PROVISION OF INTERLOCKING TILES AROUND OFFICERS QUARTERS AND PROVISION OF ROAD FURNITURE AND ROAD SIGN BOARD AT ICGS MUNDRA

Amount

Excavation over areas in soft/ loose soil n.exc 1.5m deep and n. exc 1.5m wide and getting out soil …etc all as specified and directed.

M&L Hardcore (Broken stone/ boulders) broken to gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered, rammed to a true surface all as specified & directed.

M&L for 100mm thick PCC 1:4:8 type D-2 with 40mm stone aggregate as in sub base all as specified & directed

M&L for sand filling under floor or in foundations including spreading, levelling, watered and consolidation in layers n. exc 25cm etc complete all as specified & directed.

M&L for 60mm thick, M-35 grade, machine pressed precast concrete interlocking paver block using grey cement and pigment of any shape & size confirming to IS:15658-2006 complete all as specified & directed.

M&L for precast cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate for Kerb stone, set in cement mortar 1:6 at side of interlocking paver block complete all as specified & directed.

M&L for prepation of new or previously treated/ untreated concrete surfaces of any description not othrwise described over 10cm width or girth and applying two coats of synthetic enamel paint in different tint over red oxide zink crome primer complete all as specified & directed.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over 15mm screed bed in CM 1:4 in floors complete all as specified & directed.

Removing excavated material exc.50 m but n exc. 100 m and depositing where directed

S&F Rubber speed breaker made from heavy duty tough rubber and polyethylene with high resistance wear & tear property. Best suitable height of 3" (75mm)for speed Restriction UVstabilized colours in black & Yellow combination. High reflective mark showing arrows in white colour are marked on both sides of yellow & black bumps. The two bumps Yellow & Black are both having end caps of contrast with two holes.The size of breaker is 375x50x500 with four holes. The whole breaker is fixed along with epoxy & hardener and Bolts.Supply with epoxy and hardner as required of company (DA-1008) (Make: Sinor,3M and Equivalent)

S&F Traffic Barricades (ABS PLASTIC) Traffic barricades/ barriers are portable in nature and designed to make barricading more effective, safe and more stable than drums or other traditional types of barricades .they are visually more substantial and command the antial and command the respect Base size 18", Height 40", Length 5' ,capacity to weight 60 kg . (Make Sinor,3M and Equivalent)

S&F Traffic Road Solar BLINKER solar based traffic blinker is ready to install compact modular unit and can be installed anywhere.the system is provided with 37W Tata BP solar panel and 40 Ainp-Hr Exide make maintenance free sealed battery. with solar panel. (Make Sinor, Equivalent)

S&F of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

S&F retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

MI ROOM

SPEED LIMIT (40)

LEFT HAND CURVE

RIGHT HAND CURVE

NO OVERTAKING

NO HORN

PEDESTRIAN CROSSING

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S&F Solar Delinators (1000x47mm) is made of polycarbonate and toughened aluminium alloy body.Hight-145mm,Diameter-80mm,Comprises of 4 super bright LEDs which give 360 degree viewing.Solar panel-2.5V,120mm(approx.) 1.25V rechargeable battery-1 No. (make:SINOR,Equivalent)

S&F metal tubular delinator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F Convex Mirror 800 mm made of PC material provided with suitable MS pipe post, duly painted as per site requirement, have clear & definite mirror image having 130 degree of viewing angle. It is unbreakable & stronger than glass.(Make : Sinor, Equivalent)

S&F Traffic Cones also called road cones,highway cones are cone -shaped markers placed on roads or footpaths to temporarily redirect traffic in a safe manner.they are often used to create separation or merge lanes or parking lots.Made of LDPE (Low Density Poly Ethylene)having UV stabilized florescent organ colour EVA (Ethyl Vinyl Accetate) is to increase flexibility.Four slots are provided on the top of cone for locking of hooks to fix plastic chain. Height of the cone -750mm,Weight 4300gms.square base 385mm.0ne reflective band of 6 inches width is used around the cone for reflectivity.(Make : Sinor, 3M,Equivalent)

M & L for preparing bituminous/ concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Hari Construction

M/s SK Traders

nidhi construction co.