Provn of hot water supply for Bldg No P-87 and P-60 and 8 x exhaust fan in toilet, bathroom and cook house of Bldg No P-61 of 39 GTC at Varanasi

Amount

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (normal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light / fan / bell point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, socket, fan regulator etc including 1.5 Sqmm FR type PVC insulated unsheathed cable multi - stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed for light /fan/socket point.

S&F switch piano flush button single pole one-way 6 Amps, 240 volts all as directed by Engineer-in-Charge.

S&F ceiling rose surface Bakelite type 65 x 25 mm three terminals 240 volts.

M&L MCB, SP, 6 to 32 Amps single pole 230 volts, 10 KA complete of make as specified and approved.

S&F Heavy duty exhaust fan, 300 mm sweep, 1400 rpm copper wound 220 V AC with all accessories including louver shutters all as directed of Make - Havells model Turbo Power or equivalent Make of Crompton greaves/Havells/Khaitan.

S&F Heavy duty exhaust fan, 450 mm sweep, 1400 rpm copper wound 220V AC with all accessories including louver shutters all as directed of Make - Havells model Turbo Power or equivalent Make of Crompton greaves/Havells/Khaitan.

M&L for wiring for circuit /sub main wiring with 2 x 2.5 sq. mm + 1x1.5 sq mm earth wire with PVC insulated FRLS copper conductor single core in and including 20mm dia PVC rigid non metallic concealed / recessed conduit at required or directed by Engineer -in-Charge.

M&L for cutting hole in brick / stone masonry wall suitable for mounting 300 / 450mm sweep exhaust fan and rendering 10mm thick plaster using cement mortar 1:6 and finishing the hole complete including distempering the disturbed surface and matching with exiting colour all as specified and directed by Engineer-in-Charge.

Supplying, installation and testing of energy efficient five star rating electric water heater 25 liters 1.5 KW (Geyser), ISI marked including fixing the water heater (Geyser) on wall with and including nuts bolts/anchoring bolts and making water / electric connection and making good disturbed surface of wall to match the existing complete all as specified and directed of Make Havells model (Puro plus 5S) or equivalent make of Bajaj/Recold.

M&L for laying / fixing on wall GI pipe 15mm dia medium grade including all fittings and fixtures

M&L for laying / fixing on wall GI pipe 20mm dia medium grade including all fittings and fixtures.

S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fix.

S&F PVC connection pipe 450mm long with chromium plated fly nuts and suitable for 80 degree centigrade temp for inlet and outlet connection all as specified and directed.

S&F fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia.

S&F MCB Isolator 25 A single pole.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20A single pole MCB.

TECH-NIG COMPUTERS

CROWN ENGINEERING CORPORATION