Providing LED Street/Security lights in campus of BOP Doradabri of 169 BN BSF and BOP Sangerbari of 157 BN BSF under SHQ BSF Gopalpur

Amount

Supplying and erection of 7 Mtrs long continously tapered octagonal pole (bolt fixing type) in single section with single longitudinal weld & galvanized with 1 Mtr long single arm standard bracket made 48.3 OD GI Pipe suitable to mount on pole and following specification:- Make CG/Bajaj/philips/Utkarsh or equivalent make) Top dia - 70mm b) Bottom dia - 130 mm c) Thickness of sheet - 3 mm d) Base plate size - 200mm X 200 mm X 12 mm e) The pole shall be complete with following :- Set of fountain bolts - M20, 700 mm in length, 4 Nos J Type complete with anchor plate. The foundation bolt shall be hot dipped galvanised. f) The pole should be suitable for fixing of bracket for installation of 02 nos Security light fittings, g) Approx Foundation Size- Upto ground level- Depth 1 mtr, Above ground level- Height- 0.30 m, Length-0.4m, Width- 0.4 m)

Supplying and erection of 9 Mtrs long continously tapered octagonal pole (bolt fixing type) in single section with single longitudinal weld & galvanized with Channel type bracket suitable for 4 Nos street light mount on pole and following specification:- Make CG/Bajaj/philips/Utkarsh or equivalent make) Top dia - 70mm b) Bottom dia - 155 mm c) Thickness of sheet - 3 mm d) Base plate size - 260mm X 260 mm X 16 mm e) The pole shall be complete with following :- Set of fountain bolts - M24, 750 mm in length, 4 Nos J Type complete with anchor plate. The foundation bolt shall be hot dipped galvanised. f) The pole should be suitable for fixing of bracket for installation of 04 Nos Security light fittings, g) Approx Foundation Size- Upto ground level- Depth 1 mtr, Above ground level- Height- 0.30 m, Length-0.4m, Width- 0.4 m)

S.I.T.C of feeder pillar outdoor type double door, dust and vermin proof made out of 2 mm thick CRCA sheet of nominal size 0.9 mtr. x 0.75 mtr x 0.3 mtr, front and back openable- hinged type door, duly eposy based pwder coated (from inside and outside), 4 strip 100 Amp capacity PVC Insulated Aluminium Bus bar, provision of 4 pole terminal block for incoming and outgoing cables and fixed on MS angle iron frame work of size 40 mmx 40 mmx 6 mm length with 2 nos. 1200 mm long legs duly welded to the frame structure and out of which 600 mm will be grouted in existing foundation i/c supply and fixing of following accessores, connection and interconnection, inter locking wiring, thimbling, numbering-ferrules up & lowering system, earthing stud etc. complete as reqd. a) Main incomer - 415 V, 100 Amp 4 Pole, 25 KA MCCB : 1 Nos. (Make- Siemens/L&T/ABB) b) Outgoing 415 V, 63 Amp 4 Pole, 25 KA MCCB : 3 Nos. (Make- Siemens/L&T/ABB) c) 100 Amp TP & N , MCB C-Series : 01 Nos (Make- Siemens/L&T/ABB) d) Digital Timer : 01 Nos (Make- Siemens/L&T/ABB) e) Digital LED Ammeter with CT Coil : 01 Set (Make- Siemens/L&T/ABB) f) Digital LED Voltmeter : 01 Nos (Make- Siemens/L&T/ABB) g) Contractor 100 Amp 4 Pole : 01 Nos (Make- Siemens/L&T/ABB)

S.I.T.C of feeder pillar outdoor type double door, dust and vermin proof made out of 2 mm thick CRCA sheet of nominal size 1.25 mtr. x 0.80 mtr x 0.4 mtr, front and back openable- hinged type door, duly eposy based pwder coated (from inside and outside), 4 strip 200 Amp capacity PVC Insulated Aluminium Bus bar, provision of 4 pole terminal block for incoming and outgoing cables and fixed on MS angle iron frame work of size 40 mmx 40 mmx 6 mm length with 2 nos. 1200 mm long legs duly welded to the frame structure and out of which 600 mm will be grouted in existing foundation i/c supply and fixing of following accessores, connection and interconnection, inter locking wiring, thimbling, numbering-ferrules up & lowering system, earthing stud etc. complete as reqd. a) Main incomer - 415 V, 100 Amp 4 Pole, 25 KA MCCB : 1 Nos. (Make- Siemens/L&T/ABB) b) Outgoing 415 V, 63 Amp 4 Pole, 25 KA MCCB : 3 Nos. (Make- Siemens/L&T/ABB) c) 100 Amp TP & N , MCB C-Series : 01 Nos (Make- Siemens/L&T/ABB) d) 40 Amp DP MCB : 06 Nos (Make- Siemens/L&T/ABB) e) Digital LED Ammeter with CT Coil : 01 Set (Make- Siemens/L&T/ABB) f) Digital LED Voltmeter : 01 Nos (Make- Siemens/L&T/ABB)

Supplying, Installation, testing & Commissioning of Nos 45 Watt rating LED street light luminaire, out door type with pressure die cast aluminium housing & heat resistant glass, IP65 protection, suitable for single phase, 50 Hz AC (Make Crompton model- LSTS-45-CDL-M or Make Surya/Havells/Orient/ Bajaj of same specification), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, mounting of LED street light fitting directly on existing bracket of pole etc. as required.

Supplying, Installation, testing & Commissioning of 150 Watt rating LED Flood light luminaire, out door type with pressure die cast aluminium housing & heat resistant glass, IP65 protection, suitable for single phase, 50 Hz AC (Make Crompton model- LFLN-150-CDL/60M or Make Surya/Havells/Orient/ Bajaj of same specification), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, mounting of LED street light fitting directly on existing bracket of pole etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing & fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I nut, bolt, spring, washer excavation and refilling etc. as required.

Providing & fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as reqd

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. (A) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sq. mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32 mm)

Providing and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. 3½ X 35 sq. mm (Make Havells /Polycab/ Finolex)

Providing and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 3½ X 25 sq. mm (Make Havells /Polycab/ Finolex/KEI)

Providing and fixing following dia G.I. pipe (medium class) ISI approved complete with G.I. fittings etc as required. (A) 50 mm dia

Supplying, Installation, testing & Commissioning of Nos 40 Watt rating LED Post Top Light, out door type , IP65 protection, suitable for single phase, 50 Hz AC (Make Crompton model- LPTO-40-WW-M or Make Surya/Havells/Orient/ Bajaj of same specification), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, mounting directly on existing G.I pole etc. as required.

Providing and fixing of Post Top Light Pole of 80 mm dia & 3 m length G.I. pipe (medium class) ISI approved complete with G.I. fittings and suitable foundation etc as required.

Supplying and erection of 6 Mtrs long continously tapered octagonal pole (bolt fixing type) of dimensions, Top dia - 70mm b) Bottom dia - 130 mm c) Thickness of sheet - 3 mm d) Base plate size - 200mm X 200 mm X 12 mm e) The pole shall be complete with following :- Set of fountain bolts - M20, 700 mm in length, 4 Nos J Type complete with anchor plate. The foundation bolt shall be hot dipped galvanised. f) The pole should be suitable for fixing of bracket for installation of 02 nos Security light fittings, g) Approx Foundation Size- Upto ground level- Depth 1 mtr, Above ground level- Height- 0.30 m, Length-0.4m, Width- 0.4 m)

Supplying, Installation, testing & Commissioning of 30 Watt LED Solar street light inbuilt 12.8 V/24 Ah Life Po4 battery with minimum warranty 3 years and 75 wp SPV module solar panel out door type with pressure die cast aluminium housing & heat resistant glass, IP65 protection including mounting bracket suitable for solar street light etc. as required. (Make UK Solar/USHA/SRIRAM/INA or equivalent)

Painting of GI pole of height upto 7 Mtr with One coat of primer and two or more coat of Synthetic enamelled Aluminium paint of approved brand & Color (asian/Nerolac/Berger/Dulux) to give an even shade including painting of light bracket with two or more coat of synthetic emamelled aluminium paint of approved brand & color complete as required.

M/S Vimal Pasari (BID ID -3120299)

M/s Maa Electric Works (BID ID -3127872)

D.D. Metal Corporation (BID ID -3127353)