Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹24.6 L+₹70,000 (2.93%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹25.1 L+₹1.3 L (5.28%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹25.6 L+₹1.7 L (6.99%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹26.5 L+₹2.7 L (11.1%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar PIN-143001
CERTAIN REPAIR TO JCOs AND ORs MD ACCN UNDER AGE B/R-I AT GE AMRITSAR CANTT
2022_MES_544257_1
GE/ASR-40/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Amritsar
Class D , category ai
8 documents required · 8 mandatory
₹500
GE Amritsar
₹60,000
Yes
12 Dec 2022
8 Aug 2022
6 Sept 2022
8 Aug 2022
5 Sept 2022
23 Aug 2022
Amount
Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris,rubbish to a distance exceeding 400metres but not exceeding 500metres ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for brick work but except bricks , using serviceable bricks obtained from demolition , straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement including taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out of MoD land ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out of MoD land ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement includingTaking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out of MoD land ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer and putty as required on walls including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for preparation of new plastered surfaces and applying two coats of white wash over coat of primer on ceiling including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Supply and Fixing in repairs Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs vitreous china squatting pan of Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including making good the dismantled portion to match with existing surface of floor ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs 10 ltrs capacity PVC valveless syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia comlplete ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs vitreous china wash hand basin white with flat back type size 550mm x 400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs PVC connection pipe 15mm dia 600mm long with brass check nut at both ends comlete ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs stop valves brass chromium pltaed 15mm dia with long shank and cup concealed type ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs chromium plated stop valve 15mm bore fancy type screwed down for high pressure ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 915mm x 460mm with bowl size 410mm x 310mm x 160mm ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs stainless steel kitchen plate rack size 900mm x 750mm x 300mm deep made out of 1mm thick sheet including fitting arrangement ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing for galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor ; including disconnecting , taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm , including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge ; complete all as specified and directed by the Engineer in Charge.
Supply and fixing for galvanized iron steel tubing medium grade 20mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor ; including disconnecting , taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm , including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge ; complete all as specified and directed by the Engineer in Charge.
Supply and Fixing in repairs for 100mm dia CP grating with or without hinge type or hole type ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs CP shower rose fancy type with CP arm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs PVC coating curtain rods 20mm dia including brackets to hold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.14 mm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs for aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs for brass chromium plated soap dish fixed with screws to walls ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs CP bib tap 15mm dia long body screw high pressure for iron pipe ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs rotational moulded polythene, triple layers, water storage tank 1000 Litres capacity,ISI marked, closed top, cylindrical, hoisted and fixed in position with & including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 , including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs PVC waste pipe3 2mm dia suitable for WHB/Sink ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkhats or frame without taking of shutter from the frame of any description size exceeding 1.5Sqm and not exceeding 4Sqm and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down chowkhats or frame without taking of shutter from the frame of any description size not exceeding 1.5Sqm and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down shutter any description of size exceeding 1Sqm and not exceeding 2Sqm and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down shutters of any description exceeding 1Sqm & not exceeding 1.5Sqm each and refixing in the same opening ; complete all as specified and directed by the Engineer in Charge.
Supply and Fixing Godrej type cupboard shutter 1.00 mm thick fitted in frame of 35mmx35mmx6mm thick including necessary fitting such as handle , lugs, locking arrangement and including one coat of primer and n.exc 2.00 sqm area of cupboard ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing for pressed steel frames for Doors of size 125mm x 60mm with one or more rebates, made out of 1.25mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate etc and tarring to inner surfaces (surface in contact with concrete/brick surface) of chowkhats and hinges , including one shop coat of red oxide primer to door frame at contractors workshop ; with & including filling of back of chowkhats with PCC 1:3:6 type C0 (using crushed stone aggregate) & filling hold fast with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum six number of each frame ) ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels.Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 35 mm thick glazed and Skelton door shutters Second class hard wood open rebated prepared to receive in SSR part-I class 8 (a) glass gage dividing in squares size of member as per specified and Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Box type steel window double shutters (both Glazed & Gauzed shutters) made of ERW tube P - section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass with & including Sheet glass, SS wire cloth, fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by the Engineer-in-Charge :- (a) Hold fasts 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintel hinges size 75mmx12mm - 2 Nos per leaf (g) MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly. (h) 3mm thick clear sheet glass 3 nos per glazed leaf of reqd sizes glazing with oil putty. (j) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to each gauged shutters of window. (k) Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and (l) Repair all the damaged surfaces around window with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass with & including 3mm thick Sheet glass glazing with oil putty, MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly, fixture and fittings like as Stopper, Cleat, Pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-1019/08 sheet 1/3 to 3/3 dt 01 May 2008 , including Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and repair all the damaged surfaces around ventilators with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Supply and Fixing Aluminium handles 150mm long, cast type anodised ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Aluminium anodised barrel tower bolt 150mm long ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.
Supply and Fixing butt hinges medium weight cold rolled stainless steel complete size 100mm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane including hacking out old brocken glass ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 3mm thick figured glass pin head type, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sqm in each paneincluding hacking out old brocken glass ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for preparation of undecorated steel or iron surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for 6 to 7mm glazed ceramic coloured wall tiles 450mmx300mm thick on vertical surfaces such as skirting and dados etc shade as approved by Engr-in-Charge set and jointed in neat cement slurry and pointed in coloured cement to match over & including 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc shade as approved by Engr-in-Charge set and jounted in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding ; Complete all as specified and as directed by Engineer-In-Charge.
Supply & fixing 18 mm thick solid PVC ply of 1st quality of apprvoed colour fixed with screws, solvent cement / adhesive to make kitchen cabinate, shelves and cupboard shutters/shelves ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing in repairs for 5 mm thick solid PVC ply as in back side of kitchen cabinet etc ; Complete all as specified and as directed by Engineer-In-Charge.
Supply & fixing in repairs for 18 mm thick solid PVC ply of 1st quality with one side of apprvoed colour fixed with screws, solvent cement / adhesive to make kitchen cabinate, shelves and cupboard shutters/shelves ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing in repairs for 40 mm long hinges self closing type hydrulic type ; Complete all as specified and as directed by Engineer-In-Charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.
Supply and Fixing in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and as directed by Engineer-In-Charge.
Labour for Cutting or uprooting grass on roofs, removing rubbish off the premises, cleaning surface and preparing to receive new plaster ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for flush pointing to brick tiles laid flat in cm 1:4 with 5% crude oil including racking out joints and pointing to brick tiles ; Complete all as specified and as directed by Engineer-In-Charge.
Material and labour for remove all loose gravel cement mortar, dirt ,oil,grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. repairs all jointss/pointing with cement mortar 1:3 and cracks with highly elastic bituminious cold applied putty tarplastic->having penetration after setting upto 8mm. Levelling of surface to give proper slopwill be done as per site requirement with shalipatch/equivalent cold applied, Bituminious mortar & cold emulson cum water proofing liquid. Created SSD condition on surface with water prime the surface with acrylic modified Liquid Bitumen Membrane mixed with portable water in the ration of 1:1 and applying @400 gm per sqm ( As per surface condition). Applying first coat of Modified Liquid Bitumen Membrane having elongation 200 % conforming to ASTM -C -412 & having crack bridging of 8mm conforming to ASTM-C836 with tensile straight after 7 days 0.50mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consuption of of 700 gm per sqm. Lay Geotex of 45-50 GSM/Fibre mesh simultaneously and paist it properly with overlap of 50mm. Allow the first coat to dry for 10-12 hrs. Apply 2nd coat on qured first coat with consuption @700 gm per sqm in opposite direction on first coat by brush or roller . Allow it to dry for 10-12 hrs after applying 2nd coat with consuption @700gm per sqm. Ensure final curing time of 36 hrs before allowing /carrying out any furthe work. Conduct ponding test after min 7 days applying two coats of UV Resistand Elastomeric Exteirior Acrylic Weather resistant water proof coating of liquid membrane having elonation of 300% after curing of 14 days conforming to ASTM D-6083- for U V Protection of Bituminious Elastomeric Acry6lic Emulsified Liquid Membrance to give long life and prevent its deterioration from sunlight ; Complete all as specified and as directed by Engineer-In-Charge. Note :- Applivation of water proofing treatement will be done by Authorised Applicator under company supervision . Company authorised applicator will submit authorisation and warranty letter for work done for 05 years as per work procesure adopted as per guidance from campany's side
Demolition of cement Concrete of in sunken floor exceeding 15cm thick (above ground level) and disposing off the rubbish to a distance exceeding 50 mtr but not exceeding 100 mtr away to low lying area ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement with WPC ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate 25 mm as in sunken portion finished even and rough ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for cleaning of dust & dirt , removal of all loose dirt / material & applying heat torch gun over bitumen to get smooth plain finished surface and providing & applying APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to eiher side ; complete all as specified and directed by the Engineer in Charge.
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store all fittings ; Complete all as specified and as directed by Engineer-In-Charge
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including taking down eaves gutters and rain water pipes; Complete all as specified and as directed by Engineer-In-Charge
Supply and Fixing 110mm bore PVC (SWR) bends any radius With access door ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement ; Complete all as specified and as directed by Engineer-In-Charge.
ESS KAY BUILDER
m/s. gopal krishan
M/s. M Company
BISHAN DASS
M/S GHUMAN BUILDERS
m/s inder construction co
M/S RASHPAL CONSTRUCTION CO
B.J.CONSTRUCTION CO
MAAN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .