SPECIAL REPAIR OF SEWAGE LINE AND DRAINAGE SYSTEM AT JCOS OR LIVING ACCN OF HQ 138 WE SPL REPAIR TO BLDG NO T 58 OR LINE OF FMSD AND REPAIR TO FLOORING PLASTERING JOINERY WALL PANELING AND MISC WORKS OF 7 VIKAS UNDER GE 865 EWS

Amount

M&L soakage well of 3.0 mtr internal dia at top and min 1.80 mtr dia at bottom having min 2.45 mtr height of 380mm thick random rubble uncoaoursed stone masonry wall in CM 1:6 with 150mm thick PCC 1:4:8 type D2(using 40mm graded crushed stone aggregate ) below stone masonry at bottom and RCC slab using Design Mix M-25 with reinforcement 10mm dia bars @ 150mm C/C bothways cranked at 1/4 th of span including arrangement for manhole opening and manhole cover, inlet for 100/150mm dia pipe and rest all as specified as per Drg No CESZ/TD-1078/2011 sheet 1/1. Note : The rate includes excavation in hard/dense soil and construction of soakage well as per drawing , connection of inlet pipe , 100mm dia PVC vent pipe with cowl, returning , filling and removing of surplus soil to a distance exc 50 mtr but n.exc 100 mtr from site. For any disputed issue regarding drawing decision, of Engr-in-Charge shall be final and binding for execution.

Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, including removing all debris out side the MoD land complete all as specified and as directed by Engineer-in-Charge.

M&L for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork all as specified and directed. Note : S&F reinforcement shall be measured and paid separately.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engineer-in-Charge.

TMT mild steel bars, 06 to 08mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engineer-in-Charge.

Demolition of precast concrete block/Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:4 complete all as spd and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement mixed with integral water proofing admixture as per manufacturer's instrucitons complete all as specified and as directed. Note : Water proofing admixture shall be measured and paid separtely as "Supply only" under relevant item of this BOQ.

Supply only liquid Integral waterproofing admixture complete all as specified and directed. Make : Pidilite/Dr Fixit

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-1 (using 20 mm graded crushed stone aggregate) 75 mm thick sub base, sub floor and pavings complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in floor finishes and the like including finishing the surface even and smooth complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MoD land.

Demolition and breaking up 200 mm dia drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MoD land.

Material and labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregarte) for 150 mm bore pipes complete all as specified and directed.

Material and labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregarte) for 200 mm bore pipes complete all as specified and directed.

Supply and fixing Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown on drgs (concrete bed shall be measured and paid for separately).

150 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

Supply and fixing Salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown on drgs (concrete bed shall be measured and paid for separately).

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore pipes, complete all as specified and as directed by Engr-in-Charge.

M&L for cleaning of septic tanks (any capacity) by dewatering septic water etc. removing waste material / sludge etc to a distance exc 100m outside the MoD land and burrying the same in pits in hygenic manners and covering the pits with excavated earth complete all as specified and directed by Engr-in-Charge. NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate.

M&L for cleaning of septic tanks (any capacity) of any depth incl let and outlet chamber and removing sludge (in solid and semi solid), silt, both organic and in-organic nature including any type of waste matterial after plugging of incomimg sewage line and removing waste material / sludge etc to a distance exc 100m outside the MoD area and burrying the same in pits in hygenic manners and covering the pits with excavated earth complete all as specified and directed by Engr-In-Charge. NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate.

M&L for cleaning of man holes n.exc 1.5m deep and removing sludge/waste material to distance exc 100m outside MoD land and burying in pits in hygenic manner and covering the pits with excavated earth complete all as specified and directed by Engr-in-Charge. NOTE: The cost for excavation and earth work for pits is deemed to be included in the unit rate

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in any type of soil and getting out soil, complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sqm on plan in any type of soil and getting out soil, complete all as specified and as directed by Engineer-in-Charge.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.

Viterous china wash basin, white flat back size 600x 480mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge. MAKE: CERA/HINDWARE/PARRYWARE

10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, fixed in repairs all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE

Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware

PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme

15mm bore bib tap, (minmum weight 350 gms), chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA

Chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, fixed in repairs, complete all as specified. MAKE: PARKO/MARC/ESS ESS/CERA

S&F grating doom 125 mm with waste hole of PTMT. Make: Prayag/Polytuf/Supreme

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia

Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL

S&F 75mm bore PVC (SWR) pipe bends any radius complete all as specified and directed.

S&F PVC (SWR) T (Single T) of 75 mm to dia complete all as specified and directed.

M&L 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 'P' trap 110mm bore for Indian type Water closet complete all as specified and directed by Engr-in-Charge.

M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and conforming to Fe 410-W Gde E-250 quality 'A', complete inclulidng dismantling of old broken structural steel including doors and gates steel of any description all as specified and as directed.

M&L for 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MoD land complete all as specified and directed by Engr-in-Charge

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc

M&L for 2nd class softwood clean sawn plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 13 Sqcm and n.exc 25 Sqcm in section including dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in framed work complete all as specified and directed.

M&L for 9mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, complete including taking down of old ply wood any type all as specified and directed. Make : DURA PLY/GREEN PLY/DURO/BHUTAN BOARD/ CENTURY/DURIAN

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in wall paneling, cupboard shutters and the like, complete including taking down of old particle boards any type all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in ceiling, complete including taking down of old particle boards any type all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles any type complete all as spfd and directed.Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong

M&L for 2nd class soft wood clean sawn as in scantling fixed with nails, framed and fixed including dismantling timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and directed.complete all as specified and directed.

M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick ) coloured glazed ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thick rendering in CM 1:4 below tile for dado/skirting complete all as specified and directed by Engr-in-Charge. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified.

Factory made 35mm thick IInd Class soft wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S&F for factory made 30mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (b), fixed to chowkhat all as specified and as directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S&F 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and directed by Engr-in-Charge.

S&F aluminum door handle cast type 150 mm in old or new position complete all as specified and directed by Engr-in-Charge.

S&F 250mm long aluminium alloy, anodized, ISI marked, sliding door bolt with hasp & staple (bolt type) not less than 12 mm thick and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 375mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

Preparation of old decorated surfaces of wood and wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. MAKE: NEROLAC PAINTS/ JENSON & NICHOLSON/BERGER PAINTS/ICI DULUXE/ASIAN PAINTS

S&F 0.80 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 and bend to curve (of any radius as per site requirement) including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL

All as per Item No 71.00 but fixing only old sheets obtained from dismantling including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern

M&L for two coats of synthetic enamel paint on new galvanised corrugated sheets incl preparation of new zinc or galvanised surface to receive paint camoflage pattern over a coat of red oxide primer after applying a treatment with modrant solution to remove the galvanisation of CGI sheet complete all as specified and directed. MAKE : BERGER PAINTS/ASIAN PAINTS/NEROLAC PAINTS/ GOODLASS

Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

M&L for coloured chequred cement concrete tiles 30cm X 30cm X 20 mm thick, set ,pointed & jointed in neat cement slurry, as in floors polished with grey cement & pigments, laid over 20mm thick cement screed base (1:4) and all as directed by Engr-in -Charge. Make: NTC/NITCO/ULTRA /JOHNSON

Rendering 15 mm thick on other than fair faces of brick work or stone masonary work, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed. MAKE : Snowcem/Asian/BERGER/DURACEM

S&F Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc complete all as specified and directed by Engr-in-Charge.

M/L for rendering 10 mm thick in cement mortar 1:6 and 2nd layer of 5mm thick in cement mortar 1:4 on external wall brick/concrete surfaces, finished even and smooth without using extra cement, mixed with liquid water proofing admixture for 2nd layer of rendering as per manufacturer's instructions complete all as specified. Note : Water proofing admixture shall be measured and paid separtely as "Supply only" under relevant item of this BOQ.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in CM 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 5 mm thick on fair faces of concrete surfaces, as in ceiling finished even and smooth (without using extra cement) in CM 1:3, complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint of Make Apex (Asian) in any tint, over a coat of primer (as per manufacturer's instruction of Apex) over and including 2 mm thick coat of Birla white wall care putty, as on wall, roof projection, facias, chhajja, etc all as per manufacturer's instructions all as specified and directed by Engr-in-charge. MAKE: BERGER (WEATHER COAT ALL GUARD) / ASIAN (APEX ULTIMA) / NEROLAC (EXCEL TOTAL) / JEHNSON & NICHOLSON / DULUX ICI

Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, over a coat of chalk whitening complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

M&L for preperation of new concrete /plastered ceiling surface of any description and applying three coats of white wash complete all as specified and as directed

Preparation of old plastered surfaces of walls and applying one coat of exterior emulsion paint of Make Apex (Asian) in any tint, over a coat of primer (as per manufacturer's instruction of Apex), as on wall, roof projection, facias, chhajja, etc all as per manufacturer's instructions all as specified and directed by Engr-in-Charge. MAKE: BERGER (WEATHER COAT ALL GUARD) / ASIAN (APEX ULTIMA) / NEROLAC (EXCEL TOTAL) / JEHNSON & NICHOLSON / DULUX ICI

Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Preparation of old surfaces of ceiling by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash to ceiling complete all as specified and directed by Engr-in-Charge.

Preparation of old treated plastered / unplastered surfaces of walls and applying two coats of cement base paints of any shade on walls (shade as approved by users) including curing before and after applying each coat complete all as specified and directed by Engineer-in-Charge. MAKE: SNOWCEM / ASIAN / JEHNSON & NICHOLSON / BERGER / DURACEM

Preparation of old treated plastered / unplastered surfaces of walls and applying one coat of cement base paints of any shade on walls (shade as approved by users) including curing before and after applying each coat complete all as specified and directed by Engineer-in-Charge. MAKE: SNOWCEM / ASIAN / JEHNSON & NICHOLSON / BERGER / DURACEM

M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm not exceeding 0.18 sqm, as in vertical surfaces such as dado/skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in Cement Mortar 1:4 for laying wall tiles complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY

M&L for 20mm thick granite of black shade (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Machine pressed / vibro mechanically floated interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of grey cement and pigment, laid over and including 50mm thick sand cushioning complete including demolition of old paver blocks Shape pattern of laying shall be approved by Engineer-in-charge. Make: NTC/NITCO/ULTRA /JOHNSON

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and direted by Engr-in-Charge.

_________ BLANK ___________

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

Taking down shutters of any description area not exceeding 1 Sqm each, complete all as directed by Engr-in-Charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as directed by Engr-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

Factory made 25mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of single side Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails having one side feathered edge and on other side 10mm 90 degree bent edge with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and as directed. MAKE: SINTEX INDUSTRIES / RAJSHRI PLASTIWOOD LTD / M/S DURA PLAST EXTRACTION PVT LTD/FENESTA / POLYTUFF

Solid factory made PVC Door frame of size 50mmx47mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, supply and fixing in opening as per specification and drawings and incluiding making good disturbed surfaces complete all as specified and directed. MAKE: SINTEX INDUSTRIES / RAJSHRI PLASTIWOOD LTD / M/S DURA PLAST EXTRACTION PVT LTD / FENESTA / POLYTUFF

M&L for 2nd class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store complete all as specified and directed by Engr-in-Charge.

M&L for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.

18/19 mm thick veneered particle boards interior grade, solid core, with decorative face veneers on one side fixed with screws to timber frame work including taking down of old u/s board complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

S & F MS helical door spring 300mm long of ISI marked including roller and roller plate fixed as in repairs complete all as directed by Engineer-in-Charge.

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, hold fasts water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and as directed by the Engr-in-Chage

S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section ISI marked complete all as specified and as directed.

S&F 0.63 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL

All as per Item No 114 but fixing only old sheets obtained from dismantling including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern

S&F 0.8mm thick plain Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL

All as per item No 116 here in before but except sheeting, complete all as specified and directed

Prepainted colored trapezoidal profiled Galvalume/ Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL

Prepainted colored plained Galvalume/Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL

M&L for 6mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, complete including taking down of old ply wood any type all as specified and directed. Make : DURA PLY/GREEN PLY/DURO/BHUTAN BOARD/ CENTURY/DURIAN

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches including taking up or down old steel tubing and connections complete all as specified. MAKE : TATA/JINDAL/BST/Prakash Surya

M&L for 20mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches including taking up or down old steel tubing and connections complete all as specified. MAKE : TATA/JINDAL/BST/Prakash Surya

All as per ser item No 121, here in before but, fixing only including taking up or down old steel tubing and connections

All as per ser item No 122, here in before but, fixing only including taking up or down old steel tubing and connections

PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed in repairs, complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme

Viterous china wash basin, white flat back size 550x400 mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge. MAKE: CERA/HINDWARE/PARRYWARE

600 mm x 450 mm mirror of thickness 5/5.5mm of slected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete, fixed in repairs all as specified and as directed by Engr-in-Charge. MAKE: SAINT GOBAIN/MODI GUARD/TRIVENI FLOAT GLASS

Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) screws and wooden/plastic cleats (Minimum weight 105gms). Make: Prayag/Polytuf/Supreme

S&F Toilet paper holder of coloured vitreous china box type fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge. MAKE: SINTEX/POLYWELL/ROTEX/POLYCON

S&F in repairs 20mm bore ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair Gun metal globe or gate valve 15 mm bore with iron wheel head, screwed both ends for iorn pipe and fixed complete all as specified and directed.

Rotational moulded polyethylene water storage PUF tank, PUF insulated with 75 mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge. MAKE: SINTEX/POLYWELL/ROTEX/POLYCON

S&F in repairs water closet wall hung / padestal pattern coloured (as approved by Engr-in-Charge) Make: CERA CAT No 2035, 2115, 2315, 2235 (CLAIR , single piece suite) incl seat cover or equal approved in Jaquar/Kohler

Taking down eaves swr or rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and acessories)

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe bends any radius complete all as specified and directed.

S&F PVC (SWR) T (Single T) of 110mm to dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia

S&F PVC (SWR) vent cowl 110 mm dia

Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors etc as directed.

M&L for point wiring for one light point or fan point controlled by one switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per Item No 143 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size complete all as specified and as directed.

All as per Item No 143 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as specified and as directed.

All as per ser Item No 143 but for point wiring with 4 sq mm PVC insulated, unsheathed single core stranded copper conductor 1100 Volt grade in PVC capping cassing on wall /floor etc with all accessories of suitable size MS/Pressed steel terminal boxes 1.6 mm thk with bakelite sheet cover (hylum) 3mm thick /PVC Gang box for mounting switch, socket, Cup washers complete with all accessories for one 6 pin 15 Amp socket outlet point on independent board including 4 sqmm PVC insulated copper conductor in green colour common earth and connecting to earth dolly all as specified.

S&F switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Legrand/Crabtree/Cona

S&F for socket outlet 2 in 1 3Pin, 5A, flush type complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 5 in 1, 5/16 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals.all as specified and directed by Engr-in-charge. Make : Anchor/Legrand/Crabtree/Cona

M&L for lamp holder PVC/Polycarbonate type insulated body with back plate suitable for batten fittings as specified and directed. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of 9 watt LED bulb complete all as specified and directed. Make : Havells/Crompton/Bajaj/Philips

S & F for LED light fitting incl LED tube light batten type 1x 20 Watt , mounted on integrated sleek extruded polycarbonate LED channel with white white accrylic cover suitable for 230 Volt 50 Hz cool white colour bipin holder connector block etc complete with all accessories internaly prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete Make : Havells Cat No stoutPlus600Bs20Wled840sPCWH or equal approved in Crompton/Philips/Bajaj

S&F in replacement MCCB 4 pole 200 Amps, 36 kA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4202 48 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

S&F in replacement MCCB 4 pole 400 Amps, 36 kA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4220 07 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

S&F in replacement On Load Change over switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directed. Make : L&T/ABB/Schneider/Siemens/Legrand

S&F in replacement On Load Change over switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directed. Make : L&T/ABB/Schneider/Siemens/Legrand

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI strip of size 25x4mm as earthing leads by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 40mm bore light grade GI protection pipe, test point etc complete including taking down of old u/s earthing set all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order (iii) Item includes the cost of Charcoal and commercial salt

All as per ser Item No 143 but for point wiring with 2.5 sq mm PVC insulated, unsheathed single core stranded copper conductor 1100 Volt grade in PVC capping cassing on wall /floor etc with all accessories of suitable size MS/Pressed steel terminal boxes 1.6 mm thk with bakelite sheet cover (hylum) 3mm thick /PVC Gang box for mounting switch, socket, Cup washers complete with all accessories for one 6 pin 15 Amp socket outlet point on independent board including 1.5 sqmm PVC insulated copper conductor in green colour common earth and connecting to earth dolly all as specified.

S&F for socket outlet 2 in 1 3Pin, 5Amp/15Amp, flush type complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 3 pin, 16 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of 7 watt LED bulb complete all as specified and directed. Make : Havells/Crompton/Bajaj/Philips

Supply and Fixing Surface/wall mounted LED fittings with LED tube 18 watts capacity decorative ultra slim elegance LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient type 4 feet long channel type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings Make: Havells, Model : 18W LED 6500K,or equivalent in Syska/Phillips/CG.

S&F in replacement MCB distribution board double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc complete all as specified and directed. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

S&F in replacement MCB SPN 40 Amps, 'C' series, 230 V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 18 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

S&F in replacement MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc including taking down old earthing material complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order (iii) Item includes the cost of Charcoal and commercial salt

Supplying and laying in replacement electric service connection with 2 core, 10 Sqmm 1100 volts Aluminium conductor (Stranded conductor) cable served with inner sheathing of PVC tape armoured with G.I wire or tape and overall PVC sheathed suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular. Make : L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

M/S Praveen Kumar and Sons

Rampal Singh Contractor