Internal Painting of Qtr 17/T-IV Staff Qtr (AGM OP Residence) due to change in occupancy, BSNL Angarh Compound, Mirzapur under Varanasi BA

Amount

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

a) 20 mm dia (heavy type)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

a) Old work (one or more coats)

b) Two or more coats on old work

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

a) Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

a) One or more coats on old work.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge.

a) With cement mortar 1:4 (1 cement : 4 fine sand).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

a) 15 mm nominal bore.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

a) 150 mm diameter

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.

Cleaning of Toilet tiles with disinfectant, mopping etc all complete as per direction of E-in-C

Applying cement slurry admixed with water proofing chemical such as tapecrete or equivalent in proportion as recommended by the manufacturer to damp portion of wall in two coats all complete as per direction of E-in-C

P/FPTMT Prayag or Equivalent make Health Faucet as per direction of E-IN Charge

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 15 mm nominal bore C.P. brass 2 way bib cock of approved quality as per direction of Engineer-In- Charge.

Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : a) 100 mm inlet and 75 mm outlet

Providing and fixing 100 mm dia CP Jaali as per direction of Engineer-In- Charge.