Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC C O DR UMASHANKAR SHARMA RANGIYA TINIALI NEAR RAIL GATE POST RANGIYA DIST KAMRUP ASSAM PIN 781354 | KAMRUP | ASSAM | 781354 | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹38.0 L+₹1.6 L (4.48%)Rejected-Finance KAHIKUCHI MARKET P O AZARA ASSAM 781017 | AZARA | KAMRUP | ASSAM | 781017 | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹39.9 L+₹3.5 L (9.74%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANGIA
GE Rangia C/O 99 APO Rangia
ADDITION/ALTERATION TO BUILDING NO. ET-223, ET-224 AND OTHER SANCTIONED WORKS AT HATTIGOR MILITARY STATION UNDER GE RANGIA
2022_MES_555454_2
8599/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
HATTIGARH
AS PER NIT
9 documents required · 9 mandatory
₹500
GE RANGIA
₹70,000
Yes
14 Dec 2022
31 Oct 2022
21 Nov 2022
31 Oct 2022
19 Nov 2022
7 Nov 2022
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
M&L for PCC (1:4:8) type D2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as per specified and as directed by Engineer-in-charge.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for brick work with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing complete all as specified and as directed by Engineer-in-charge.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 22x35x0.60mm with 4mm dia GI wire as suspender and including 4mm thick non-asbestos cement fibre board (decorative type) including fixing arrangement from steel truss of any type, complete all as per specified and as directed by Engineer-in-charge.
M&L precast pre-polished cement concrete chequered tiles 300x300x25mm thick set jointed and pointed in with grey cement and pigment laid over and including 20 mm thick screed bed in CM 1:6 in floorings, complete all as per specified and as directed by Engineer-in-charge.
S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.
M&L for Coloured Glazed ceramic tiles surface 350x 250x 7mm/ 450X 350X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed in CM (1:4), complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening complete all as per specified and as directed by Engineer-in-charge.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed by Engineer-in-charge.
S&F Solid PVC Double door frame of size 50 mm x 95 mm made out of 5 mm Prelam PVC Sheet reinforced with M.S.tube , supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engineer-in-charge.
S&F Factory made Solid PVC Moulded Door Shutter 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded prelam PVC sheet on the front face & 2 mm prelam PVC Sheet on back face with particle board core , supplying and fixing in frame at site complete as per specification and drawing complete all as specified and as directed by Engineer-in-charge.
All as per serial item no. 14 above but wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC Sheet panel. The wire gauge shall be wrapped on an additional square 8 mm M.S.Solid tube and this tube shall be welded to M.S.Tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed by Engineer-in-charge.
S&F anodised aluminium door using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 mm for each shutter with hydraulic door closer, mortice lock six lever vertical type mild steel 100 mm size, 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, 200 mm 2 Nos door handles and fittings, bottom panel and top panel fixed with snap beading rubber of suitable size including taking down old unserviceable one, complete all as per specified and as directed by Engineer-in-charge.
S&F 100 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-21, complete all as per specified and as directed by Engineer-in-charge.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.
S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
M&L for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay ,complete with glazing bars,dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
M&L for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay ,complete without glazing bars,dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
M&L for steel ventilators with top hung shutter including hinges, steel peg stay, complete all as per specified and as directed by Engineer-in-charge.
S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.
S&F Aluminium colour powder coated window frame of three track fixed with thrust bolt in walls by drilling and sliding shutter 40x18x1.29 or equivalent section for glass including 4.8 mm thick tinted glass fixed with rubber beading and bushes complete in two track and 0.36 mm dia and 1.4mm aperture stainless steel wire mesh fixed with screw and aluminium beading, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium anodised partition wall with aluminium frame of size : a) Single Groove Section: 82.50 x 38 x 1.20 mm thick b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading, tinted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels complete all as specified including dismantling old decayed/ broken plywood partition etc, complete all as per specified and as directed by Engineer-in-charge.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.
M&L for 15 mm thick rendering on fair faces of brick work or one side of lathing in cement mortar (1:4), and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L rendering 10 mm thick on other than fair faces of brick work or concrete block surfaces in cement mortar 1:6, surface to be finished fair & even without using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant priming paint applied over 2 mm thick wall care putty finished and smooth on wall complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer on wall surfaces complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment and applying three coats of white wash over a coat of primer complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
S&F Rolled Mild Steel sections confirming to Fe 410 - W as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as per specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
M&L 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC (nominal mix) type B-1, 1:2:4 (20 mm graded Agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves complete all as per specified and as directed by Engineer-in-charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) including edges fair finished surface of concrete flat complete all as per specified and as directed by Engineer-in-charge.
Rounding to edges of stone slabs one edges such as in steps & other similar situation complete all as specified and as directed by Engineer-in-charge.
M&L for granite (any type) slab of 20 mm thick laid with 15 mm thick CM 1:4 as in bedded in floor/wall and top of partition wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 25 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 25 mm bore, complete all as specified and as directed by Engineer-in-charge.
S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 20 mm bore, complete all as specified and as directed by Engineer-in-charge.
M&L for erection of two staging walls with double stable of standard size of height upto 3m all as per SSR specifications and drawing No. RNG/ TD/ 37 sheet NO 1/1 for PVC tank complete all as per specified and as directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
M&L for construction of manholes with 150 mm dia bore for connecting new drains making good to pipe, rendering, benching, forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished as required as per Drawing No.- CESZ/TD/40 sheet No. 56 (inner dimension 1m x 1m), complete all as per specified and as directed by Engineer-in-charge.
M&L for construction of septic tanks, exc, in ordinary soil, foundation in PCC (1:2:4), brick work in CM (1:4), RCC (1:1.5:3) Slab covers including RCC(1:1.5:3) precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 10 users as per drg. No. CESZ/2019/TD-115, sheet 1/1 to 4/4 , complete all as per specified and as directed by Engineer-in-charge.
S&F 20mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 20mm- 210 gms) and fixed in position complete all as per specified and as directed by Engineer-in-charge.
S&F 15 mm bore bib taps, fancy type, CP, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
S&F fancy type 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15mm angle stop valves cast copper alloy, fancy type, chromium plated with long shank and cup for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge.
M&L for brick wall Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth,complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including 'P' or 'S' trap complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand etc., complete all as per specified and as directed by Engineer-in-charge.
S&F PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.
S&F 32 mm dia waste coupling brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-charge.
S&F 75mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as per specified and as directed by Engineer-in-charge.
S&F 75 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.
S&F 110 mm dia bore PVC (SWR) junction (single T) equal or un-equal, complete all as per specified and as directed by Engineer-in-charge.
S&F PVC (SWR) 110 mm bore bends complete all as per specified and as directed by Engineer-in-charge.
S&F PVC (SWR) 75 mm bore bends complete all as per specified and as directed by Engineer-in-charge.
S&F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as per specified and as directed by Engineer-in-charge.
S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (45 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge.
S&F brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as per specified and as directed by Engineer-in-charge.
S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as per specified and as directed by Engineer-in-charge.
S&F fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.
Removing excvated materials (soils) exceeding 250m but not exc. 500.00 m and deposited where directed at a level not exc. 1.50 M above the starting point in soil, complete all as specified and as directed by Engineer-in-charge.
M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.
S&F MS plates Fe-410-W(Gde-E-250) quality-B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolted or welded attachment, complete all as per specified and as directed by Engineer-in-charge.
S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base in flooring/ hard standing, complete all as specified and as directed by Engineer-in-charge.
M&L for 50 mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded stone aggregate) in sub base in flooring/ hard standing, complete all as per specified and as directed by Engineer-in-charge.
M&L for Machine cut kota stone slab flooring 15 - 18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed or bedding layers in CM 1:6, complete all as specified and as directed by Engineer-in-charge.
M&L for Machine cut kota stone slab flooring 15-18 mm thick in riser of steps, skirting, dado and pillar laid including rubbing and polishing over 10 mm thick screed bed or bedding layers in CM 1:4, complete all as specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC (nominal mix) type-B-1, 1:2:4 (20 mm graded Agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs etc. complete all as per specified and as directed by Engineer-in-charge.
M&L for reinforced cement concrete (RCC) (nominal mix) type-B-1, 1:2:4 (20 mm graded Agg) as in Columns, pillars, piers, posts and struts, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC (nominal mix) type-B-1, 1:2:4 (20 mm graded Agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC (nominal mix) type-B-1, 1:2:4 (20 mm graded Agg) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as per specified and as directed by Engineer-in-charge.
M&L for damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) mix type B-0, 40 mm thick, complete all as per specified and as directed by Engineer-in-charge.
M&L for form work for side of pillars, posts, columns & similar works vertical or batter complete all as specified and as directed by Engineer-in-charge.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as per specified and as directed by Engineer-in-charge.
M&L for form work for side of concrete footings, foundations beam, base of columns, plinth beams & similar works vertical or batter complete all as specified and as directed by Engineer-in-charge.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as per specified and as directed by Engineer-in-charge.
'M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation, complete all as per specified and as directed by Engineer-in-charge.
Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.
M&L for 35 mm thick, 2nd class hard wood, plain, framed paneled shutters (any number of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers etc complete all as per specified and as directed by Engineer-in-charge.
M&L 35 mm thick second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of member (Bottom 250mm, stiles 100mm, top 120mm & lock rail 160mm wide) as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium alloy 300 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks double layered ISI Marked (cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
S&F vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge.
S&F chromium plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 m long Easy Flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.
M&L for concrete bed 1:3:6 type C2 (40 mm graded stone aggregate) to 100 mm dia. drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as per specified and as directed by Engineer-in-charge.
Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge.
S&F mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-in-charge.
M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as per specified and as directed by Engineer-in-charge.
Supply only chain-link MS galvanised fencing, mesh size 50mm squre, dia of mesh wire 3.15mm, complete all as per specified and as directed by Engineer-in-charge.
Fixing only chainlink fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire, complete all as per specified and as directed by Engineer-in-charge.
S&F Mild Steel Round Bar 10mm dia (Gde - I, IS-432) as in Stiffener to Chain Link Fencing including necessary cutting, bending, hoocking, binding etc., complete all as per specified and as directed by Engineer-in-charge.
S&F Mild steel screw bolts of 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer not exc. 10 cm complete all as specified and as directed by Engineer-in-charge.
M&L for Framed work as in doors or gates of any section (solid/hollow) with gusset plates, rails, braces, flat iron etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other rivering, running rails and uides) and hanging; also fastening and fixing complete using Fe-290(Gde E-165), complete all as specified and as directed by Engineer-in-charge.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub bases, floor/pavinging complete all as specified and as directed by Engineer-in-charge.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 of 60 mm thickness of M-35 grade with grey cement and pigment including dismantling & removing old unserviceable paver blocks, complete all as per specified and as directed by Engineer-in-charge.
M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick plastic laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly for one light point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.
All as per serial item No. 121 above but for one fan point controlled by one switch.
All as per serial item No. 121 above but for one 3 pin 5 Amps socket on independent board.
All as per serial item No. 121 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket on independent boards.
Supply and fix switch piano flush type, 6/5 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch socket combination 6 Amp 5 pin flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch socket combination 05/16 Amp 6 pin flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 240 Volts 40 Amps breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed by Engineer-in-charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete all as specified and as directed by Engineer-in-charge.
Supply and fix wall mounted fan swing type AC single phase 230/240V of size 400 mm sweep, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair double door sheet metal enclosure powder painted for MCB SPN 8 way 240 volt DB with din rail and bus bar including making good to the disturbed surface matching with the existing including taking down old unserviceable one, complete all as specified and as directed by Engineer-in-charge.
S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep complete all as specified and as directed by Engineer-in-charge.
Supply, fixing & testing of 10 Sqmm 2 core XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 Volts grade including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-charge.
S&F 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm laid in trenches etc. complete all as per specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no. 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Supply and laying 3 layer PPR Pipes 32 mm dia ( PN 16/ SDR 7.4) with all fittings laid in trenches/fixed to walls including fittings & testing, complete all as specified and as directed by Engineer-in-charge.
Supply and laying 3 layer PPR Pipes 25 mm dia ( PN 16/ SDR 7.4) with all fittings laid in trenches/fixed to walls including fittings & testing, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing PP-R Gate valves (brass insert) suitable for PP-R pipe of outer dia 32 mm complete all as per specified and as directed by Engineer-in-charge.
Supply and fixing PP-R Gate valves (brass insert) suitable for PP-R pipe of outer dia 25 mm complete all as per specified and as directed by Engineer-in-charge.
Making connection of PP-R distribution branch with PP-R main of 16 to 40 mm size by providing and fixing tee including cutting and making fusion joint etc. complete all as specified and as directed by Engineer-in-charge.
Supply and install Hi-wall split type air conditioner (AC) units indoor/outdoor complete with cordless remote control unit and with in-built air ioniser and plasma filter for better indoor air quality of capacity 1.5 ton 5 star rated, complete all as specified and as directed by Engineer-in-charge.
S&F 4 KVA capacity of volatge stabilizer for automatic operation, single phase, naturally air cooled, designed for input voltage variation between 170V to 270V with output volatge stabilized at 230V with accuracy of +/- 2.5%, complete all as specified and as directed by Engineer-in-charge.
Supply and fix 16 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 02 way single door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA rating, 'C' curve, complete all as specified and as directed by Engineer-in-charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps for AC point, complete all as specified and as directed by Engineer-in-charge.
M&L for sub main wiring two run of size 6 sqmm PVC insulated electric power cable (heavy duty) 1100 volts grade with stranded copper conductor with 6.0 sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (two run of 6 sqmm cable and one of 6.0 sqmm wire and one run of PVC conduit / casing caping will be measured as one unit), complete all as specified and as directed by Engineer-in-charge.
M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick plastic laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly for one 3 pin socket outlet 5 AMPs on same board, complete all as per specified and as directed by Engineer-in-Charge.
Supply and fix socket outlet, 3 pin 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-charge.
S&F LED light fitting 1x9W /1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 4 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply, fixing & testing of 6 Sqmm 2 core XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100Volt grade, complete all as specified and as directed by Engineer-in-charge.
Supply laying GI pipe 40 mm bore light grade for protection of UG cable complete all as specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no. 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs), complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Supply and fix lamp holder, PVC/Polycarbonate type with back plate including 10 watt LED bulb complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
M/s Nice Traders
M/S Trio Engineers And Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .