Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹32.5 L+₹54,230.30 (1.69%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
CERTAIN COMPREHENSIVE MAINT IN VARIOUS MD ACCN AT SI LINES AREA UNDER GE BHOPAL
2023_MES_626730_1
8234/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹90,000
Yes
14 Feb 2024
3 Nov 2023
6 Dec 2023
3 Nov 2023
4 Dec 2023
17 Nov 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of white wash on walls complete all as specified and directed.
All as per item No. 1.00 here-in-before but on ceiling.
M&L for complete removal of old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over one coat of white cement based putty (where ever is required) all as specified and directed. Note:- Putty shall be measured and paid seperately.
M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper all as specified and directed.
M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item No. 5.00 here-in-before but on steel surfaces.
M&L for preparation of old plastered surface wall and applying finishing walls with acrylic smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint on wall complete all as specified and directed.
M&L for complete removal of old decorated surface of wall and applying two coats of interior plastic imulsion paint white/coloured over one coat of white cement based putty (where it is required) all as specified and directed. Note:- Putty shall be measured and paid seperately.
M&L for preparation of old decorated surface of wall including brooming down, scrapping down, smoke spot and stopping nails mark by filling with putty and applying one coat of interior plastic imulsion paint white/coloured complete all as specified and directed. Note:- Putty shall be measured and paid seperately.
All as per item No. 10.00 here-in-before but one coat of plastic emulsion paint on ceiling.
M&L for one coat of 3mm thick average wall care putty on walls/ceiling complete all as specified and directed.
M&L for complete removal of existing treatment on walls by scrapping with steel scrappers or any other means, finishing walls with textured exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm compete all as specified and directed.
Taking down chowkats or frames exc 1.50 sqm but n.exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frames n exc 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters of any descripition exc 1sqm and n.exc 2sqm each and removing to or from store complete all as specified and directed.
Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.
Taking down shutters of any description and refixing in the same opening exceeding 1.0 sqm but not exceeding 2.0 sqm each complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F of 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.
Supply and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
S&F of 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.
Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed.
M&L for brick work with fly ash, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 complete all as specified and directed.
M&L for brick work with fly ash in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed.
Demolition of concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in cills, ceismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
All as per item No. 31.00 here-in-before but for dados and similar work on skirting 20-25mm thick kota stone.
M&L for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with and including bitumen and sand 1:3 by weight complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) for flooring complete all as specified and directed.
M&L for screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:4 complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:3 complete all as specified and directed.
M&L for vitrified light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for vitrified light shade tiles 8 to 10mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
M&L for vitrified light shade tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but exc n.exc 0.42 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for vitrified light shade tiles 8 to 10 mm thick (Square/rectangular) polished, area of each tiles exc. 0.36 Sqm but n.exc 0.42 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.06 Sqm but n.exc 0.11 Sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 sqm but n.exe 0.18 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
All as per item No 43.00 here-in-before but on vertical surface
M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L for marble work 18-20 mm thick (makrana white) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.
M&L for granite work 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite complete all as specified and directed.
M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
M&L for laminated wooden flooring including polishing all as per manufacturers direction, including taking old flooring complete all as specified and directed.
S&F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.
Hacking out old broken glass (any thickness, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F of 3mm thick plain sheet glass ordinary quality nexc 0.50 sqm in each pane complete all as specified and directed.
S&F of 4.0mm thick plain sheet glass ordinary quality nexc 0.50 sqm in each pane complete all as specified and directed.
S&F of 4.0 mm thick plain sheet glass ordinary quality exc 0.50 sqm in each pane complete all as specified and directed.
S&F of solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F of 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, fixed with nails, cross sectional area exceeding 13 sqcm but not exceeding 25 sqcm, complete all as specified and directed.
S&F of 2nd class hardwood factory made 35 mm thick plain framed, panneled shutter (two panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed.
S&F of 2nd class hardwood factory made 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauges, etc ( with or without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc fixed to chowkats complete all as specified and directed.
S&F of 40 mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete and fixed to chowkats all as specified and directed.
S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified and directed.
S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube for top and bottom rails. mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame wlded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing tin the frame at site as per specified and directed. Make:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL
S&F of factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick 3D plain colour PVC sheet on the front face and 2 mm plain colour PC sheet on back face complete all as specified and directed. Make:-M/s RAJSHRI PLASTIWOOD / M/s SINTEX INDUSTRIES / M/s POLY WINDOWS / M/s DURA PLAST / / M/s ACCUCELL
S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proofand fixed in position with mild steel hold fast/ lugs/SS dash fasteners of required dia and length complete complete all as specified and directed. Note:- (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid separately.
S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
S&F of butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F of butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
All as per item No. 68.00 here-in-before but 125 mm long
S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.
S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F of 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs 25mm stainless steel curtain rod decorative type including 2Nos curtain fancy type bracket and 2 Nos of nobs complete all as specified and directed.
Dismantling of wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.
S&F of GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F of 12mm gypsum board ceiling fixed with GI angle/channel frame work including GI wire/ mesh, etc in different levels including joints filled with paster of paris, putty including POP work/cornices and applying two coat of oil bound distemper complete all as specified and directed.
S&F of galvanised cold rolled steel section framed work size 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section including expansions fasteners as in ceiling complete all as specified and directed. Make : Gabson or equivalent as approved by GE.
S&F of 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.
S&F of 40mm wide of flap continuous (piano) hinges, brass, bright finish complete all as specified and directed.
S&F in repairs prelaminated partcle board 18/19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work fixed in repairs complete all as specified and directed.
S&F of 100 mm brass handle, cast type, polished bright complete all as specified and directed.
M&L for 2nd class softwood n.exc 3 sqcm, wrought filets, but bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.
Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in two layers (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling complete all as specified and directed.
S&F in repairs vitreous china squatting pan of orissa pattern 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs of 10 Litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve all internal fittings including flush pipe and fixing to supply pipe complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed.
S&F of 400 mm x 350mm mirror with PVC cabinet of standard including all fittings as accessories complete all as specified and directed.
S&F in repairs stainless steel sink, 1mm thick for kitchen or laboratory with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.
S&F in repairs 15 mm stop cock, cast copper alloy, screwed down high pressure, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15 mm bib taps, cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm, pillar taps, cast copper alloy, with capstain head chromium plated screw down high pressure, with or without lettered hot or cold with long shanks and fly-nuts screwed for iron pipes and fixed as in repair including necessary small GI fittings complete all as specified and directed.
S&F in repairs 15 mm, chrominium plated, sink cock with raised "J" shapped swinging spout (wall mounted model) with connectng legs and wall flanges complete all as specified and directed.
S&F in repairs 15 mm, chrominium plated, single lever sink mixer with swingng spout on upper side (wall mounted model) with connectng legs and wall flanges complete all as specified and directed.
Fixing only in repairs mixing valve including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.
S&F in repairs 15 mm wash basin mixer, single lever, extended basin mixer (height 95mm ) with popup base system with 450mm long braided hoses, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specfied and directed.
S&F in repairs chrominium plated, health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and directed.
S&F in repairs to stainless steel connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repairs to stainless steel connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.
S&F in repairs stainless steel single towel rail 600 mm long and 20mm dia complete all as specified and directed.
S&F in repairs chrominium plated towel, ring round with round flanged complete all as specified and directed.
S&F in repairs chrominium plated towel, rack, 600mm long with lower hangers complete all as specifed and directed.
S&F in repairs chrominium plated, toilet paper holder with stainless steel flap complete all as specified and directed.
S&F in repairs overhead square shower with rubit cleaning system 150mmx150mm complete all as specified and directed. Make :- JAQUAR( Cat No OHS -354495) or Equivalent
S&F in repairs 15mm single lever, wall mixer, exposed shower with provision for connection to exposed shower pipe and hand shower with connecting legs and wall flanges complete all as specified and directed. Make:- Prayag or Jaquar or equivalent.
S&F in repairs 15mm single lever, wall mixer exposed shower with provision for connection to exposed shower pipe with connecting legs and wall flanges complete all as specified and directed. Make:- Prayag or Jaquar or equivalent.
S&F of 15 mm bib cock, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.
S&F of 15 mm angle valve, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.
S&F in repairs soap dish holder, chrominium plated and glass holder for soap complete all as specified and directed.
S&F in repairs soap dispender with glass bottle complete all as specified and directed.
S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated fixing complete all as specified and directed.
S&F in repairs corner glass shelf 250mm long (with bracket) complete all as specified and directed.
S&F of wash down water closet with seat cover, waste pipe, cistern with lid and fittings (complete set) and fixing complete all as per manufacturere instructions specified and directed.
M&L for applying distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.
M&L for preparation of new plastered surface wall and applying finishing walls with acrylic smooth exterior paint of required shade, New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.
Dismantling of timber santiling in fillets rails, posts, rafters, purlins, etc under 40 sqcm in section unframed work complete all as specified and directed.
M&L for preparation of newly or previouly untreated surface of steel and iron surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F of pre-painted galvatume aluminiu zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
All as per item No 126.00 here-in-before but 0.50mm thick plain sheeting, in ridges
M&L for 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.
M&L for 2 mm thick fibre glass reinforced translucent plain sheeting with sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings (including of steel sheeting or other covering (Fe-410-W, Gde-E250) complete all as specified and directed.
M&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240 complete all as specified and directed.
S&F of mild steel work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and smilar articles complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F of 75 mm PVC(SWR) pipes, single socketed, in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
S&F of PVC(SWR) 110mm pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
S&F of 75mm PVC(SWR) bend complete all as specified and directed.
S&F of 75mm PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed.
S&F of 75mm PVC(SWR) vent cowl complete all as specified and directed.
S&F of 110mm PVC(SWR) vent cowl complete all as specified and directed.
M&L for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd.
S&F of PVC(SWR) 110 mm, bend complete all as specified and directed.
S&F in repairs 600mmx450mm, looking mirror approved quality with wooden back and edge, complete polishing, fixing in repairs complete all as specified and directed.
M&L for grinding and polishing kota/marble/terazoo/mosaic flooring complete all as specified and directed.
Dismantling of water tanks of exc 500 litres but n.exc 1000 litre capacity and removing to store complete all as specified and directed.
S&F of 500 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I complete all as specified and directed.
S&F of 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I complete all as specified and directed.
S&F of 20 mm dia, ball valve PTMT, high pressure with polythene float and fly nut, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed.
S&F in repairs, gun mental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs 12mm thick toughened glass in door, partitions etc similar work etc in approved shape and design complete all as specified and directed.
S&F in repairs stainless steel plate rack complete assembeled set of size 31 x 36 x 10 inch fixed with screws all as specified and directed.
S&F in repairs stainless steel plate rack complete assembeled set of size 24 x 30 x 10 inch fixed with screws all as specified and directed.
M&L for stainless steel, hand rails, grade 304 confirming to IS, approved design including ornamental fittings, globes and all necessary drilling, bolting, riveting, welding etc and fixed complete in floor, steps etc as in similar work all as specified and directed.
S&F of kitchen baskets with 100% stainless steel, non - magnatic, multilayer chromium plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 100mm including telescopic channel of 20 inch length complete all as specified and directed. Make Life time -code : DSN 21 or equivalant
S&F of kitchen baskets with 100 % stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 150mm including telescopic channel of 20 inch length complete all as specified and directed. Make Life time -code : DSN 21 or equivalant
S&F of kitchen baskets with 100 % stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 200mm including telescopic channel of 20 inch length complete all as specified and directed. Make Life time -code : DSN 21 or equivalant
S&F in repairs 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.
S&F in repairs 0.9mm thick decorative laminated type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.
S&F of 105x60mm pressed steel frames for doors with one or more rebates including necessary supply and fixing of lugs, hinges, lock strike plate, etc. made out of 1.25mm thick mild steel sheet complete all as specified and directed.
S&F 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing of lugs, hinges, lock strike plate, etc. made out of 1.25mm thick mild steel sheet complete all as specified and directed.
S&F in repairs double action,floor spring, hydraulically regulated made up of minimum 1.25 mm thick, aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs to aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
M&L for cabinet hinges, soft close SS 8 crank complete all as specified and directed.
Taking down existing old roof treatment of any description, any type including removal of old Tar felt, screed bed and plastering etc complete all as specified and directed.
M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532-2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using butane torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and directed.
M&L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the roof slab at least for 72 hrs complete all as specified and directed.
M&L for cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and directed.
M&L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:3 mixed complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
M&L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately.
M&L for grout of permanent bonding of structural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI pipe nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified and directed.
M&L for petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed.
M&L for petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend including replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed.
M&L for tiles cleaning by using appropriate chemical of approved make with using prescribed machine also as necessary to remove stain/ dust etc and maintain beauty of tiles in MD Accn complete all as specified and directed.
Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace complete all as specified and directed. Note :- The defective parts (any type of aluminium section) complete. Aluminium parts will be measured and paid separately.
S&F in repairs pulley operated clothes drying system consisting of anodized aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of delrin with rope guide mounted on channel pair of length 24” (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self-tapping screws provided in kit. Rope will be polyester braided undyed of 4mm dia complete all as specified and directed. Make:-Easy Dry or equivalent
S&F in repairs wall mounted stand consisting of 16 mm dia powder coated mild steel rods of CR steel mounted on powder coated mild steel square pipe for drying clothes complete all as specified and directed. Make:-Easy Dry or equivalent
M&L for removal of existing affected damaged concrete-surface, preparation, distressed, loose cover concrete including loose damaged concrete from all structural members up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement only at affected concrete (good & sound concrete should not be chipped / damaged) by chipping / hacking with chisel and hammer or by mechanical means like light weight chisel hammer, chippers, making saw cut at periphery to avoid feather edge and removal and disposal of debris at plant area including labour, tools, electricity, plant and machineries etc. complete all as specified and directed. Note:- Depth of chipping may vary from 20 to 100 mm.
M&L for cleaning of rust from rebar, providing and applying apcorep rustrem by brush before that, cleaning the re-bar by tar brush, sand paper then using air blower to remove the excess rust from concrete surface including labour, tools, electricity, plant and machineries complete as per detail specification and as directed.
M&L for providing and applying SBR based binder as bonding agent between old concrete surface and repair treatment i.e. Asian Paints Apcorep Repair Polymer complete all as specified and directed.
M&L for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) up to 15mm in a single coat @ 34 kg per sqm for 15mm thickness as per manufacturer instructions complete all as specified and directed.
M&L for 5 mm ACP sheet, both side colour coating complete all as specified and directed.
S&F of 18 mm thick high density WPC board (Black Cobra make or equivalent as approved by GE) as in kitchen cabinet (with shelves and partitions) including necessary fittings and fixtures as manufacture's instruction complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Dismantling/taking down of unserviceable old existing unserviceable submain wiring of any size complete all as specified and directed.
Dismantling/taking down of unserviceable distribution boards with MCBs/metal sheet enclouser complete all as specified and directed.
M&L for concealed point wiring for one light/fan/exhaust fan controlled by one switch with and includidng single core PVC insulated unsheathed flexible conductor FRLSH cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III) 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and directed.
All as per Srl item No -187.00 here-in-before but for one switch socket combination 5/6 Amp on independent board.
All as per Srl item No -187.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches.
All as per Srl item No. 187.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm complete.
All as per Srl item No. 187.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm complete.
M&L for point wiring for one light /fan/ exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLSH cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and directed.
All as per Srl item No -192.00 here-in-before but for one switch socket combination 5/6 Amp on independent board.
All as per Srl item No -192.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches.
All as per Srl item No. 192.00 here-in-before but for one switch socket combination 6 pin 5/15 Amps on independent board with wire of size 2.5 Sqmm.
All as per Srl item No. 192.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm.
S&F of switch piano flush type 5/6 Amps, single pole. one way complete all as specified and directed.
S&F in repairs switch piano, flush type, 15/16 Amps, single pole one way complete all as specified and directed.
S&F in repairs socket out let 5 pin 5/6 Amps complete all as specified and directed.
S&F of socket out let 2-in-1, 6 pin 5/6 & 15/16 Amps complete all as specified and directed.
S&F in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal complete all as specified and directed.
S&F in repairs ceiling rose 2 or 3 terminals, 65x25 mm dia poly carbonate isolated complete all as specified and directed.
S&F in repairs lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed.
S&F in repairs stepped type electronic fan regulator single / double module flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.
S&F in repairs modular switch one way 6 Amp one module, 240 volts complete all as specified and directed.
S&F in repairs modular bell push 6 Amp one module, 240 volts complete all as specified and directed.
S&F in repairs modular switch one way 16 Amp one module, 240 volts complete all as specified and directed.
S&F in repairs modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.
S&F in repairs modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed.
S&F of modular fan regulator complete all as specified and directed.
S&F in repairs modular white cover plate with frame 2 module complete all as specified and directed.
S&F in repairs modular white cover plate with frame 3 module complete all as specified and directed.
S&F in repairs modular white cover plate with frame 6 module complete all as specified and directed.
S&F in repairs modular white cover plate with frame 8 module complete all as specified and directed.
S&F in repairs electric bell, single phase suitable for 240 V complete all as specified and directed.
S&F in repairs LED tube light complete fitting 1x18 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in repairs LED warm white light fitting mirror type with high out put 2 feet, 10 watt 220 V AC connecting up with three core flexible copper conductor cable of suitable sixe complete all as specified and directed.
S&F in repairs LED lamp 10 Watt, B22 CDL complete all as specified and directed.
S&F in repairs LED light luminaire 600mmx600mm, 35/36 watt, 220V AC recessed type with high efficiency, PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in repairs sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 25/20/10 Amp complete all as specified and directed.
S&F in repairs sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed.
S&F in repairs DB, SPN 12 way double door for MCB, 240 volt with 200 amps rated bus bar with encosure blank plates for unused complete all as specified and directed.
S&F in repairs DB, TPN , 4 way double door for MCB, 415 volt with 200 amps rated bus bar with encosure blank plates for unused complete all as specified and directed.
S&F in repairs MCB, SP suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SP complete all as specified and directed.
S&F in repairs MCB, SPN suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, including taking down old unsv MCB SPN complete all as specified and directed.
S&F in repairs MCB, SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SPN complete all as specified and directed.
S&F in repairs MCB, TPN suitable for 415 volts, AC supply, 40 to100 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB TPN complete all as specified and directed.
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Note:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice and making good the disturbed surfaces as per existing complete all as specified and directed. Note:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.
S&F in replacement building security light fitting complete with 25 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and mild steel clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 54856.00
Jyoti enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .