PROVN OF CERTAIN STORE ROOMS AT LGJ MIL STN

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, laying pipe line, laying of cables or fixing poles and stays and struts etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with Fly Ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Surface excavation N.exc. (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge..

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge

M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.

M & L 75 mm thick cement concrete 1:2:4 type B2, using (40mm graded stone aggregate) as in hard standing finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F for mild steel work for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc similar work conforming to Fe 410-W (Gde E-250) quality A complete all as specified and as directed by Engineer-in-charge.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engineer-in-charge.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall, finished fair even and smooth including mixing of WPC in mortar all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.

M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in foundation, including rafts, footing, foundation beams ; plinth beams; bases for columns, pillars etc complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid seperately

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat complete all as specified and directed by Engr-in-charge.

S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F for TMT bars (Fe-500D) 5 mm dia over upto including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified & directed

S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors all as directed.

Returning filling in incl spreading, levelling watering and well ramming in layer n.exc 25cm thick complete all as specified and directed.

S & F for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt n. exc 4 Kg/Sqm complete all as specified and as directed by Engineer-in-charge.

M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of new or previously untreated surfaces priming with one coat of read oxide & finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge.

M&L for sand filling in floors or in foundations including watering and consolidation all specified and directed

Labour only except sand filling in floors or in foundations including watering and consolidation all specified and directed

E/M Portion M&L for concealed Point wiring for One light, one way switch controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

,---ditto--- all as per srl item No 25 above, but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets complete all as specified and as directed.

,---ditto--- all as per srl item No 25 above, but for one 3 pin 5 Amp socket outlet on independent board complete all as specified & directed

Supply & fixing switch piano type flush button single pole one way 5/6 Amps, 230 volts all as specified & directed.

Supply & fixing socket 2 in 1, 6/5 pin 5 Amp, 230 volt AC supply all as specified & directed.

S & F LED light fitting 1 x 20 W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge

Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.

Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed

Supply and fixing MCB SP 6-32amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing MCB SPN 40 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing PVC Blanking Plates with internal lock complete all as specified and as directed.

Material & Labour for Sub Main Wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 10 sq.mm & One run of 10 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Supply and laying and testing cable XLPE insulated, screened, PVC bedded, glavanized stell strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium condutor size 70 sqmm x 3.5 core complete all as specified and directed

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge

M & L for brick protection with sub class 'B' brick laid across the cable complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

PAREEK AND COMPANY

ram rattan dass aggarwal

Dashmesh Construction Company

Aggarwal brothers and company

SHIVA CONSTRUCTION COMPANY

AJAY CONSTRUCTION COMPANY

m/s G.S. Enterprises