Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.0 LAWARDED | AWARDED |
Tender Value
₹7.4 L
EMD Value
₹15,750
Closing Date
3 Nov 2025, 9:30 pmClosed
Rural Development and Panchayat Raj Department
Construction of store room and staircase to Deputy director of horticulture office zilla panchayath Mandya in Mandya city
RDPR/2025-26/BD/WORK_INDENT19745
RDPR/2025-26/BD/WORK_INDENT19745
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Mandya
₹500
₹15,750
18 Oct 2025
18 Oct 2025
4 Nov 2025
31 Oct 2025
Construction of store room and staircase to Deputy director of horticulture office zilla panchayath Mandya in Mandya city
Dismantling tile work in floors and roofs laid in cement mortar include ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 2...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corner...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Supplying heavy gauge PVC conduit pipe......mmdia.........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc.,and running before concreting the slab....
Supplying heavy gauge PVCConduit Pipe .... dia .......mmthick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing Uor Jhooks and cem...
Supplying And Fixing Metal Fan Box with Round Hook.
Supplying and fixing PVC/metal conduit Deep junction box. 19/20 mm deep Junction box.
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The boxe should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1-...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The boxe should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.6 ...
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The boxe should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expa...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .