete & as per direction of Engineer-in-charge.

Supplying, fabricating and fixing of stainless steel of 304 grade in hand railing using 50mm. dia of 2mm. thick circular pipe with fabricating of 2 mm thick circular pipe with newel posts of 75mm Øx 900 mm height balustrade of size 32mm. dia x 2mm thick @ 0.90mtr. C/C and pipe bracing of size 32mm. dia. x 2mm thick in 3 rows at stair case and other required places as per approved design & specification, muffing, polishing, etc. with cost of conveyance, all materials, labour, T&P, taxes,Port Entry Fees, etc.excluding cost of GST all complete as per direction of Engineer-in-charge.

Supplying, fitting, fixing 2000 Ltrs capacity Sintex triple layer water tank and all its fixtures of approved quality with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding handling charges,Port Entry Fees, but excluding GST etc all complete as per direction of Engineer-in-charge.

Supplying, fitting, fixing & laying of of 20 mm dia. Chlorinated C-PVC pipes having thermal stability for hot & cold water including all cpvc plain & brass threaded fittings & all related accesorries fittings for laying of Pipe line including fixing the pipe with clamps including jointing of pipe and fittings with schedule -40 of any approved quality for water supply & sanitary works with supply of all accessories fittings labour, material, T&P, transportation, taxes, staging, scaffolding,Port Entry Fees but excluding GST etc all complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing & laying of following Un plasticized C -PVC pipe & fittings including all cpvc plain & brass threaded fittings & all related accesorries fittings for laying of Pipe line including fixing the pipe with clamps including jointing of pipe and fittings conforming to schedule-40 for water supply & sanitary works of approved quality and colour with supply all accessories fittings ,labour, material, T&P, transportation, taxes, staging, scaffolding,Port Entry Fees etc. excluding cost of GST all complete as per direction of Engineer-in-charge.

50mm dia pipe

32mm dia pipe

25mm dia pipe

Supplying, fitting and fixing & laying of following PVC grey pipes of type-B schedule-40 conforming to IS-13592 with all accessories & fittings conforming to IS-14735 & all related accesorries fittings for laying of Pipe line for water supply & sanitary works with supply all accessories fittings, labour, material, T&P, transportation, taxes, staging, scaffolding, Port Entry Fees, but excluding GST etc all complete as per direction of Engineer-in-charge.

110mm PVC Pipe

150 mm PVC pipe of Type- B class

Supplying, fitting and fixing the following sanitary, CP and porcelain fittings of approved make & quality with all accessories & fittings etc. with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding, Port Entry Fees, etc.excluding cost of GST all complete as per direction of Engineer-in-charge

Commode With Cover Vitrious china Colour -White

Orissa Pan

Low level Cistern 10 ltr Capacity

CP long body bibcock

CP health faucet with 8mm dia 1.00 m long flexible tube with PRV

CP overhead shower 150x150 mm square shape single flow

CP 15 cm Pillar cock

CP angular stop cock 15 mm

CP waste coupling 32mm size half thread with 80mm height

CP towel rail 600mm long

CP glass shelf 600mm long

CP soap dish holder chrome wall mounted of Standard Size

600mmx450mm fancy glass mirror

CP bibcock

CP floor grating of size 125mm

Counter Top Wash Basin 550mm x400 with Half Padestal

Wash hand basin of size 530mmx425mm (white) vitrious china with half pedestal

standing Urinal Vitrious China with Half Padestal CE/BC/Accts/20/2014

Squarting urinal 600mmx350mm Vitrious China

CP toilet paper holder with flap (Cover) 300 mm

32mm PVC waste pipe 600 mm length

25 to 40mm CP extension nipple

12 to 25mm CP extension nipple

Stainless steel sink of size 25”x18”x10" CE/BC/Accts/32/2014

Conceal stop cock 15 mm dia

Supplying,fitting & Fixing of following items including cost and supply of all labour, all fittings, T&P, all taxes, transportation to work site , staging, scaffolding,Port Entry Fees etc. excluding cost of GST all complete & as per direction of Engineer-in-charge.

Godrej Make Mortisc luck (Six lever)

Godrej Make Hydrolic door closer Heavt Type

Brass Door Stopper

Door Knob 75 mm

Tower Bolt 12 cm length

Alumimum Aldrop 300mm length 16 mm dia bar

Construction of Manhole Chamber of Size(900mmx900mmx1000mm) including top cover slab( 1:1.5:3) mix with foundation concrete (1:4:8) inside plaster 12 mm thick with Cemnt mortar 1:4) finished with neat Cement Punning , 12 mm thick outside plaster (1:4), Brick Work(1:6) with crushing strength not less than 75kg/sqcm finished smooth with suppy of all material,T&P, all taxes, transportation , staging, scaffolding,Port Entry Fees, etc. all complete as per direction of Engineer-in-charge. etc. excluding cost of GST all complete & as per direction of Engineer-in-charge.

Construction of 1.2 mtr. dia x2.55 mtr deep soak-way pit with dry brick walling up to 2.10 mtr. height & brick work with cement mortar(1:6) for balance 0.45 mtr height of wall top plaster (1:3) indise and outside filled with day brick khao of 50 mm to 100 mm size to a height 2 mtr from bottom covered by means of 40 mm thick perforated slab, 50 mmthick R.C.C well cover in Peices fitted with iron strings with all materials, labour, T&P, taxes, transportation charges, staging, scaffolding,Port Entry Fees, but excluding GST etc all complete and as per direction of Engineer-in-charge.

Supply, fitting and fixing of following item as described below.

Supplying fittting and fixing /providing decorative steel signage boards to be provided at front door of each room along with key rings & lockets madeout decorative stainless steel having same letters and figures, with supply of all materials, labour,cost of engraving as decided by the department & colouring ,fittting,fixing,all taxes ,Port Entry Fees,etc. all complete to the satisfaction and as directed by Engineer-in-charge but excluding GST. NB: 1)The Size of Signage board should not be less than 75mm/100 mmx200mm/250mm in size having as follows: 2) The Key ring locket should not be less than 50mmx38mm in size having eliptical shape with same content as mentioned above.

Providing,fitting and fixing solid Stainless Steel lettes of 200mm widex300mm depth over the granite cladding/Plastered surface with supply of all labour, materials,Scafolding, T&P, transportation, fixing charges,all taxes, Port Entry Fees, but excluding GST etc. all complete as per direction of Engineer-in-charge.

Providing and fitting & fixing of aluminium sections of required size & specification as per approved by the department, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves,screws etc. necessary for fabrication of extruded aluminium frame work with supply of all labour, materials,Scafolding, T&P, transportation, fixing charges staging,Port Entry Fees, Safety of Workmen, all taxes, but excluding GST etc. all complete as per direction of Engineer-in-charge. NB-No Wastage shall be Paid.

Providing , fitting & Fixing of Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on both surface of approved colour and shade ,all complete for the required performances as specified, supply of all labour, materials,Scafolding, T&P, transportation, fixing charges,all taxes, staging,Port Entry Fees, Safety of Workmen, but excluding GST etc. all complete as per direction of Engineer-in-charge. NB-(i) No Wastage shall be Paid.

Engagement the following machineries for Cutting & removal of Extra earth & debrises from the work site including loading one end & unloading at the other end,engagement,hire and running charges, operator expenses,fuel,lubricants with all materials, labour, T&P, taxes,Port Entry Fees, Cost of Operator but excluding GST etc all complete and as per direction of Engineer-in-charge. NB-No idle Charges shall be paid.

Earth Excavator 1 Cum bucket Capacity

Tractor

M/S BHAIRAB CHARAN SWAIN

M/S Kailash Chandra Samal

Bidyadhar Swain

SUBRAT KUMAR BEHURA

P.S. Construction

Naresh Chandra Bhatta

NNS CONSTRUCTIONS AND ENGINEERING PRIVATE LIMITED

M/S AMIYA KUMAR MOHAPATRA

Aakar Infra Engineers PVT Ltd