CA NO GE/H 34/2020 21

Amount

Demolition of plain cement concrete (unreinforced) of any description and any position not otherwise provided complete all as specified and directed by Engr-in -Charge.

Taking down Chowkets or frames with shutters without taking off shutters from frames exceeding 1.50 Sqm but n exc 4.00 Sqm complete all as specified and directed by Engr-in -Charge.

All as per item No 2 here in before but not exceeding 1.50 Sqm.

Taking down shutter (without taking off chowhkats) of any description not exc. 1.00 sqm each carry out necessary repair work ( carpenter work) for smooth functioning and refixing in same opening complete all as directed.

Taking down shutter (without taking off chowhkats) of any description exc 1 Sqm and not exc. 200 sqm each carry out necessary repair work ( carpenter work) for smooth functioning and refixing in same opening complete all as directed..

S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part II complete all as specified and as directed by Engineer-in-Charge.

S&F 28 to 30 mm thick (stiles)factory made solid PVC Flush Moulded door shutter wth 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face &2mm plain colour PVC sheet on back face, supply & fixing in frame at site as per specification and drawing.

M&L for 2nd class hard wood plain solid, straight chowakhats and frames, wrought , framed rebated on the solid rounded or chamfered, put together with glue pinned at joints supplied and fixed complete all as specified.

S&F 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels both side laminated, commercial type on both sides complete all as specified.

S&F 35 mm thick 2 nd class hard wood glazed and Skelton shutter open rebated and prepared to receive glass or gauge etc. divided into squares with plain chamfered or rounded metered beads complete all as specified.

& F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed. (Note: The tiles shall be measured and paid seperately under respective item of schedule)

S&F 150mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified.

S&F 125 mm long aluminium anodised, cast type handles and fixed complete all as specified.

S & F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S&F MS work as in bands, straps, hold fasts, wind ties etc, Fe-290 Gde E-165 conforming complete all as specified and directed

M&L aluminium anodised coloured powered coated frame work as in partition wall/door /chawkhats/ window shutters/ deco grills using any suitable section conforming to IS-733 and IS-1285 amd coating grade A-153 confirming to IS-1868 fixed with rawl plug and screw or with fixing clips with expansion hold fasteners including necessary jointing cleats, glazing clips, rubber packing anodised aluminium map beading packing anodised aluminium map beading screws, anodised aluminium fittings etc gap of junction at top, bottom & slides filled with PVC/Neoprene felt, handles etc complete all as specified.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately )

S&F toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed.

S&F in repairs steel window with side hung shutter including projecting/box type hinges enluding steel handles steel peg stay complete with glazing bars, dovetailed or welded etc complete all as specified.

S&F in repairs steel ventilator top hung shutters including steel handle, peg stay and box type hinges complete.

S&F in repairs Mild Steel framed work as in grill/grating guard bars etc ends of bars shouldered and or reverted complete all as specified.

M&L for 18/19 mm thick prelaminated particle board (MDF), interior grade, prelaminated both sides with decorative choice lamination fixed with screws to frame work complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board (MDF), interior grade, prelaminated both sides with decorative choice lamination fixed with screws to frame work complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No 3, aluminium (Die cast )body universal type, suitable for door shutters of 851 to 1000mm in width and weight between 36 to 60 kg and fixed.

S&F 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 100 mm long butt hinges medium weight mild steel alloy with galvanised .

S&F aluminium anodised, barrel tower bolts of extruded section and length of bolt 75 mm complete all as specified.

S&F in repair 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F in repair Mortice lock with two no keys & plate, vertical type, size 75 mm of brass 4 levers complete all as specified.

S&F in repairs night latches 4 levers 100mm brass with key in triplicate complete all as specified.

M &L for magnetic catches with brass body and striking plate including letting in and fixed.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified.

S&F 40mm wide 6 to 3 mm thick rubber beading fixed to door shutter with nails as in repair all as specified.

All as per ser item no 34 here-in before but 50mm wide and 6 to 3 mm thick tapered.

M&L for 40 mm dia cup board knob fixed with nut screw and washers of brass complete all as specified.

S&F 75 mm size hasp and staple mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified.

S&F Continuous piano type hinges stainless steel 30 mm flap size complete all as specified and as directed.

S&F brass 4 levers locks, drawer grade I, size 50mm complete all as specified.

S&F of 100mm long aluminium handles, cast type stove enamelled black complete all as specified.

M&L Cutting holes brick walls in exc half brick wall but not exc one brick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified. (Upto 4 storeys building)

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 using water proofing compound on concrete surface and finished even and smooth w&o using extra cement complete all as directed and specified. (WPC shall be measured and paid separately)

Supply only integral water proofing compound.

M&L for brick work using sub class 'B' bricks in CM 1:6 straight or curved on plan exc. 6m mean radius complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

All as per item No 47 above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for colour glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.

M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for 18 to 20 mm thick Udaipur green marble size not less than 600x600mm as in floors /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of the marble including 15mm thick screed bed in cement mortar 1:4 all as spfd and directed

Hacking out old broken glass (any thickness size,quility or description all as specified.

All as per srl item No 55 here-in-before but frosted on one side.

M&L for dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified.

S&F in repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joint fixed to wall incl clamp complete all as specified.

S&F PVC (SWR) bend any radius of 110 mm dia complete all as specified.

S & F in repair 32mm dia aluminium powder coated drapery rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as directed and specified.

Cutting of vegitable plants from roof, terrace, chajjas, walls etc digging out the foots and making good the surfaces in PCC 1:2:4 type B1 with surface finished to match complete including scaffolding upto 4 storey buildings etc.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /chajja/cladding fixed with self tapping screw as specified.

S & F in repairs solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F in repair false ceiling of 12.5 mm thick tapered edge M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as directed. Make : Armstrong / Gypboard / Anchorlam anchor (Note : The grid /frame shall be measured and paid for separetly.)

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building complete all as directed and specified.

M&L for 12 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as directed and specified.

M&L for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint over a coat of 3mm thick wall care elastomeric putty on wall surface upto 4 storey building all as specified.

M&L for preparation of new surface and applying three coat of white wash on ceiling all as directed and specified.

M&L for preparation of new surface and applying two coat of distemper on wall over 3mm wall care putty complete all as directed and specified.

M&L two coats synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces. complete all as specified.

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.

M&L prepration of old treated wooden surfaces of any description over 10cm girth or width, not otherwise specified and applying one coat of French polishing of any description including cleaning.Shade of the polish shall be as directed by Engineer-in-charge, complete all as specified.

S&F 3mm thick aluminium coated panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S& F Aluminium powder coated Grill (DECO grill DG 103 of 10 mm thick fixed with suitable 'F' Section (No 8584) 15.30 X23.40X 1.40 mm (minimum ) , fabricated and riveted to aluminium window / ventilators complete all as specified and directed .

M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) as in door fixing,benching/copings all as specified and directed.

J D ENTERPRISES

amtoindia

R D ENTERPRISES