SPL REPAIR TO BLDG NO P-206 (OFFR MD ACCN QTRS), BRICHGUNJ MIL STN, SRI VIJAYA PURAM

Demolition of brick work built in cement mortar or lime mortar complete of any description compete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) compete all as specified and directed.

Dismantling boarding of any description, fixed in any position with nails/screws compete all as specified and directed

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre compete all as specified and directed .

Material and labour Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and directed .

S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. As per specification and drawing complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises compete all as specified and directed .

M/L 40mm thk PCC 1:2:4 type B-1 using 20 mm graded agg as in flooring finished fair and even without using extra cement compete all as specified and directed.

M&L Vitrified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes compete all as specified and directed.

All as item no 10 above but as in skirtings/Dado in CM 1.4 all as specified and directed compete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

M&L Glazed ceramic coloured / printed tiles (450X300mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3 all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land compete all as specified and directed .

M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified and directed..

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using 3% of WPC compete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 on for ceiling surfaces, finished even and smooth without using extra cement etc compete all as specified and directed .

M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty as specified and directed.

All as item no 17 above but on Ceiling surfaces compete all as specified and directed

M&L preparation of old plastered surfaces of wall and applying one coat of Oil Bound distemper complete all as specified and directed compete all as specified and directed .

All as item no 19 above but on Ceiling surfaces

M& L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on walls all as per manufacturer instruction and as directed .

Taking down chowkats or frames exceeding n exc 1.5 sq. m each (Without taking off shutters & Grill from the frame) compete all as specified and directed.

Taking down chowkats or frames exceeding exc 1.5 sq. m but n exc 4 sq. m each (Without taking off shutters & Grill from the frame) compete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directions of Engineer-in-charge.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Supply only 5.5mm thick sheet glass, ordinary quality in squares exc 0.50 sq.m in each pane.

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each pane

Supply and fix aluminium composite panel sheet of 3 to 4 mm thick with 0.5 mm thick aluminium sheet both sides as in wall cladding & false ceiling, fixed on aluminium frame work with plastic strips ( double sided sticker) of suitable size of varying thickness of 10mm to 30 mm , applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. (Note : Necessary frame work if any will be measured and paid separately)

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 compete all as specified and directed

S&F 200mm Aluminium anodised barrel tower bolts of extruded sections compete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised compete all as specified and directed.

S&F 25mm dia aluminum powder coated best quality curtain rails including decorative globes at both ends complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia compete all as specified and directed .

All as per item No. 76 above but 25 mm dia compete all as specified and directed .

All as per item No. 17 above but 40 mm dia compete all as specified and directed .

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm compete all as specified and directed.

All as per item No. 39 above but 25 mm dia compete all as specified and directed

All as per item No. 39 above but 40 mm dia compete all as specified and directed

Supply and fix in repairs vitreous china CASCADE type WC single piece-WC with UF Soft close slim seat Cover, hinges, fixing accessories set, dual flush cistern fittings complete of size 655 x 360 x 765 mm , P trap-180mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. LYS-WHT-38851P180UFSM or equivalent in parryware/hindware/kohler .

S&F in repairs wash hand Basin of size 500x415x200 mm including all connecting fittings and brackets etc of Jaquar Cat Part No FNS WHT-40931 or equivalent in parryware/hindware/kohler, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs bathroom swivel mirror 630x445mm rectangular shape of Kubix prime range Jaquar Cat Part No AKP-CHR-35795 or equivalent in parryware/hindware/kohler complete all as specified and directed.

S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ALD-CHR-573 or equivalent in parryware/hindware/kohler)

S&F in repairsToilet paper holder,with flap type fixed to wall with chromium plated brass screws. (Make : Jaquar cat No ACN-CHR-1153S or equivalent in parryware/hindware/kohler )

S&F in repairs two way bib cock, brass CP mixture 20 mm dia complete of Make Jaquar Cat Part No ARI 39041 or equivalent in parryware/hindware/kohler all as specified and as directed by Engineer-in-Charge

S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent in parryware/hindware/kohler, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Aluminium anodised chromium plated tubular towel rack, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.(Make : Jaquar cat No AHS-CHR-1581H or equivalent in Plumber/hindware/parryware/parko/kohler etc)

S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. OPP-CHR-15053PM or equivalent in Plumber/hindware/parryware/parko/kohler etc complete all as specified.

S&F repairs connection pipe 15mm size with CP brass Nuts of length 600mm complete all as specified and as directed by Engineer-in-Charge (Make : Jaquar cat No ALD-CHR-801B or equivalent in plumber/hindware/parryware /parko/kohler etc )

S&F in repair 32mm bore brass CP bottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed (Make : Jaquar cat No ALD-CHR-769L300x190 or equivalent in Plumber/hindware/parryware/parko/kohler etc )

S & F in repairs 15 mm dia bore single lever basin mixer without popup waste and 450mm long braided hoses complete all as specified and as directed. (Make : Jaquar cat No ARI-CHR-39001B or equivalent in Plumber/hindware/parryware /parko/kohler etc)

Supply and fix in repairs brass CP 15mm dia bore wall mixer 3-in-1 system with provision for both hand shower and over head complete with 115mm long bend pipe, connecting legs & wall flange (without) hand & overhead shower) complete all as specified and as directed . Make: Jaquar cat Part No.FLR-CHN-5281N or equivalent in Plumber/hindware/ parryware /parko/kohler etc as approved by GE

S&F 15mm in repairs Bib taps chromium, plated cast copper alloy, fancy type with cruttch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and complete all as specified and as directed (Make : Jaquar cat No OPP-CHR-15037PM or equivalent in Plumber/hindware/parryware/parko/kohler etc )

S&F in repairswaste coupling 32mm size full thread with 80mm height of Jaquar Cat part No ALD-CHR-705 or equivalent in Plumber/hindware/parryware/parko/kohler etc complete all as specified and directed.

S&F in repairs Chromium Plated shower Steel Grating of Jaquar Square Shape Body Shower, For Bathroom, Model Name/Number: Make: Jaquar Cat code no BSH-CHR-1751 or equivalent in Hindware/parryware/kohler

S & F in Repair Towel Ring Round Complte all as specified and directed.Make: Jaquar Cat AQN 7721 or equivalent in Hindware/ parryware/kohler

S&F Chromium Plated Steel Grating of 100mm size.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor.

S&F 75mm dia outlet PVC (SWR) PVC (SWR)floor trap with grating including jointing with solvent cement

S&F PVC (SWR) Gully trap 125/110 mm,seting and incl joining with solvent cement

S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors.

S&F 75mm dia PVC (SWR) bend with oval access door

S&F 110mm dia PVC (SWR) bend with oval access door

S&F PVC (SWR) cowls 100mm dia.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite

S & F in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug, waste pipe, washer, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size915mm x 460mm bowl size 410mm x 330mm x160mm etc, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed.

S &F MS work in wind ties for roof including securing bolts all as specified

Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and directed.

M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of old steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and directed.

Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.

Taking down carefully copper point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

M & L for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including concealed pvc conduit, fixed on wall / ceiling with all accessories, fittings, PVC junction boxes, modular plate etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified.

One light/ bell point controlled by one switch

One exhaust fan point controlled by one switch

One fan point controlled by one switch and one regulator

One 3 pin switch socket outlet point 5 amps on independent board

All as per item No 84 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fixing Modular switch 1 way 5 A, 1 module all as specified and directed.

Supply and fixing Modular switch 1 way 15 A, 1 module all as specified and directed.

Supply and fixing Modular Bell push 5A, 1 module all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, 2 module, 230 volts all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, 2 module, 230 volts all as specified and directed.

Supply and fixing modular fan step regulator, 230 V, AC, 120W - 2 module complete all as specified.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.

Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed.

Taking down serviceable exhaust 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as directed.

S & F in repair complete all as specified and directedSingle pole and neutral metal enclosure with 2 pin and earth plug and socket and top plug complete with 20 Amps MCB SP , 240 Volt all as specified and as directed

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix in repair sheet metal enclosure Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar double door suitable for mounting MCCB 100 A TPN as incomer and MCBs as outgoing, Triple pole as incoming complete all as specified and directed including taking down old MCB DBs complete.The Rate shall be included the incomer MCCB TPN of 100 Amps complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair aluminium housing LED batten 20 Watt mounted batten fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S & F in repair LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

S & F in repair LED Wall light 20 Watt, white colour provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable wall light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair surface mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair LED lamp of 9/10 watt all as speciifed and dircted

Supply and fix in repair lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 36 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

M & L in repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including concealed PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

All as per item no 107.00 above but wiring of size 4 sqmm complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I complete all as specified and directed.

supply & Lay in repair XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers complete with aluminium lugs as required at site and as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

S&F 50 mm GI tubing with all fittings laid in trenches complete all as specified and directed.

Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed .

Supply, lay/fix, connect and testing steel water tubing of 80 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures,Clamps and fixed to wall/ceiling or laid on floors including taking down of old unserviceable pipe complete all as specified and directed.

All as per item No 117 above but of size 40mm dia.

All as per item No 117 above but of size 25mm dia.

S&F in repairs gunmetal gate or globe valve for 40mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete all as specified and as directed.

All as per item No 120 above but of size 25mm dia .

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed

Supplying, hoisting and fixing in repairs rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre capacity etc complete all as specified and directed.

Please Enable Macros to View BoQ information