SPECIAL REPAIR FOR REPLACEMENT OF OLD VINTAGE STREET LIGHT WITH LED LIGHTS, PROVISION OF MEDICINAL GAS SUPPLY SYSTEM FOR EMERGENCY AND CASUALITY WING AT MH SECUNDERABAD, PROVISION OF MOTORISED SLIDING METALIC GATE AND SPECIAL REPAIRS OF GI/DI/PPR PIP

Amount

Excavation in trenches not exeeading 1.5m wide and not exceeding 1.5m depth and getting out hard/dense and dense soll for laying of pipes/ug cable all as specified and directed by Engineer-in-Charge.

Returning and filling in soils including spreading, leveling, watering and well ramming in layars each not exceeding 25 cm thick all specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directred by Engineeer-in-Charge.

Supply and laying Galvanised steel water tubing medium grade with fittings such as Tees,beand,union,elbow, nipple,collor,sockets, reducer,clamps etc,fixed to wall and ceiling or laid in floor/surface etc and including taking down old unserviceable pipe line from its existing location all as specified and directed for the following sizes

25 mm dia

20mm dia

Supply and laying Galvanised steel water tubing medium grade with fittings such as Tees,beand,union,elbow, nipple,collor,sockets, reducer,clamps etc,laid in trenches,under ground etc and including taking down old unserviceable pipe line from its existing location all as specified and directed for the following sizes

80 mm dia

50 mm dia

25 mm dia

S&F gun metal gate valves ISI marked with iron wheel head and both ends screwed with both ends for GI pipe and fixed and complete all as directed by Engineer-in-Charge.

25 mm dia

50 mm dia

80 mm dia

Cutting existing CI /DI/GI pipes for alterations or additions if necessary done in postion with out taking taking down size up to 200mm dia bore

Cutting the existing road / Bldg Plinth Protection / PCC / any kind of hard standing straight by manual,depth and width not less than 60cm for pipes up to 100mm dia and filling back with excavated soil up to 75% road portion and 25% shall be made with cement concrete 1:2:4(using 20mm gradded stone aggregate complete all as specified and directed.

Design, Fabrication, Supply, Erection, Testing and commissioning of motirised sliding metallic gate with following specification and comprising of items as given below:-

(a) GATE WIDTH 11 MTR ( CLEAR OPENING 10 MTR). (b) 1 MTR FOR HOLDING PURPOSE. (c) TOTAL GATE LENGTH 11 MTRS. (d) GATE HEIGHT 7 FEET. (e) GATE FRAME SECTION 82MM X 147MM, 5MM THICKNESS -RECTANGULAR TUBE. (f) GATE VERTICAL SUPPORT - 82MM X 147MM, 5MM THICKNESS. FOR EVERY 1.8 MTR ONE VERTICAL SUPPORT COMES. (g) GATE HORIZONTAL SUPPORT - 82MM X 147MM, 5MM THICKNESS.FOR EVERY 3.5 FEET ONE HORIZONTAL SUPPORT COMES. (h) GATE BEAUTY PART 3.5 FEET HEIGHT , 1.8 MTR WIDTH ,3MM THICKNESS. CNC BENDING C- TYPE SHEET SURFACE LEVEL FIXING.IN THIS WAY TOTAL 11 MTR WIDTH 7 FEET HEIGHT. BOTH THE SIDE GATE SHEET COMES UNDER BEAUTY PART. (j) GATE BOTTOM SECTION WHEELS HIDING PLATE OF 150MM HEIGHT, 11 MTR WIDTH ,6MM THICKNESS. MINUS PLATE APPLIED . (k) GATE CIVIL BOTTOM SECTIONS 150MM X 80MM , 6MM THICKNESS I-BEAM. I-BEAM BOTH THE SIDE CIVIL GRIPPING PURPOSE, 50MM X 50MM,6MM THICKNESS. L-ANGLE FOR EVERY 2 FEET CONCRETE GRIPPING PURPOSE SUITABLE FISHING WING TYPE. (l) I-BEAM UPPER SIDE 32MM BRIGHT ROUND ROD WHICH TAKE CAPACITY OF 80 TONNE. (m) SAFETY HOLDING PILLARS 82MM X 147MM, 5MM THICKNESS RECTANGULAR TUBE, U-SECTIONS - 2 FEET OF CIVIL GRIPPING PURPOSE 8 FEET GATE HOLDING PURPOSE 4 SETS. (n) GATE STARTNG + ENDING SIDE 300MM X 300MM OPEN AND CLOSING TYPE LASER CUTTING WINDOW. (o) GATE ROLLER ADJUSTABLE LASER CUTTING SECTION 400MM X 300MM 6MM THICKNESS. IT COMES NEAR THE MOTOR, 1 SETS. (p) GATE ROLLER ADJUSTABLE LASER CUTTING SECTION 200 MM X 300MM, 6MM THICKNESS 2SETS (q) MOTOR BASEMENT ANGLE 40MM X 40MM, 5MM THICKNESS, MOTOR BASE STAND. DEPTH WILL BE 1.5FEET, WHERE AS WIDTH , 300MM X 300MM.

Note:(i) APPROXIMATE GATE WEIGHT UPTO 3500 KGS (The total value will be decided after taking the weight of the gate on weighing machine remaining all accessories). (ii) Quoted rate shall inclusive of transporting and crane holding and erection charges. (iii) Quoted rate inclusive of everything as required for proper fixing / functioning of Gate. (iv) Contractor should submit the detail drawing of the gate and take necessary approval of GE before placing order to the company/fabricator. (v) Complete gate to be painted with two coat of first grade synthetic enamelled paint over a coat of red oxide primer.Gate to be painted with spray gun. Quoted rate inclusive of the same. Make GANDHI AUTOMATIONS / SMART SENSE / FORTUNE AUTOMATIONS.

S&F WHEELS : WHEELS 6" WITH EN 19 MATERIAL with DOUBLE BALL BEARING ALONG WITH LASER CUTTING BRACKETS, EASIER REMOVABLE & EASIER FITTING. RUST PROOF MATERIAL, NON RUBBABLE and including all misc accessories complete all as directed by Engr-in-Charge.

S&F 90MM NYLON ROLLERS: TOP GUIDES WITH NYLON ROLLERS WITH OIL SEALED DOUBLR BALL BEARINGS AND EACH ROLLER HAS 2 SETS , WITH GI COATED LONG BOLTS ADJUSTABLE TYPE and including all misc accessories complete all as directed by Engr-in-Charge. .

Suppy, erect, install & testing of geared motor with following specifications i.e 3-ph,380v-415v,motor speed 42 rpm,rated outpower of motor 1000w, remote control operating distance 30 meters,remote controll mode-single button, output shaft height-58.5mm,output torque -85Nm, limit swtich-swtich, Noise <60 DB, duty cycle- S2,25 Minitues,Gate move speed 12 meter per minute and including necessary control panel and all miscellaneous accessiories as required for proper funtioning of the Gate complete all as directed by Engr-in-charge. Note: (a) Can be fitted between or behind (or even in front of) the gate postsSuitable for gate upto 30mtr opening. Gate Weight Max. upto 5000kg Environmental protection. working temp -20 to +50 C. rain Proof. The Kit weights upto 50Kg Apx.Over-load and Over-heat protecting function. Operates on Remote/switch. (b) With flashing lamp for notification of gate in operation. (c) Auto closing gate delay time adjustable. (d) Photocell - automatic return for resistance during closing gate. (e) Manual opening of the gates in the event of power failure. (f) Automatically locks the gate and can only be operated by remote and with key provided for manual operation Make Liv Future Model SD 1050/ Godrej/ as approved by GE.

Supply,test,laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts(Earthed) grade 3.5 core 25Sqmm, laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe/Tunnel/under ground/surface up to the termination point(as directed by Engr-in-Charge) with necessary end terminations with suitable size cable lugs, cable glands, fixing of lugs with crimping with tool, nuts, bolts etc

Supply and spread clean river sand as cable cushioning for protection of cable to be laid in treaches all as per SSR part- I complete all as specified and directed by Engineer - in - Charge. Note Punned thickness wil be measured for payment.

M&L brick protection with common burnt bricks, sub class'B' of size 230x115x75mm for cable protection complete all as specified and directed by Engineer - in - Charge.

M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly type .The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed make ASHLOK / INDELEC/JMV /TERCEL/True power

M&L for GI earth strip of size 32 x 6 mm for earth continuity complete

M&L Plain cement concrete type 1:4:8 (using 40mm graded aggregates) in foundations, filling and mass concrete

M&L Providing, Cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) plinth courses, parapets and railings upto 60 cm in height, copings, bed plates etc. and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary formwork

M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

All as per item No. 18 above but as in Columns, pillars, piers, posts and struts

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No.22 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth with out using extra cement as directed by Engr-in-Charge.

M&L Two coats of cement based paint over a coat of primer incl preparing new surfaces plastered or unplastered surfaces as directed by Engr-in-Charge.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L two coats of synthetic enamel paint over a coat of primer on new steel surfaces including preparation, exc 10cm in girth.

Removing excavated soil material exc. 250 m but n exc. 500 m and depositing where directed

Supply, fixing, testing and commissioning of 4+4 Oxygen Manifold with automatic control having top frame comprising of hight pressure copper pipe and with high pressure brass fitting made of high tensile brass, NRV and SS tail pipes and all other connected accessories as mentioned below : (a) Model SR450 series regulator. (b) Manifold outlet is 1/2 M NPT. (c) High quality brass master shut-off valve included. (d) Flexible stainless steel Teflon lined pigtails provided with all other gas services. (e) Staggered & vertical crossover headers include 24" flexible stainless steel pigtails. (f) Maximum pressure 3,000 psig. (g) Wall mounting brackets (h) Built to accommodate future expansion by adding optional header extensions.

Supply, install, testing and commissioning of IP 55 corroson resistance Oxygen control panel (semi automatic), trouble free functionality, easy to operate, dual line pressure regulator, one high flow regulator, 100mm dia diameter two hight pressure (0-250 Kg/Cum) included with all standard accessories like NRV and warning alarm and including all electrical connections complete all as required for proper functioning of control panel complete all as specified and directed.Make : Ramco or MR Engineers

supply, fixing, testing and commissioning of Vacuum pump compirses of 1 vacuum pump with motor, electrical switch gears and automtic controlling system, vacuum reservoir of capacity 300 Ltrs, valves and fittings with following specifications complete all as specified and directed. Vacuum Pump : Air Cooled Make : INGER-SOLE RAND or Equivalent as approved by GE Type : V244 Displacement : 32CFM Starting : No Load Motor : Crompton Greaves or Equivalent as approved by GE Capacity : 3HP, 3 Phase Speed : 1440 rpm Note:- Rate quoted shall be inclusive of necessary, electrical switchgear i.e. starters etc and suitable foundation for Vacuum Pump i.e., PCC, nut and bolt etc

Supply, Install, commissioning and testing compressed air system consists one Air Compressors with appropriate otors, electrical switchgear automatic switchover control system, air receiver, heatless air, dryer system, pressure regulators, with necessary valves and fittings of following specifications, complete all as specified and directed. Air Compressor: Oil Free Air Cooled Capacity : 35Cfm Cooling : Air Cooled Motor : Induction, Belt Driven Make : Crompton Speed : 1500 rpm Power : 5HP, 3 Phase Air Dryer : 1 Nos, Heat less type Make : Premier Capacity : 35Cfm Desiccant : Activated Alumina Receiver : 500Ltrs Make : ANESTA IWATA Note:- Rate quoted shall be inclusive of necessary, electrical switchgear i.e. starters etc and suitable foundation for Vacuum Pump i.e. PCC, nut and bolt etc.

Supply, install, testing and commissioning of Oxygen flow meter with humidifier and PL adaptor with CE and ISO certified should allow flow control within range of 0-15 l/min with inlet filter to prevent entry of foreign particles included with all accessories all as specified and directed.Make: Bharat Enterprises/MN Lifecare

Supply and fix ward vacuum unit wall mounted type with vacuum gauge, on/off knob allowing for quick restoration of a vacuum level including 600 ml jars of unbreakable, autoclavable and regulator with necessary tubing all as specified and directed.Make :Bharat Enterprises/MN Lifecare

Supply, install, testing and commissioning of 22mm Isolation valve manufactured as per ISO-13485 incl all accessories as specified and directed. Make : Conex/Medflo

Supply, install, testing and commissioning of 15mm Isolation valve manufactured as per ISO-13485 incl all accessories as specified and directed.Make : Conex/Medflo

Supply, install, testing and commissioning oxygen alarm system should indicate High / Low / Normal Gas pressure inside ICU incl all accessories as specified and directed. Make Make MN Lifecare/ equivalent as approved by GE

Supply, install, testing and commissioning of wall mounted double lock front mounted gas outlet IOL front loaded tube size 10 mm dia including all connected accessories specified and directed. Make: Medflo/radon/MN life care

Supply, fixing and testing with distribution of piping medical graded copper pipes. Pipes shall be solid drawn ,tempered seamiess, phosphorous doxidizer, nomarsenic and degressed for oxygen service distribution copper pipe should be Cu DHP grade half hard and manufactured as per BSEn :13348:2008of size 15mm dia, thickness 0.9mm including all fittings like bends, elbows, TEE, sockets, necessary jointing/ welding etc to walls, ceilings including necessary shaddle heavy duly at an interval of maximum 0.5 meter and painting with two caots according to medical gases colour code complete all as required for functioning.Make MEXFLOW/ equivalent as approved by GE

All as per Item No.39 above but for size 22mm dia, thickness 0.9 mm all as specified and directed.

M & L for supporting structure to gas pipe lines and oxygen cylinders etc , bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as directed

Taking down old u/s street light fittings of any watt ( tube light / T5 fittings only/solar/ SVL/Metal halide ) existing position on pole/ wall/ tower/ highmast tower , complete all as specified and as directed

Taking down serviceable street light fittings of any watt and type from existing position on pole/ wall/ tower including bracket / clamp and refix the same at new location in pole complete all as specefied and directed.

Taking out unserviceable junction boxes of any type or size for replacement from pole/wall and removing the same from site completeall as specified and directed

Taking out unserviceable service connection of any type or size for replacement from pole/wall/ OH conductor and removing the same from site completeall as specified and directed

Taking down old unserviceable post top lantern/bollard / Garden/ Gate light fitting of any watt and type from existing position complete for repair and replacement all as specified and as directed

Supply, fixing, connecting and testing LED post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity 1X35/40 watts, fixed to Gate piller / GI pipe in any position complete all as specified and directed. Make:- PHILIPS Cat Part No BGP161 LED2500/NW PSU 220-240V 7043 IN or CG MODEL NO LPTO 40 CDL/ Surya model SLEPT 36W -ETPP / Havells Cat No. RUBYPT35WLED757PSYMTOPC or Wipro cat No.LP07-501-XXX-57-CL.

Supply fixing connecting and testing decorative LED Bollard light with opal diffuser & aluminium reflector of 9 watt LED including necessary foundation as per manufacturer recomendation , nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge Make C&S Cat Part NoLTGLCW9WLED or SURYA MODEL NO SLEBL 9W BLK800 or wipro model LB 14-131-XXX-65-05

Supply, fixing, connecting and testing energy saving, environmental friendly long life Varsatile pressure die cast aluminium alloy for housing (heat sink) with IP66 protection road way light fitting with high power LED as light source of capacity 60 watts with warranty option of 2 years with suitable driver and cable gland for maintaining ingress protection with Epoxy powder coated siemens grey finish after phosphochromate treatment, Tempered protective toughened glass,thermal shock and impact resistant fixed to the housing with SS screws , High efficiency long life LED chip in modules with lumen efficacy of >140 lm/W with PC lens and system light output min 100 lumen /watt . Powered by Built-in electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection. CCT 5700, CRI>70, THD<10%, PF>.95, IP66, IK07.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +50 DEG.C; Input Supply Voltage Range:140-260 V, Frequency : 50-60 HZ, Driver

safety requirement standards :IS 15885-2-13, Test report to be submitted for Driver performance requirements as per IS 16104, for Photo bilogical safety norms as per : IS 16108, Certification as per LM 79 for Luminaire , LM 80 for LED Source, with all standard accessories etc, complete all as specified and as directed. Make: LUKER CAT NO: LST 60 or SURYA CAT NO: SLEUL60W IP66 (LXN) or Wipro cat No. LR02-671-XXX-57-XX. HAVELLS CAT NO : ENDURAPEARLPLUSSL60WLED757SASYTOPC

All as per item No.49 above, but 70/72 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: LUKER CAT NO: LST 72 or Havells Cat No. ENDURAPEARLPLUSSL70WLED757SASYTOPC, SURYA CAT NO: SLEUL72W IP66 (LXN) or Wipro cat No. LR02-781-XXX-57-G2.

All as per item No.49 above, but 90 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: LUKER CAT NO: LST 90 or Havells Cat No. ENDURAPEARLMAGNUMSL90WLED757PASYTOTG , SURYA CAT NO: SLEUL90W IP66 (LXN) or Wipro cat No. LR02-102-XXX-57-XX.

All as per item No.49 here-in-before but Flood light of high power LED as light source of capacity 200 watts.. Make: Make : BAJAJ CAT NO : BARFEG 200W, LUKER MODEL NO : LFLHL 200 or HEVELLS Cat No. JETAVALOURFL200WLED757PINTWBLTG, SURYA CAT NO SLEFEL200 WATT IP66 LUMOS II or Wipro cat No. LF20-272-060-57-G2.

All as per item No.49 here-in-before but Flood light of high power LED as light source of capacity 150/ 160 watts.. Make: Make : BAJAJ CAT NO : BARFEG 160W, LUKER MODEL NO : LFLHL 150 : Bajaj Cat No.BJFL 150W LED or Havells Cat No. JETAIRISFLS150WLED757PSYMLTG, SURYA CAT NO SLEFEL150 WATT IP66 LUMOS MAX or Wipro cat No. LF20-192-060-57-G2.

All as per item No.49 here-in-before but Flood light of high power LED as light source of capacity 120 watts.. Make: Make : , Bajaj Cat No.BJFL 120W LED or Havells Cat No. JETAIRISFLS150WLED757PSYMLTG, SURYA CAT NO SLEFEL120 WATT IP66 LUMOS MAX or Wipro cat No. LF20-132-060-57-G2.

All as per item No. 49 here-in-before but Flood light of high power LED as light source of capacity 100 watts.. Make: Make : Havells Cat No. JETAIRISFLS100WLED757SYMLTG, SURYA CAT NO SLEFEL100 WATT IP66 LUMOS MAX or Wipro cat No. LF20-122-060-57-G2. Notes for item Nos 49 to 55 :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection (In-built) of the drive shall not be less than 10 KV or equivalent model in philips or Wipro.

Fabrication and installation of GI pipe bracket made of medium Grade tubing of size 40 mm dia, duly bended by hot forgoing after filling of sand, length 1.20 mtr including providing two pair of MS flat strip clamps 40 mm x 4 mm with GI bolts nuts and washer complete all as specified and directed

Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit of dia 20 mm medium grade exclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified

S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs and glands, fixied on pole by means of 2 set clamps made out of MS flat iron complete all as specified and as directed.Make: Hensel/Syntex/C&S

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 4 core laid in trench /poles/on wall all as specified and as directed Make:Havells/KEI/Plaza

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trench /poles/on wall all as specified and as directed Make:Havells/KEI/Plaza

M&L cross arm bracing supports, clamp and back plate from structural steel section including nuts & bolts washer, welding, bending, cold or hot drilling holes for bolts in any shape or size as indicated or as directed and including of one coat primer, one under coat and one finishing coat of aluminium paint for making clamp to be used for fixing of flood light /street light on pole including taking down old u/s.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 METRE long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying Two Coats of Black Bituminous Paint Internally and Externally upto Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of Aluminium Primer (Externally from Top of Coping) including Writing MES Pole No. with Synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed including dismantling old u/s.

Excavating in Trenches, not exc. 1.50 METRE wide and exc. 1.50 METRE but not exc. 3.00 METRE in depth, for Foundation of Poles, etc. and getting out in hard/ dense Soil, complete all as specified and as directed.

M & L Plain Cement Concrete 1:3:6 Type C1 (20mm Graded Stone Aggregate) as in Coping of Poles, etc. including Formwork (as/if required), complete all as specified and as directed.

Material and labour for galvanized iron tubing 40 mm bore light grade with all fitting for hanging of ceiling fan / protection of cable /for fixing of garden light incl necessary clamp, bolt/nut if any and making hole on wall complete all as specified and as directed. (Make TATA, JINDAL,Prakash)

Supply and fix Solar LED street light of 30 watt capacity with in built solar panel on the top of the light, inbuilt nicl battery complete all as directed including taking down oldone . Make Luker Model No. LSTSOL30 / Philips/wipro

M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, HDPE pipe havy duty( Working pressure 16 kg/Sqcm) of size 50 mm dia in any length including jointing materials to carry LT UG cables of size upto 50 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed.

Supply and replace GI pipe fixed on the top of gate piller by 50 mm dia medium grade GI pipe of length 30 cm( 20 CM inside the piller and 10cm above the piller ncluding necessary cement work and making hole on GI pipe if required complete all as directed. Note: Quoted rate inclusive of making good of dosturbed suface including necessary painting to match with the adjoining surface.

Supply and fixing lantren of dia 60 CM for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole , made of MS pip medium grade dia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nos including two coat of aliminium painting over a coat of redoxide primer complete all as directed

Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for hanging of ceiling fan / protection of cable /for fixing of garden light incl necessary clamp, bolt/nut if any and making hole on wall complete all as specified and as directed. (Make TATA, JINDAL,Prakash)

Supply and fix HV ROUND 1.5 Sqmm copper cable 3 core 1100 Volt grade ISI Marked for connection of light complete all as specified

Srinivasa Consructions

Mavee Syndicate