Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC | ₹1.6 Cr | L1 | Accepted-AOC L1 Bidder accepted. |
| 2 | L2₹1.8 CrRejected-Finance | ₹1.8 Cr | L2 | Rejected-Finance L2 Bidder |
| 3 | Rejected-Technical NEW PAHARGAON NEAR MUNICIPAL OFFICE GARACHARMA PO SRI VIJAYA PURAM 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | - | - | Rejected-Technical Not meeting NIT criteria |
| Sl No | Description | Qty | Unit | Island Agency L1 | THE REEF CONSTRUCTIONS L2 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
a) All kinds of soil. | 1,240 | Cum | 240 ₹3.0 L | 250 ₹3.1 L |
| 2.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in?charge.
a) Ordinary rock | 62 | Cum | 550 ₹34,100 | 550 ₹34,100 |
| 3.00 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil. | 30 | Cum | 350 ₹10,500 | 350 ₹10,500 |
| 4.00 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. - Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | 20 | Cum | 650 ₹13,000 | 600 ₹12,000 |
| 5.00 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :bituminous road | 70 | Sqm | 100 ₹7,000 | 120 ₹8,400 |
| 6.00 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering for all lifts and leads | 440 | Cum | 150 ₹66,000 | 280 ₹1.2 L |
| 7.00 | Carriage of materials by mechanical transport including loading unloading and stacking - Lime, moorum, building rubbishes for a lead of 10 km. | 40 | Cum | 250 ₹10,000 | 200 ₹8,000 |
| 8.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Note: River sand and stone aggregrate from Mainland (India) to be used for this item. | 61 | Cum | 9,850 ₹6.0 L | 13,700 ₹8.4 L |
| 9.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Note: River sand and stone aggregrate from Mainland (India) to be used for this item. | 26 | Cum | 13,800 ₹3.6 L | 15,806 ₹4.1 L |
| 10.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
Note: River sand and stone aggregrate from Mainland (India) to be used for this item. | 36 | Cum | 14,100 ₹5.1 L | 16,685 ₹6.0 L |
Tender Value
₹1.8 Cr
EMD Value
₹5.5 L
Closing Date
10 Dec 2025, 6:00 pmClosed
Manager (Engg-Civil)
O/o SM (Engg-Civil), VSI Airport, Sri Vijaya Puram
Construction of Dog Kennel at VSI Airport, Sri Vijaya Puram
2025_AAI_255488_1
AAI/SVP/ENGG(C)/Dog kennel/2025-26
Open Tender
Civil Works - Buildings
180 days
VSI Airport, Sri Vijaya Puram
Please refer Tender documents.
14 documents required · 14 mandatory
₹1,180
₹5.5 L
11 Mar 2026
18 Nov 2025
12 Dec 2025
19 Nov 2025
10 Dec 2025
19 Nov 2025
19 Nov 2025 - 26 Nov 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. a) All kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in?charge. a) Ordinary rock
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. - Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :bituminous road
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering for all lifts and leads
Carriage of materials by mechanical transport including loading unloading and stacking - Lime, moorum, building rubbishes for a lead of 10 km.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : - 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu?ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable / recoverable separately). a) All works upto plinth level Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable /recoverable separately). a) All works above plinth upto floor V level Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Note: River sand and stone aggregrate from Mainland (India) to be used for this item.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level a) Thermo-Mechanically Treated bars of grade Fe-500D or more
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more
Centering and shuttering including strutting, propping etc. and removal of form for : (a)Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for : (a) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Centering and shuttering including strutting, propping etc. and removal of form for all heights : (a) Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for all heights : (a) Shelves (Cast in situ)
Centering and shuttering including strutting, propping etc. and removal of form for : (a)Lintels, beams, plinth beams, girders, bressumers and cantilever
Centering and shuttering including strutting, propping etc. and removal of form for : (a)Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form for : (a) Stairs, (excluding landings) except spiral-staircases
Centering and shuttering including strutting, propping etc. and removal of form for (a)Edges of slabs and breaks in floors and walls, wall copings under 20 cm wide
Providing and fixing 50mm dia PVC pipe weepholes in concrete in required pattern and slope complete as per the direction of EIC.
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete :- Solids blocks of required size with minimum average compressive strength of 5 N/mm2 Note: River sand from Mainland (India) to be used for this item.
Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. - Hollow blocks of required size with minimum average compressive strength of 5 N/mm2 Note: River sand from Mainland (India) to be used for this item.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings, frames, guard bar, ladder, railings, brackets, gates, sliding gates including rollers and similar works
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - Hot finished welded type tubes
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. - M.S. tube
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer?in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12 mm cement plaster : a) 1:6 (1 cement : 6 coarse sand) Note: River sand from Mainland (India) to be used for this item.
6mm cement plaster of mix on walls & ceilings - 1:3 (1 cement : fine sand) Note: Fine River sand from Mainland (India) to be used for this item.
Cement plaster (1:3) finished with a floating coat of neat cement. - 12 mm Cement Plaster Note: Fine River sand from Mainland (India) to be used for this item.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. - New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50gm/ltr
Finishing walls with Acrylic Smooth exterior paint of required shade : - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : New work (Two or more coats)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. - Size of Tile 600x600 mm Note: River sand from Mainland (India) to be used for this item.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. - Size of Tile 600x600 mm Note: River sand from Mainland (India) to be used for this item.
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed Vitrified tiles Matt/Antiskid finish of size 600x600mm Note: River sand from Mainland (India) to be used for this item.
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge - size of tile 600x600mm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Note: River sand from Mainland (India) to be used for this item.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. - Granite stone slab colour black, Cherry/Ruby red - Area of slab over 0.50 sqm Note: River sand from Mainland (India) to be used for this item.
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). - Second class teak wood
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. - 200mm
Providing and fixing stainless steel sliding door bolts with nuts and screws etc. complete :- 250x16mmm
Providing and fixing stainless steel tower bolt, (Barrel type) with necessary screws etc. complete :- 150x10mm
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.- Exposed on walls - 20mm nominal dia pipe
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.- Concealed work, including cutting chases and making good the walls etc. - 20mm nominal dia pipe
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - External work - 20mm nominal dia pipe
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.- Concealed work, including cutting chases and making good the walls etc. - 15mm nominal dia pipe
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore
Providing and fixing CPVC gate valve of approved make including joining with one step CPVC solvent cement and testing of joints complete as per the direction of Engineer In Charge - 20mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. - 15mm nominal bore
Providing and fixing CP brass health faucet of approved make including flexible hose of 1 mtr length with CP holder for handspray complete as per the direction of Engineer In Charge
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.- 15mm nominal bore
Providing and fixing C.P. brass self closing push cock (concealed) of standard design and of approved make .- 15mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: - White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm size, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board - 510x1040 mm bowl depth 250 mm
Providing and fixing P.V.C. waste pipe for sink or wash basin complete. - Flexible pipe 40mm dia
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length - 15mm nominal bore
Providing and fixing 5mm thick bevelled edged mirror using SS studs (not less than 1 mtr c/c) including the cost of mirror, SS studs of approved shape and size and cost fixing..etc as per the direction of EIC
Providing & fixing SWR floor nahani trap of size 110x75mm of approved make with SS 304 circular grating (Jali) of required size as per the direction of EIC.
Providing and fixing single socketed solvent jointed SWR pipes (Type B conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings (All type of fittings (with or without door) conforming to IS 14735) complete as per the direction of Engineer In Charge - Concealed work, including cutting chases and making good the walls etc. - 40mm nominal diameter
Providing and fixing single socketed solvent jointed SWR pipes (Type B conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings(All type of fittings (with or without door) conforming to IS 14735) complete as per the direction of Engineer In Charge - Concealed work, including cutting chases and making good the walls etc. - 75mm nominal diameter
Providing and fixing single socketed solvent jointed SWR pipes (Type B conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings (All type of fittings (with or without door) conforming to IS 14735) & fixing the pipe with clamps at 1.00 m spacing complete as per the direction of Engineer In Charge - 75mm nominal diameter
Providing and fixing single socketed solvent jointed SWR pipes (Type B conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings (All type of fittings (with or without door) conforming to IS 14735) & fixing the pipe with clamps at 1.00 m spacing complete as per the direction of Engineer In Charge - 110mm nominal diameter
Providing and fixing single socketed solvent jointed SWR pipes (Type B conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings (All type of fittings (with or without door) conforming to IS 14735), trenching & refilling complete as per the direction of Engineer In Charge - 110mm nominal diameter
Providing and fixing single socketed solvent jointed SWR pipes (Type A conforming to IS 13592) of approved make or equivalent as rain water sprouts in cement mortar 1:4 (1 cement : 4 fine sand) as per the direction of Engineer In charge - 110mm nominal diameter on masonry wall of thickness upto 230mm
Providing and fixing single socketed solvent jointed SWR pipes (Type A conforming to IS 13592) of approved make or equivalent for soil & waste and vent pipes including required fittings (All type of fittings (with or without door) conforming to IS 14735) & fixing the pipe with clamps at 1.00 m spacing complete as per the direction of Engineer In Charge - 110mm nominal diameter
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). Note: River sand from Mainland (India) to be used for this item.
Providing and fixing terminal guard as per the directions of Engineer in charge : SWR 110mm
Providing and placing aneorobic FRP bio septic tank of 1200 litres capacity including making all necessary connections. The cost includes providing the required organic microbes/ bacteria all complete as per the directions of Engineer in charge
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SWR PVC drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With CC hollow blocks of grade 'B'
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion- Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes
Felling trees of the girth (measured at a height of 1m above ground level), including cutting of trunks and branches, removing the roots and taking away and disposal of unserviceable material outside Airport premises at dumping ground all complete including incidental charges as per the Engineer-In-Charge a) Beyond 60cm girth upto including 120cm girth
THE REEF CONSTRUCTIONS (BID ID -938327)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.30 MB
Tender Documents
Tender Documents • 18.13 MB
BOQ
BOQ • 0.32 MB
Download all tender documents and submit your bid