REPAIR/ REPLACEMENT OF ELECTRIC WIRING, DISTRIBUTION BOARD AND SUB MAIN WIRING AND ALLIED CONNECTED WORKS IN MD AND OTM ACCN AT MIL STN KALKA UNDER GE (I) JUTOGH.

Taking down carefully point wiring from existing place (light/ fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose, pendant holder, fitting and fixtures, MCB, Main switches, call bell etc and making good to disturbed surface to wall, floor etc to match with existing surface either by using same colour distemper or white colour wash, complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs and making good disturbed surfaces and matching with existing colour wash, complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing colour wash complete all as specified and directed.

M&L for point wiring complete with 1100 volts grade PVC FRLS-H insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including new PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly for One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch, complete all as specified and directed.

All as per Srl item No. 04.00 above but for one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board, complete all as specified and directed.

All as per Srl item No. 04.00 above but for one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per Srl item No. 04.00 above but for wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per Srl item No 04.00 above but in existing conduit pipe for One light point/ fan/ bell point controlled by one single pole one way switch, complete all as specified and directed.

All as per Srl item No 05.00 above but in existing conduit pipe complete all as specified and directed.

All as per Srl item No 06.00 above but in existing conduit pipe complete all as specified and directed.