Loading…
Loading…
Tender Value
₹3.6 Cr
EMD Value
₹7.3 L
Closing Date
2 Sept 2026, 1:30 pm5d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
(PH-31)
Above/Below/Par
SR DEN4
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
BID CAPACITY: Bid capacity will be evaluated for the works having an advertised value of more than 10 crores and all details required as per Annx-VI of IRGCC-2022 as amended from time to time to be submitted.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any P. Way work.
38 conditions · 10 needing a document upload
If a tender is accepted on the quoted rates of bidder which is below the advertised tender value, an additional performance security shall be submitted by the bidder as below: Bid quoted in % of Advertised Cost Additional Performance Guarantee (%) Below 0% to 5% (Inclusive) - NIL Below 5% - 5%
If the Earnest money is deposited by the bidder is in the shape of Bank Guarantee, it should be supported by proper stamp duty, rates as prescribed in section 13 & 24 of the UP-Stamp Act 2008 and amended from time to time at the time of submission of Bank Guarantee. ( Click here to download Format)
Please submit bank details of the firm / individual/ JV / partnership etc. i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, PAN Number and other necessary & relevant documents.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please furnish documents in support of your claim to fulfill the eligibility criteria as mentioned in the tender documents. Each page of the copy of documents / certificates in support of credentials, submitted by the you, shall be self-attested / digitally signed by the you or authorized representative of the your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating the offer or otherwise available in the offer.
Please furnish statement of deviations from tender conditions, if any.
Requisite documents proving technical eligibility criteria and financial eligibility criteria has been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works Matter).
Tenderers who is/are not borne on the approved list of the contractors of North Central Railway shall submit along with his/their tender as per clause 11 of IRGCC-2022 (Works Matter), as applicable.
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Joint Venture firms, if applicable in the instant tender, should submit all valid requisite documents and fulfil the stipulations as per clause 17 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firms, if bidding for the instant tender, should submit all valid requisite documents and fulfil the stipulations as per clause 18 of IRGCC-2022 (Works Matter),otherwise their offer will be considered incomplete and shall not be considered.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority. If any Tax/Royalty/Octori is quoted extra, the same will neither be considered for evaluation of the tender nor will be paid. However any changes in rate of taxes or any new tax /cess on Works Contract will be dealt according to clause 37 of IRGCC-2022 (Works Matter).
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Though no minimum eligibility criteria is specified for tenders below Rs. 50.00 Lakhs, tenderers are advised to upload documents so that their financial capacity, capability & past performance to undertake the tendered work can be adjudged during evaluation of their offer. Documents testifying tenderer previous experience for the type of job for which tender is invited with list of works carried out in the past and financial status should be produced along with the tender.
The provision of Construction and Demolition Waste Management Rule 2016 issued by Ministry of Environment Forest and Climate Change dated 29.03.2016 and published in the Gazette of India, Part - II, Section -3, Sub-section (ii) are binding upon the Contractor. Contractor shall implement these provisions at worksites, for which no extra payment will be payable.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-A. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items,schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form, unless specific deviation is quoted in the techno- commercial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto two years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
UDIN mandatory w.e.f., 1st Feb., 2019 for all Certificates: - It has been noticed that financial documents/ certificates attested by third person misrepresenting themselves as CA Members are misleading the Authorities and Stakeholders. ICAI is also receiving number of complaints of signatures of CAs being forged by non CAs. To curb the malpractices, the Professional Development Committee of ICAI has implemented in phased manner an innovative concept of UDIN i.e. Unique Document Identification Number. All Certificates are being made mandatory with effect from 1st February, 2019 as per the Council decision taken at its 379th Meeting held on 17th - 18th December, 2018
Balance sheet for the 4th previous year (i.e., FY 2022-23 or as applicable for the instance tender) as per para 10.2 of GCC-2022 and para 4.15.2 of the tender document shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e., FY 2025-26 or as applicable for the instance tender) has not been audited/yet to be prepared.
TRR(P) Work in TDL-GZB Section Under Sr. DEN/IV/PRYJ
6120262027-136~NCR
6120262027-136
Open
Works - General
12 Months
Prayagraj, Uttar Pradesh
₹0
₹7.3 L
10 Aug 2026
10 Aug 2026
19 Aug 2026
84 items across 1 schedule · ₹3,51,59,474.7 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | More than 40 m long rail panel | RM 120000.00 | — | 13.41 | 16,09,200 |
| 2 | Extra to Item no. 061012 for working on bridge | RM 4000.00 | — | 6.16 | 24,640 |
| 3 | For Through Rail Renewal work | TRM 60000.00 | — | 41.65 | 24,99,000 |
| 4 | For Through Rail Renewal work | TRM 60000.00 | — | 42.94 | 25,76,400 |
| 5 | Locations other than Ballasted Deck Bridge | Each 2400.00 | — | 438.94 | 10,53,456 |
| 6 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper 30000.00 | — | 22.82 | 6,84,600 |
| 7 | Lubrication of Elastic Rail Clips on PSC sleepers as per procedure prescribed in latest edition of IRPWM with Railway's grease. | ERC 400000.00 | — | 2.09 | 8,36,000 |
| 8 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC 30000.00 | — | 45.55 | 13,66,500 |
| 9 | Lubrication of gauge face of rail on curves, cross overs, points & crossings, turn-in curves and at locations as required with contractor's grease graphite grade "O" IS 408 and as directed. | RM 10000.00 | — | 3.31 | 33,100 |
| 10 | By using Railway's Grease graphite | Each 20000.00 | — | 28.99 | 5,79,800 |
| 11 | Rail section of 52Kg and above | Each 5000.00 | — | 106.31 | 5,31,550 |
| 12 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set 30.00 | — | 7,875.97 | 2,36,279.1 |
| 13 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM 60000.00 | — | 24.39 | 14,63,400 |
| 14 | With Railway's Hydraulic Rail tensor | TRM 5000.00 | — | 34.18 | 1,70,900 |
| 15 | Without Rail tensor | TRM 55000.00 | — | 32.67 | 17,96,850 |
| 16 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each 150.00 | — | 1,685.87 | 2,52,880.5 |
| 17 | For 60 Kg Rails | RM 60000.00 | — | 53.3 | 31,98,000 |
| 18 | For 60 Kg Rails | TRM 30000.00 | — | 73.34 | 22,00,200 |
| 19 | Anti-corrosive painting to weld collar for Thermit welded rail joints on track for old painted joints in normal corrosive prone area for any rail section with two coats of ready mixed bituminous black paint of reputed make confirming to IS:9862 latest version on welded area up to 10cm on either side including on the underside of rail foot by brush including surface preparation as per Railway's AT Weld Manual including lettering / weld numbering with approved enamel paint as directed Note: 1.Before painting, dust, dirt and flaked paint from the welded joint shall be removed thoroughly by scrapping with wire brush. Grease and oil shall be removed by use of appropriate solvent confirming to latest IS:1745. 2.Use of detergent followed by water washing should also be done to ensure removal of oil and grease apart from the greasing compound. 3.The paint should be procured along with the thinner recommended by the manufacturer of the paint. 4.No other thinner like kerosene oil should be used. | Each 500.00 | — | 21.78 | 10,890 |
| 20 | LWR / SEJ Board | Each 50.00 | — | 150.81 | 7,540.5 |
| 21 | Curve Post | Each 20.00 | — | 91.67 | 1,833.4 |
| 22 | Curve Board | Each 20.00 | — | 150.81 | 3,016.2 |
| 23 | Curve details, SE, Versine, Station Nos. etc. per station. | Each 20.00 | — | 49.85 | 997 |
| 24 | 60 Kg - 110/90 UTS - Outside Track | Each 2500.00 | — | 258.52 | 6,46,300 |
| 25 | 60 Kg - 110/90 UTS - On Running Line | Each 10000.00 | — | 329.59 | 32,95,900 |
| 26 | Outside Track | Each 5000.00 | — | 47.01 | 2,35,050 |
| 27 | On Running Line | Each 10000.00 | — | 62.36 | 6,23,600 |
| 28 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT 2400.00 | — | 116.79 | 2,80,296 |
| 29 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT 300.00 | — | 115.27 | 34,581 |
| 30 | For lead up to 500 metre. | MT 1200.00 | — | 356.93 | 4,28,316 |
| 31 | For lead beyond 500 metre and up to 1 Km. | MT 1200.00 | — | 459.92 | 5,51,904 |
| 32 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT 900.00 | — | 54.69 | 49,221 |
| 33 | From Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer. | MT 2400.00 | — | 86.39 | 2,07,336 |
| 34 | During period of traffic block | MT 7500.00 | — | 27.47 | 2,06,025 |
| 35 | Not involving traffic block | MT 500.00 | — | 23.01 | 11,505 |
| 36 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer | MT 700.00 | — | 90.7 | 63,490 |
| 37 | For lead up to 500 metres | MT 1000.00 | — | 277.85 | 2,77,850 |
| 38 | For lead beyond 500 metre and up to 1 Km | MT 1000.00 | — | 411.36 | 4,11,360 |
| 39 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT 6000.00 | — | 42.66 | 2,55,960 |
| 40 | Lead beyond 5 Km and up to 10 km | MT 50.00 | — | 200.54 | 10,027 |
| 41 | Lead beyond 10 Km and up to 20 km | MT 50.00 | — | 256.56 | 12,828 |
| 42 | Lead beyond 20 Km and up to 30 km | MT 30.00 | — | 324.75 | 9,742.5 |
| 43 | Lead beyond 30 Km and up to 50 km | MT 30.00 | — | 419.4 | 12,582 |
| 44 | Lead beyond 50 Km and up to 100 Km | MT 50.00 | — | 625.38 | 31,269 |
| 45 | Lead beyond 100 Km and up to 150 Km | MT 50.00 | — | 934.02 | 46,701 |
| 46 | Extra for every Km per MT beyond 150 Km over item no. 172047 | MT-Km 5000.00 | — | 3.15 | 15,750 |
| 47 | Lead up to 5 Km | MT 200.00 | — | 52.99 | 10,598 |
| 48 | Lead beyond 5 Km and up to 10 km | MT 200.00 | — | 94.18 | 18,836 |
| 49 | Lead beyond 10 Km and up to 20 km | MT 100.00 | — | 150.2 | 15,020 |
| 50 | Lead beyond 20 Km and up to 30 km | MT 100.00 | — | 218.39 | 21,839 |
| 51 | Lead beyond 30 Km and up to 50 km | MT 200.00 | — | 313.03 | 62,606 |
| 52 | Lead beyond 50 Km and up to 100 Km | MT 200.00 | — | 519.02 | 1,03,804 |
| 53 | Lead beyond 100 Km and up to 150 Km | MT 500.00 | — | 827.65 | 4,13,825 |
| 54 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km 40000.00 | — | 3.15 | 1,26,000 |
| 55 | From Truck / Trailer | MT 700.00 | — | 84.43 | 59,101 |
| 56 | From Truck / Trailer | MT 600.00 | — | 117.93 | 70,758 |
| 57 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT 400.00 | — | 351.11 | 1,40,444 |
| 58 | All type of PSC sleepers | MT 600.00 | — | 383.69 | 2,30,214 |
| 59 | P.Way fittings of all types and other similar loose items | MT 200.00 | — | 358.83 | 71,766 |
| 60 | Level crossings with asphalted road surface | Sqm 250.00 | — | 527.96 | 1,31,990 |
| 61 | Level crossings with concrete blocks road surface | Sqm 250.00 | — | 479.76 | 1,19,940 |
| 62 | Level crossings with any other type of road surface | Sqm 250.00 | — | 431.56 | 1,07,890 |
| 63 | 80mm thick blocks of M-35 grade for medium traffic. | Sqm 300.00 | — | 1,337.36 | 4,01,208 |
| 64 | 120mm thick blocks of M-40 grade for heavy traffic. | Sqm 200.00 | — | 1,895.74 | 3,79,148 |
| 65 | Manufacture of flared portion of Guard Rail by cutting and bending to required shape & RDSO's approved drawings. Note: (1) Rails shall be supplied by Railways. (2) One set consists of two rails i.e. both left and right. | Set 30.00 | — | 3,713.58 | 1,11,407.4 |
| 66 | Providing and fixing of flared portion of guard rails of any rail section over PSC sleepers including fixing of with all fittings, including leading of rails and fittings, squaring and adjusting spacing of sleepers as required, providing nose blocks duly cutting wooden blocks supplied by railways and fixing it with bolts of 16mm dia as directed complete and finished as per RDSO's approved drawing. Note: 1.One set consists of LH & RH side rails of one end. 2.Required P.Way fittings will be supplied at SSE stores depot. | Set 30.00 | — | 3,427.8 | 1,02,834 |
| 67 | Drilling holes 25mm to 40mm dia. with drill twist in the foot of guard rails for fixing guard rails on bridge as directed. | Each 150.00 | — | 61.03 | 9,154.5 |
| 68 | Drilling of 25mm to 40mm dia. holes in PSC sleepers with suitable rotary hammer / drilling machine at indicated location for fixing of guard rails on bridges & its approaches as per approved drawing and fixing of contractor's HDPE dowels and adhesive of approved quality to Drawing no. RDSO/T-3002, procured from RDSO's approved sources with contractor's materials and consumable. | Each 100.00 | — | 316.17 | 31,617 |
| 69 | Renewal of existing guard rails of all rail sections on bridge portion over wooden/PSC/steel channel sleepers excluding flared ends duly leading new guard rails including cutting of rails, drilling holes to the guard rails as required and as per drawings, refixing with all fastenings, and leading back the released rail, stacking at nominated place clear of infringements with all leads & lifts complete and as directed. | TRM 30.00 | — | 205.8 | 6,174 |
| 70 | Dismantling of existing flared portion of guard rails of any rail section over PSC sleepers duly removing rails & fastenings and leading and stacking released materials at nominated place within free lead, clear of infringements, complete and as directed. Note: One set consists of LH & RH side rails of one end. | Set 30.00 | — | 1,918.27 | 57,548.1 |
| 71 | MS chequered plates 6 to 8mm thick including removal of existing chequered plates on Bridges. NOTE: Payment shall be made only as per weight of new Chequered Plate fixed. | Kg 5000.00 | — | 82.48 | 4,12,400 |
| 72 | Bilingual Whistle Boards for level crossing of size 600mm x 600mm of each board with back support frame welded to vertical post of MS T section of size 75mm x 75mm x 6mm x 3950mm | Set 10.00 | — | 7,333.9 | 73,339 |
| 73 | Speed Breaker / Rumble Strips Board of size 900 mm equilateral triangular shape and 600mmx200mm boards with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set 10.00 | — | 6,378.55 | 63,785.5 |
| 74 | Manned Level Crossing Indicator Board of size 900 mm equilateral triangular shape with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set 10.00 | — | 5,736.13 | 57,361.3 |
| 75 | Single Strip / Double Strip Level Crossing Road Warning Board of size 900 mm equilateral triangular shape and 900x300 board with back support frame welded to vertical post of MS T section of size 80mmx80mmx8mmx3650mm | Set 10.00 | — | 6,905.53 | 69,055.3 |
| 76 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each 20.00 | — | 6,066.05 | 1,21,321 |
| 77 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each 20.00 | — | 5,128.99 | 1,02,579.8 |
| 78 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each 20.00 | — | 7,723.13 | 1,54,462.6 |
| 79 | Hand Gloves Leather (Left Hand & Right Hand) | Set 2000.00 | — | 48.75 | 97,500 |
| 80 | Supply and fixing in position pre-cast cement concrete Fouling Mark as per approved drawing at station yard, duly painting the top surface and slopes with white enamel paint in two coats and inscribed letters with black of Fouling Mark, complete in all respects with all labour, materials including cement, tools and plants etc. | Each 50.00 | — | 476.92 | 23,846 |
| 81 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each 500.00 | — | 3,716.79 | 18,58,395 |
| 82 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour 300.00 | — | 794.59 | 2,38,377 |
| 83 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour 200.00 | — | 942.83 | 1,88,566 |
| 84 | Tractor with Trolley for local transportation or other misc. works. | Hour 200.00 | — | 200.69 | 40,138 |
| Schedule total | ₹3,51,59,474.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRSOD2022.pdf
ATTACHMENT
PCECirc103.pdf
ATTACHMENT
Letterfore-BG.pdf
ATTACHMENT
TD136.pdf
ATTACHMENT
IRGCC2022ACS11.pdf
ATTACHMENT
IRGCC2022ACS09.pdf
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
IRGCC2022ACS07.pdf
ATTACHMENT
IRGCC2022ACS08.pdf
ATTACHMENT
IRGCC2022Revised.pdf
ATTACHMENT
ACS6-GCC2022.pdf
ATTACHMENT
ACS1-GCC2022.pdf
ATTACHMENT
IRGCC2022ACS02.pdf
ATTACHMENT
IRGCC2022ACS03.pdf
ATTACHMENT
IRGCC2022ACS05.pdf
ATTACHMENT
IRGCC2022ACS04.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].