SPECIAL REPAIRS TO BLDG NO P 24 AT AFS CHABUA UNDER GE AF CHABUA

Amount

B/R SERVICES/ WORKS

Demolition Cement Concrete (Un-reinforced) in any Position not otherwise specifically Provided for and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically Provided for including Reinforcement cut as required to facilitate Demolition and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Masonry Work, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed

Dismantling Timber Scantling 40 Sq Cm and Over in Section in Unframed Work and fixed in any Position, complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and Over in Section in Framed Work and fixed in any Position, complete all as specified and as directed.

Taking down Chowkats or Frame (without Taking Off Shutter from the Frame) of any description, not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkats or Frame (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed.

Hacking out Broken Glass of any description from Wooden or Metal Frames, or Stone, Concrete or Brick surrounds of any thickness or size; Hacking out Old Putty or Removing Beads, etc., complete all as specified and as directed.

Dismantling Mild Steel Framed Trusses of Span not exc. 10.00 Metre, complete all as specified and as directed.

Dismantling Asbestos Cement (Corrugated, Semi-corrugated, etc.) Sheets in Roof Coverings of any thickness, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheet or Galvalume Sheet of any gauge and thickness, complete all as specified and as directed.

Dismantling Ceiling Frame (Snap Grid) with Hangers (but except Boards) of any descriptions, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, hacking for Key, scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Dismantling/ Lowering down Unserviceable Water Storage Tank exc. 500 Litre but not exc. 1000 Litre Capacity of any description after disconnecting of Water Supply Connections including Float Valve, complete all as specified and as directed.

Dismantling/ Lowering down Unserviceable Water Storage Tank exc. 1000 Litre but not exc. 2000 Litre Capacity of any description after disconnecting of Water Supply Connections including Float Valve, complete all as specified and as directed.

Demolition and Breaking up Drain Pipe 150mm Internal Dia (Salt Glazed Ware, AC or Reinforced Concrete), Set and Jointed in Cement Mortar including Taking Up/ Out from Trenches (if required), complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in Depth and Getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in with approved Soil including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm thick in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils), exc. 250.00 Metre and not exc. 500.00 Metre and Depositing where directed at a Level not exc. 1.50 Metre above the Starting Point including Spreading over Ground, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (12.5mm graded stone aggregate) in Louvres and Jallies, 50mm thick (measured solid) with all mouldings including Reinforcement with 5.0mm dia Mild Steel Wire and setting in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Mild Steel Wire as Reinforcement will deem to include in the Quoted Unit Rate.

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Hole in Brick Walling, exc. Half Bricks and not exc. One Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregates) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Chases, Pinning in, Making Good to Facings where required and Pointing in Cement Mortar 1:3 to Ends or Edges of Cills, Shelves, Lintels, etc., and Cutting Chases for Concealed Water Tubing and Making Good, Cutting Girth not exc. 10 Cm and not exc. 5.0 Cm in Depth, complete all as specified and as directed.

S&F Second Class Hardwood (well-seasoned) Timber Fillets of Size exc. 6.0 Sqmm and not exc. 13.00 Sqmm, Wrought, Moulding as in Cornices, Picture Rails and the like, and Fixed with Screws and Fixed-in-repairs, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm Plain Colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening, complete all as specified and as directed.

M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (any Colour as approved by GE) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/ fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Butt Hinges will be Measured and Paid under appropriate Item.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Door Shutters, Aluminium Section weighing not less than 0.55 KG/RM including necessary Joining Cleats, Glazing Clips, Rubber/ Neoprene Packing, Handles (as approved) - 2 No. in Each Door, Stainless Steel Hinges of Size as ordered, anodised Aluminium Snap Beading, Screws, etc, complete all as specified and as directed. NOTE : Cost of Aluminium Fittings/ Builders Hardware as mentioned here-in-above will deem to be include in the Quoted Unit Rate.

S&F Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Door Windows & Ventilators including Providing and Fixing Hinges/ Pivots and Making Provision for fixing of Fittings wherever required including the Cost of EPDM Rubber/ Neoprene Gasket required with Extruded built up Standard Tubular Sections/ appropriate Z Sections and Other Sections of Approved Makes, conforming to IS: 733 and IS:1285, Fixing with Dash Fasteners of required dia and Size including necessary filling up the gaps at Junctions, i.e. at Top, Bottom and Sides with required EPDM Rubber/ Neoprene Gasket, etc. Aluminium Sections shall be Smooth, Rust Free, Straight, Mitred and Jointed Mechanically wherever required including Cleat Angle, Aluminium Snap Beading for Glazing/ Panelling, Chromium plated Brass/ Stainless Steel Screws, complete all as specified and as directed. NOTE : Aluminium Fittings/ Builders Hardware, Glazing/ Panelling, etc. as will be Measured and Paid for separately under respective Items..

S&F ACP (Aluminium Composite Panel) 4.5mm thickness to Aluminium Skeleton Doors and Partitions, Non Toxic PE Core 3.0mm and Back Core 0.5mm with minimum 30-/-5 Mirror PVDF coating on Top Coil Polyester/ Epoxy Coating on Back Coil (7 +/-micron) fixed inclusive of necessary Frame Work/ Filleting to hold the ACP Panels and Joints Seal including Taking down Unserviceable Panel of any description, complete all as specified and as directed.

S&F Toughened Designer Glass Door 12mm thick, fixed on Steel Pivot all as Approved Sample and including D type SS Handle of Size upto 300mm long 25mm dia on Each Leaf including all Fitting and Fixture for Smooth Functioning of Door including Taking down Unserviceable Glass Door of any description, complete all as specified and as directed.

S&F Anodised Aluminium Grill (Anodised Transparent or Dyed to required Shade according to IS: 1868 with minimum Anodic Coating of Grade AC 15) of Approved Design/ Pattern, with Approved Standard Section and fixed to the existing Window Frame with C.P. Brass/ Stainless Steel Screws @ 200 mm Centre to Centre, including Cutting the Grill to proper Opening Size for Fixing and Operation of Handles and fixing approved Anodised Aluminium Standard Section around the Opening, complete all as per requirement at Site of Work, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm (as approved) and Fixing to PVC Door Shutter, complete all as specified and as directed.

S&F Aluminium Handle 150mm long, Cast type, anodised, extruded and fixed, complete all as specified and as directed.

S&F Double Action Floor Spring, Hydraulically Regulated, made up of minimum 1.25mm thick Aluminium Alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel Heavy duty and fixed, complete all as specified and as directed.

S&F Hat and Coat Hooks, Aluminium Solid Body, 175mm to 250mm and Fixed-in-repairs, complete all as specified and as directed.

S&F Harrison Rail 20mm Dia of Mild Steel with Finials, Brackets, Stops, Rollers, fixed on Walls and Fixed-in-repairs, complete all as specified and as directed. NOTE :- (a) Finials, Brackets, Stops, Rollers, etc. as required will be provided for Each Length of Harrison Rail and Cost of for the same will deem to be include in the Quoted Unit Rate. (b) Only Length of Harrison Rail will be Measured for Payment.

S&F Harrison Rail 20mm Dia of Aluminium anodised, Chromium Plated with Finials, Brackets, Stops, Rollers, fixed on Walls and Fixed-in-repairs, complete all as specified and as directed. NOTE :- (a) Finials, Brackets, Stops, Rollers, etc. as required will be provided for Each Length of Harrison Rail and Cost of for the same will deem to be include in the Quoted Unit Rate. (b) Only Length of Harrison Rail will be Measured for Payment.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary, Glazing in Metal or Wooden Frames and glazed with Oil Putty/ Wooden Beads, not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

S&F Sheet Glass 5.5mm thick, Plain, Ordinary quality and Glazing in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

S&F Sheet Glass 5.5mm thick, Plain, Ordinary quality and Glazing in Square exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

S&F Toughened Glass 12mm thick, Fixed in Partition Independent Opening including All Fitting Arrangement with SS Clips, Filling all Gaps with Silicon Adhesive and Fixed-in-repairs, complete all as specified and as directed.

M&L Stainless Steel (Grade 304) Railing made of Hollow Tubes, Channels, Plates etc. including Welding, Grinding, Buffing, Polishing and Making Curvature (wherever required) and Fitting the Same with necessary Stainless Steel Nuts and Bolts complete including Fixing the Railing with necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts, etc. of required Size, on the Top of Floor or the Side of Waist Slab with Suitable Arrangements, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel in Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails and Fastenings and Heavy Bracket Framing (Beam, Tee, Angle, Channel or Flat Sections) including Distance Pieces, Cleats, etc, conform to Fe-410-W (Gde E-250), Quality 'A', complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

M&L Gl Frame Work for Seamless Ceiling comprising of Gl Perimeter Channel 0.55mm thick with Two Unequal Flanges of 20mm and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and Screws at 450mm Centre to Centre/ Intermediate Channel 0.9mm thick having Two Equal Flanges of 15mm Each and Web of 45mm suspended from Soffit at approx 900mm Centre to Centre with Gl Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc. 1200mm length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm Each with Lips of 10.5mm fixed to the Intermediate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S&F Hangers 6.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceiling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F Seamless Calcium Silicate Ceiling made out of 1800x1200mm size Board 12mm thick of Siliceous and Calcareous Material Reinforced with Cellulose Fibre fixed to the Ceiling Section with 25mm Long Self Drilling and Tapping Screws having Phillips Head with Under Head Cutter at 200mm Centre to Centre including Finishing the Joint of Face Board with specially formulated Jointing Compound and 48mm Wide Fibre Tape to provide Seamless Finish, complete all as specified and as directed. NOTE : Frame Work for Ceiling shall be Measured and Paid separately under appropriate Item.

S&F 18mm thick One Side Decorative Lamination & Other Side Balancing Lamination Sheet consisting of Carcass 18mm thick PVC Sheet and Provision of Shutter made out of 18mm thick One Side Decorative Laminated PVC Sheet all as required and Automating Hinges Screws, etc. Panels shall be Fabricated Using Adhesive and Screws wherever required. All the Edges shall be covered with 2.0mm thick Edge Bonding Tape or 900 Edge Bent Finish as per Make & Specifications and Fixed-in-repairs, complete all as specified and as directed. MAKE : RAJSHEE or Equivalent as Approved by GE

M&L Hardcore Broken Stone or Boulders 75mm thick, Gauge not exc. 63mm, Deposited, Spread and Levelled in Layers, Watered and Well Rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregates) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregates) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

Supply & Laying Polythene Film 50 micron, Black, laid in Floors, etc., complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular or Square), Area of Each Tile exc. 0.18 Sqm but not exc. 0.36 Sqm (1st quality) in Floors, Set and Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 20mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Vitrified Ceramic Tiles 10mm thick (Rectangular or Square) in Dark shade, Double Charged, Polished, Area of Each Tile exc. 1.00 Sqm but not exc. 1.50 Sqm (1st quality) in Floors, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Glazed Ceramic Coloured Tiles 450x300x7.0mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Machine Cut Granite (of any type) Tiles 20mm thick in Floors, Bedded and Jointed with Grey Cement Slurry and Pointed with White Cement with Admixture of Pigment to Match the Shade of Granite Stone including Grinding and Polishing, Fixing over and including Cement Screed Bed 20mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Machine Cut Granite (of any type) Tiles 20mm thick in Vertical Surfaces i.e. Skirtings/ Dado, etc., Jointed with Grey Cement Slurry and Pointed with White Cement with Admixture of Pigment to Match the Shade of Granite Stone including Grinding and Polishing, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platform, etc. in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with admixture of Pigment to match with Shade of Granite, Fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Rounding to Edges of Stone Slabs One Edge, such as in Steps, Cooking Platform and Other Similar Situations, complete all as specified and as directed.

M&L Dholpur Stone Cladding Gang Saw Cut with Machine Cut Edges, Uniform in Colour, Area of Each Stone exc. 0.50 Sqm, Fixed with and including One Number SS Clamps (Grade -202) of Flat - 30x2.0mm, 150mm Long made to Shape in Each Slab, Making V Groove at Top and Bottom of Stone and Drilling Hole for Hold Fastener, Polishing, Rubbing including Silicon Treatment including Removing Existing Surface Treatment, complete al as specified and as directed.

M&L Factory Made Machine Pressed Cement Concrete High Gloosy Chequered Tiles 300x300x20mm thick of any Colour, Design & Pattern (as approved by GE) with White Cement & No Pigments, Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of Tiles over and including 20mm thick Screed Base/ Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to include in the Quoted Unit Rate.

M&L Providing and Laying 60mm thick Factory Made with Glossy Finish Chamfered Edge Cement Concrete Paver Block of M-35 Grade with Approved Colour, Design & Pattern as in Footpath, Parks, Lawns, Drive Ways or Light Traffic Parking, etc. of required Strength, Thickness & Size/ Shape, made by Table Vibratory Method Using PU Mould, laid in required Colour & Pattern over and including 50mm thick Compacted Bed of Fine Sand, Compacting and Proper Embedding/ Laying of Interlocking Paver Blocks into the Sand Bedding Layer through Vibratory Compaction by Using Plate Vibrator, Filling the Joints with Sand and Cutting of Paver Blocks as per required Size and Pattern, Finishing and Sweeping Extra Sand, complete all as specified and as directed. NOTE : Cost of Fine Sand will deemed to include in the Quoted Unit Rate.

M&L Providing and Laying at or near Ground Level Factory Made Kerb Stone of M-25 Grade Cement Concrete in Position to the required Line, Level and Curvature, Jointed with Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) including Making Joints with or without Grooves (Thickness of Joints except at Sharp Curve shall not to more than 5.0mm) including Making Drainage Opening wherever required, Sand, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.

M&L Forming Construction (Dummy) Joints 65mm x 10mm Wide and filled with Sealing Compound Grade 'B', complete all as specified and as directed.

M&L Providing and Injecting Chemical Emulsion for Post Constructional Anti-termite Treatment along External Wall where the Apron is not provided using Chemical Emulsion at the Rate of 7.50 Litres Per Sqm of the Vertical Surface of the Sub-structure to a Depth of 300mm including Excavating Channel along the Wall and Rodding, etc., complete all as specified and as directed.

M&L Treatment of Soil Under Existing Floors Using Emulsion @ 1.00 Litre Per Hole, 300mm Apart including Drilling and Plugging 12mm dia Holes with Cement Mortar 1:2 (1 Cement : 2 Coarse Sand) to match the Existing Floors, complete all as specified and as directed.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Ceiling Surfaces, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:4 on Brick or Concrete Surfaces, finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick on Bricks or Concrete Works consisting in Cement Mortar 1:4, finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

M&L Rendering 15mm thick on Bricks or Concrete Works consisting in 2 layers, Backing/ Under layer of 10mm thick in Cement Mortar 1:6 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/Top finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces on Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Plastered Surfaces on Walls and Applying 1.0mm thick Wall Care Putty, complete all as specified and as directed.

M&L Preparaing New Plastered Surfaces of Walls and Applying Two Coats of Oil bound Distemper Using Airless Spray Technology Over One Coat of Primer with Max Working Pressure of 3300 psi and Capable of Operating Single Spray Gun with a Max Material Hose Length of 30 Metre the Spray Machine should be of Reputed Manu-facturer with Pro-guard Technology and capability of Tracking Pressure and Paint Usage and Certified by Paint Manufacturer and as mentioned in Particular Specification and accessorIes for Appliyng Distemper should be able to Spray in Hard to Reach Area and Penetration of Distemper should be able to Spray in Hard to Reach Areas and Penetration of Distemper on the Surface, complete all as specified and as directed.

M&L Complete Removal of Existing Surface Treatment by Scrapping with Mechanical Wall Sander (having Mechanical Vacuum Mechanism) having not less than 1500 RPM, Sanding Pad of 80 Grit having Dia of 7”/9” to Make the Surface Free from Dust, Loose Paints, etc. or Preparing New Plastered Surfaces of Walls and Applying Two Coats of Water Based Premium Acrylic Smooth Exterior Emulsion over Exterior Primer Applied @ 0.9 Litre Per 10 Sqm of Approved Colour with Silicon Additive & Color Stay Technology, Excellent Dirt Pick up Resistance with Low Voc Less than 50 Gram Per Litre as per the Leeds Specifications, Anti-algal Properties in Two Coats @ 1.79 Litre (Undiluted) Per 10 Sqm Diluted with Water as per Manufacturer Instructions, Applied Over Priming Coat with Fully Automatic Airless Spray Machine of Paint Application with a Slow Speed of Min 1.0 Litre Per Minute having a Pressure of 3300 psi, allow 6 to 8 Hours to Dry the Surface in Both the Coats of Painting as per Manufacturer Instructions, complete all as specified and as directed.

M&L Complete Removal of Existing Surface Treatment by Scrapping with Mechanical Wall Sander (having Mechanical Vacuum Mechanism) having not less than 1500 RPM, Sanding Pad of 80 Grit having dia of 7”/9” to Make the Surface Free from Dust, Loose Paint, etc. or Preparing New Plastered Surfaces of Walls and Applying Two Coats of Smooth Interior Acrylic Emulsion with Texture Finish having VOC less than 50 Gram Per Litre complying Leeds Criteria @ 1.0 Litre (Unndiluted) Per 10 Sqm Diluted with Water in 2:1 Ratio and Applied Over Priming Coat with Fully Automatic Airless Spray Machine of Paint Application with a Flow Speed of Min 1.0 Litre Per Minute having a Pressure of 3300 psi, allow 6 to 8 Hours to Dry the Surface in Both the Coats of Painting as per Manufacturer Instructions, complete all as specified and as directed.

M&L Complete Removal of Existing Surface Treatment on Ceiling and Preparing Surface of Ceiling with applying Bond Plus Synthetic Adhesive or Equivalent before Applying Decorative POP on Ceiling with Decorative Corners at Different Elevation, Finishing with Two Coats of Royal Acrylic Emulsion Over One Coat of Primer Over 1.0mm thick Wall Care Putty, complete all as specified and as directed. NOTE : Design to be approved by GE.

M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any description, over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality / grade Paint of as approved Tint), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAGUAR, Cat No. KUP-35037PM (Bib Cock with Wall Flange)/ PARRY-WARE, Cat No. BIB COCK G5704A1/ KOHLER, Cat No. 25764IN-CP

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAGUAR, Cat No. SNR-15017PMPK (Opal Prime Tall Boy Sensor Faucet for Wash Basin with Pre-mixed Water Supply Kit (Battery Operated)/ PARRYWARE, Cat No. SMART HIGH NECK STANDALONE PILLAR TAP G3764A1/ KOHLER, Cat No. K13460T-CP(DC)

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Screwed down, High Pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Angle Cock/ Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with Long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAGUAR, Cat No. KUP-35083KPM (Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (Compatible with ALD-083, ALD-089 & ALD-081)/ PARRYWARE, Cat No. CUB T9908A1/ KOHLER, Cat No. K-80158IN-CP/AF/BN/BV/BL

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, Screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing Water Connections with and including GI Tank Nipple 20mm (02 No. in Each Tank), complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 2000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing Water Connections with and including GI Tank Nipple 20mm (02 No. in Each Tank), complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having Weight not less than 210 Grams, High Pressure with Epoxy coated Aluminium Rod and High Density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with SWG ‘P’ or ‘S’ Trap, Fixing Bolts and Making Good to Floor/ Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAGUAR, Cat No. LYS-WHT-38953BIUFSM (Rimless, Blind Installation Wall Hung WC with UF Soft Close Slim Seat Cover, Hinges, Accessories Set, Size : 360x500x360mm)/ PARRYWARE, Cat No. OVALO C8967 (S-220) (645x380x755 mm)/ KOHLER, Cat No. K24098K-0

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), (Colour and Pattern fitted as per Sl No. 1.112) with Mild Steel Chromium Plated or Aluminised Hinging Device and Fixed-in-repairs, complete all as specified and as directed

S&F Hand Shower (Health Faucet) with Inner Flexible Tube not less than 1.20 Metre in Length and Wall Hook, Fixed-in-repairs, complete all as specified and as directed.

S&F Toilet Paper Holder, Vitreous China, Coloured, Box type of approved Size with Brass Chromium Plated with Rod to hold Paper Roll, fixed to Walls with Brass Chromium plated Screws and Fixed-in-repairs, complete all as specified and as directed

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type, Dual Flush ISI Marked (IS:7231) with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin in Ovel Shape with Brass Chromium plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm or 40mm bore (dia) of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, Chain, Plug & Porcelain Stopper and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAGUAR, Cat No. JDS-WHB-25907N (Thin Rim Table Top Basin, Shape - Rectangular, Size : 530x420x140mm)/ PARRYWARE, Cat No. IMPERIAL 600 C897A (700x420x150mm)/ KOHLER, Cat No. K-EX21060T-0/HB1

S&F Kitchen Sink with Drainage Board, made of Stainless Steel l.0mm thick, Overall Size 915x460mm having Bowl Size 410x330x160mm with Plugs, Washers and Stainless Steel Waste Fittings, etc. including Bedding in Cement Mortar to dwarf Wall or fixing Cantilever Brackets and connecting Union to Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F 3-Tier Sink with Drainage Board and 3 Bowls, made of Stainless Steel l.0mm thick, for Kitchen or Laboratory and fixed to Wooden Plug with Brass Chromium plated Screws and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in Length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair) and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Soap Dish, not less than 150mm in Size (as approved), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Chromium Plated Grating, Plain including Jointing to Waste Pipe with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Concrete Bed to Drain Pipes of 150mm bore (dia) including Packing Under and Haunching against the Sides of Pipes after they are laid and tested; complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Concrete Pipe 150mm bore (dia), Class NP3 with Collars, Laid in Trenches and Jointed in Cement Mortar 1:2, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 150mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

INTERNAL E/M SERVICES/ WORKS

M&L Taking down carefully Unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any Situations including Fixtures and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any description), etc, Making Good Disturbed Surfaces of Walls/ Ceilings, etc. in Cement Mortar 1:3 including Applying Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down/out Unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including Applying Surface Treatment (White/ Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down Unserviceable Distribution Boards of any description from any Situation after disconnecting, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including Applying Surface Treatment (White/ Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE CEILING FAN/ EXHAUST FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE BELL/ BUZZER POINT controlled by One Bell Push, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP, 3/5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, controlled by One 1-Way Switch, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP, 3/5 PIN SOCKET OUTLET POINT on SAME BOARD, controlled by One 1-Way Switch, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Point Wiring with 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavy duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 16 AMP, 3/5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, controlled by One 1-Way Switch, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, etc. as required at Site of Work will deem to be include in the Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relevant Item.

M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deem to be include in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Casing Capping will deem to be include in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

M&L Sub-main Wiring with 4-Run of 10 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 2-Run of 10 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 6-Run of Cable & 1-Run of PVC Casing Capping will deem to be include in the Quoted Unit Rate and the same also Measured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

S&F Modular Switch 6 Amp, 1-Module, Single Pole, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Modular Switch 16 Amp, 1-Module, Single Pole, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Modular Bell Push 6 Amp, 1-Module, Single Pole, Flush Type 230 Volt AC for operating Bell/ Buzzer and Connecting up, complete all as specified and as directed.

S&F Modular Socket Outlet 6 Amp, 2-Modules, 2 & 3 Pin, Combined, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Modular Socket Outlet 6/16 Amp, 2-Modules, 2 & 3 Pin, Combined, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Modular Fan Regulator, 2-Modules, Electronic Stepped type, Socket Size, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm 2 to 3 Terminal suitable for 230 Volt AC, 6 Amp and Connecting up, complete all as specified and as directed.

S&F Modular Bell, Bul-Bul Music, Electronic, Single Pole, Flush Type 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 1-Module, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 2-Modules, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 3-Modules, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 4-Modules, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 6-Modules, complete all as specified and as directed.

S&F White Modular Cover Plate with Frame, 8-Modules, complete all as specified and as directed.

S&F Modular Metal Flush Box, 1-Module, complete all as specified and as directed.

S&F Modular Metal Flush Box, 2-Modules, complete all as specified and as directed.

S&F Modular Metal Flush Box, 3-Modules, complete all as specified and as directed.

S&F Modular Metal Flush Box, 4-Modules, complete all as specified and as directed.

S&F Modular Metal Flush Box, 6-Modules, complete all as specified and as directed.

S&F Modular Metal Flush Box, 8-Modules, complete all as specified and as directed.

Taking down Ceiling Fan, Exhaust Fan of any description from any Situation, Sealing Cable End, Dismantling Blades and Removing to AGE E/M AF Chabua Store Yard at CHABUA, complete all as specified and as directed.

Supply & Hanging BLDC Ceiling Fan 1200mm Sweep 26 Watt, 230 Volt with Squire Case Induction Motor BEE 5 Star rated having 3 Blades holding Anti-suicide Down Rod and Providing Electric Connection from Ceiling Rose to Ceiling Fan Flexible Copper Conductor Cable of Suitable Size and Length, complete all as specified and as directed. MAKE : HAVELLS, Model No. FHCE15SWHT48/ BAJAJ, Model No. 251143 ENERGY 26 1200MM GLOSSY WHITE CF/ ORIENT, Model No. AEROQUIET BLDC

S&F Exhaust Fan 225/250mm Sweep, Steel body, AC Single Phase. 230 Volt with Blades, Frame and Louvers, Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed.

S&F Exhaust Fan 450mm Sweep, Steel body, AC Single Phase. 230 Volt with Blades, Frame and Louvers, Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed.

S&F LED Tube Light Fitting 1x20 Watt, 4 Feet, 230 Volt, Energy Efficient Epoxy Powder Coated CRCA Sheet, Box type Housing with Channel, Connector Block, etc. complete with all Accessories, Internally Pre-wired and Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length. The Luminaries should be Inter-connectable Luminaries for Aesthetically Appealing Down Light Application, complete all as specified and as directed.

S&F Recess Mounting Sport LED Light 13 Watt including 3 Core Flexible Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed. MAKE : HAVELLS, Cat Part No. LHEEAHPBPG1W0012 LED Arica COB 13 W 2700KWHT or Equivalent Model in Make : BAJAJ/ C&S/ PHILIPS (as approved by GE).

S&F LED Light Fitting, Wall Mounted Decorative type including 3 Core Flexible Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed. MAKE : HAVELLS, Cat Part No. Monarc Wall Light 2LS E14 Honey GLD LHFHAZCJTB1D005 or Equivalent Model in Make : BAJAJ/ C&S/ PHILIPS (as approved by GE).

S&F LED Luminaire 600x600mm, 35 Watt/36 Watt, 220 Volt AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders & LED Lamps suitable for Roof Ceiling, Connecting up with and including Twisted Copper Conductor Flexible Cable, 3 Core of suitable Size and Length from Ceiling Rose upto Light Fitting including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.

Supply & Hanging/ Fixing LED Ceiling Jhumar Monarch Chandelier with Hanging Arrangement 12LS E14 Honey GLD, Connecting up with and including Twisted Copper Conductor Flexible Cable, 3 Core of suitable Size and Length including Taking down/out Unserviceable Jhumar of any description from any Situations, complete all as specified and as directed. MAKE : HAVELLS, Model No. LHFHAZCNTB1D005/ JAGUAR, Model No. DCH-GLD-MX809812A or Equivalent Model in Make as approved by GE.

S&F LED Street Light Luminaries 25 Watt, New Generation, Environmental Friendly, Energy Saving, Long Life, made up of Pressure Die-cast Aluminium Housing with High Power LEDs as Lighting Source and Lens embedded PC Cover having Top Opening, with Separate Driver Compartment, IP-66 protected, Impact Resistance of IK-07, Providing Electric Connections including Taking down Unserviceable Street Light Fitting of any description from any Height, complete all as specified and as directed.

M&L Street Light Fitting Bracket made out from GI Pipe 25mm Bore (dia), Light Grade, not exc. 1.50 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x5mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works including Taking down Unserviceable Street Light Fitting Bracket of any description from any Height, complete all as specified and as directed.

M&L Street Light Fitting Bracket made out from GI Pipe 40mm Bore (dia), Light Grade, not exc. 1.50 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x5mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works including Taking down Unserviceable Street Light Fitting Bracket of any description from any Height, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 6 Amp to 32 Amp, Single Pole, 'C' Series, 50 Hz, 10 kA, 240 Volt, Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 10 Amp to 32 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F Miniature Circuit Breaker (MCB) 40 Amp to 63 Amp, Single Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 240 Volt, Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-Way, SPN, 240 Volt, Double Doors, Epoxy Based Powder Coated Painted, IP-42 Protected suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 12-Way, SPN, 240 Volt, Double Doors, Epoxy Based Powder Coated Painted, IP-42 Protected suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-Way, Vertical, TPN, 415 Volt, Double Doors, Epoxy Based Powder Coated Painted, IP-54 Protected suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going with 200 Amp rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Providing Electric Connection and Fixed, complete all as specified and as directed.

S&F MCCB 125 Amp, 4 Pole, 16 kA, 415 Volt, 50 Hz, IS-8828 marked including Incoming & Outgoing Cable Connections and Fixing to existing Panel Board and Connecting up including Taking down/ out Unserviceable MCCB, complete all as specified and as directed.

S&F Sheet Metal Enclosure, Single Pole & Neutral with Socket Plug Top with a 2-Pin and Earth Plug and Socket complete with and including 1 No. MCB 16 Amp, Single Pole, 10 kA, 240 Volt, Providing Electric Connection and Fixed including Taking down/ out Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure, Triple Pole & Neutral with a 3-Pin and Earth Plug and Socket complete with and including 1 No. MCB 32 Amp, Triple Pole, 10 kA, 415 Volt, Providing Electric Connection and Fixed including Taking down/ out Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

Supply & Installation Smart 3 Phase 4-Wire Dual Source Prepaid Energy Meter BIS:15884, installed at VTPN DB, Marked in existing Meter Board/ Floor Panels with Pre-payment capacity, Touch Keypad Based Digital having Current Range 10-60 Amp 415 Volt Accuracy Class 1.0 alongwith Parallel Horne Display Split Unit with Inbuilt Load Control Switch containing Provision for TOD and RTC, Inbuilt Feature to Sense the DG Mode through P LSI, Dual Source Registration wrt Grid as well as DG Supply and Dynamic Load Allocation Facility from Grid and DG, capable to Define for Tariff Slabs, Happy Hours and Holiday Definition and Providing Connections including Taking down Old Unserviceable Energy Meter of any description and Removing to AGE E/M AF Chabua Store Yard at CHABUA, complete all as specified and as directed.

Supply & Installation Vertical Type Water Heater (Geyser) Storage type of 25 LITRE Capacity, BEE 5 Star rated or Minimum Standing Loss of 0.511 kWh, 240 Volt, 50 Hz with Maximum Power Consumption of 1.5 KW, Dry Powder Fero Glass Line coating Technology for Inner Tank with Incoloy Heating Element, ABS Outer Body, complete Accessories, Providing PVC Connector Pipe 15mm in Size and 450mm in Length (02 No.) for Hot & Cold Water Supply, Fixing on Walls and Providing necessary Connections and Testing including Taking down Old Unserviceable Water Heater (Geyser) and Removing to AGE E/M AF Chabua Store Yard at CHABUA, complete all as specified and as directed.

Supply & Installation Vertical Type Water Heater (Geyser) Storage type of 100 LITRE Capacity, BEE 5 Star rated or Minimum Standing Loss of 0.511 kWh, 240 Volt, 50 Hz with Maximum Power Consumption of 3.0 KW, Dry Powder Fero Glass Line coating Technology for Inner Tank with Incoloy Heating Element, ABS Outer Body, complete Accessories, Providing PVC Connector Pipe 15mm in Size and 450mm in Length (02 No.) for Hot & Cold Water Supply, Fixing on Walls and Providing necessary Connections and Testing including Taking down Old Unserviceable Water Heater (Geyser) and Removing to AGE E/M AF Chabua Store Yard at CHABUA, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick buried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 450x450x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out Old Unserviceable Earthing of any description, complete all as specified and as directed.

EXTERNAL E/M SERVICES/ WORKS

Excavating in Trenches, not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Laying of Electrical Cable Lines, Water Pipe Lines, etc., Forming Surfaces to required Foundation/ Gradient and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps with Surplus Soil along the Route of the Electrical Cable Lines, Water Pipe Lines, etc in Soft/Loose soil, complete all as specified and as directed.

Disconnecting & Taking down/out Unserviceable LT Cable of any Size and any description from Trenches, Floors, Walls, GI Pipes, etc. including Serviceable (if any) Cables, Cable Joints, Bricks/Cable Protection Cover, etc. keep in Safe Custody for re-use, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 120 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevant Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 240 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevant Items.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying Sub-class ‘B’ Bricks of Size 230x115x75 mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade with Bend, laid in Under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable Size Mild Steel Flat Iron 40x4.0mm Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed. NOTE : Cost of Mild Steel Flat Iron 40x4.0mm Clamps, Bolts, Nuts, Washers, etc., will deemed to include in the Quoted Unit Rate.

Supply, Installation, Commissioning & Testing Factory Made (CPRI Certified/ Tested Manufacturer) OUTDOOR LT Panel, suitable to accommodate under-mentioned Accessories, Cubical Compartmental type, Double Doors both Side Openable with Hinged Doors and Locking Arrangement, Made out of 3.15mm thick CRCA Sheets, supported and fixed on Mild Steel Angle Iron 50x50x6mm Frame including Earthing Stud Labelling, Painting to all Internal and External Exposed Steel Surfaces with Powder Coating Paint (7 Tank/ Stage Process), duly fixed in Ground with Cement Concrete 1:2:4 (20mm graded Stone aggregates) Foundation of suitable Size (minimum Spaces 100mm in Each Side of Panel) with Danger Notice Plate 1.6mm thick Mild Steel Sheet, Vitreous Enamelled (White) with Letters Figures and Conventional Skull & Bones in Signal Red colour suitable for 3 Phase, 4-Wire system, 415 Volts grade with necessary Wiring with PVC sheathed Stranded Aluminum Conductor of appropriate Size and Length with and including fixing Lugs Bolts, Screws, etc., having Safety, Panel shall be Finger Touch Proof and it should have IP-20 Protection in Module Door Open Condition. Bus-bars shall be made of High Conductivity Copper of Rectangular Cross sections better suitable for Full Load Current for Phase Bus-bars and Half/ Full Rated Current for Neutral Bus-bar or as per requirements/ ordered, Bus-bars shall be supported on Non-breakable, Non-hygroscopic Epoxy Resin or Glass Fibre Reinforced Polymer insulated Supports and the Materials and Spacing of Bus-bars support should be same as per the Type Tested Assembly (TTA), All Bus-bars shall be provided in a Separate Chamber and all Connections shall be done by Bolting including Taking down Old Unserviceable Panel and Connected Items of any description, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick buried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of Size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 450x450x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out Unserviceable Earthing of any description, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

Taking up or down Steel (GI) Tubing/Pipe 25mm bore (dia) with Connections/ Fittings of any description from any Situations, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Taking up or down Steel (GI) Tubing/Pipe 40mm bore (dia) with Connections/ Fittings of any description from any Situations, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Taking up or down Steel (GI) Tubing/Pipe 50mm bore (dia) with Connections/ Fittings of any description from any Situations, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Taking up or down Steel (GI) Tubing/Pipe 80mm bore (dia) with Connections/ Fittings of any description from any Situations, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 32mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required, laid in Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 50mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required, laid in Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 63mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required, laid in Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 90mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required, laid in Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

S&F Gun Metal Globe/Gate Valve 25mm bore (dia) with Iron Wheel Head, ISI marked, screwed both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 50mm bore (dia) with Iron Wheel Head, ISI marked, screwed both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 80mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Chamber of Size 90x90x90 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 3.15mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed. NOTE : Cost of all Labours required for Necessary Earth Works will deemed to be include in the Quoted Unit Rate.

SCHEDULE OF CREDIT

DEDUCT 'TOTAL AMOUNT OF CREDIT' AGAINST 'SCHEDULE OF CREDIT' Bidders shall Quote the EQUAL AMOUNT (as per SCHEDULE OF CREDIT of Tender Documents) under Column 'UNIT RATE' (M) against Row No. 225

kabitaconstruction

M/s Singh enterprises