Renewal of Sarhankhurd Sikandarpur road ODR (6)

Providing, laying, spreading and compacting stone aggregates of specific sizes 22.4-53 mm approved quarry gauge to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. complete as per MORT&H clause 404. including royality on materials, labour cess. GST shall be paid extra as applicable at the time of payment.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per MORT&H SI-503. including bitumen & labour cess. GST shall be paid extra as applicable at the time of payment.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.as per clause MORT&H SI No-510. including royality on materials & cost of Bitumen, labour cess . GST shall be paid extra as applicable at the time of payment.

Providing and laying of premix sand seal coat Type 'B' with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.as per MORT&H clause 511. including royality on materials & cost of Bitumen, labour cess . GST shall be paid extra as applicable at the time of payment.

Construction of Subgrade and Earthen Shoulders with Material Deposited from Roadway Cutting. construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (without Tippers) as per MORT&H SI-305. the compact thickness of each layer shall not be more than 250mm. including labour cess. GST shall be paid extra as applicable at the time of payment.